From 2628932a40d769d8d0180ba6fed1e7b9b2718982 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 3 May 2020 19:53:02 +0200 Subject: minkbd: repo restructure --- Blink/Drivers/CMSIS/Include/core_cm1.h | 976 --------------------------------- 1 file changed, 976 deletions(-) delete mode 100644 Blink/Drivers/CMSIS/Include/core_cm1.h (limited to 'Blink/Drivers/CMSIS/Include/core_cm1.h') diff --git a/Blink/Drivers/CMSIS/Include/core_cm1.h b/Blink/Drivers/CMSIS/Include/core_cm1.h deleted file mode 100644 index fd1c407..0000000 --- a/Blink/Drivers/CMSIS/Include/core_cm1.h +++ /dev/null @@ -1,976 +0,0 @@ -/**************************************************************************//** - * @file core_cm1.h - * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File - * @version V1.0.0 - * @date 23. July 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM1_H_GENERIC -#define __CORE_CM1_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M1 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM1 definitions */ -#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ - __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (1U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM1_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM1_H_DEPENDANT -#define __CORE_CM1_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM1_REV - #define __CM1_REV 0x0100U - #warning "__CM1_REV not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M1 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t _reserved0:1; /*!< bit: 0 Reserved */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - uint32_t RESERVED0; - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ -#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ - -#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ -#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the Cortex-M1 header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ -/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - Address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)0x0U; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)0x0U; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM1_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ -- cgit