From ff82e6358058924a7bc92bcfcdb3aece48faf08e Mon Sep 17 00:00:00 2001 From: Jan Henrik Date: Wed, 1 Apr 2020 01:12:57 +0200 Subject: Create README.md --- hid-dials/README.md | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 hid-dials/README.md diff --git a/hid-dials/README.md b/hid-dials/README.md new file mode 100644 index 0000000..848d749 --- /dev/null +++ b/hid-dials/README.md @@ -0,0 +1,17 @@ +# HID implementation for IBM-dials-retrofit + +Works, currently hardcoded: + + - Dial 1: Volume Up/Down + - Dial 2: nothing + - Dial 3: KiCAD switch layer (v) + - Dial 4: KiCAD rotate part (r|R) + - Dial 5: KiCAD change grid settings (n|N) + - Dial 6: nothing + - Dial 7: KiCAD change track width (w|W) + - Dial 8: KiCAD zoom (+|-) + + Todo: + + [ ] Add filesystem and csv alike config files + -- cgit From 462d79e7d9b27ebf839439f413752b2c3b2127f3 Mon Sep 17 00:00:00 2001 From: Jan Henrik Date: Wed, 1 Apr 2020 01:22:00 +0200 Subject: Update README.md --- README.md | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index 091c661..cb3e88e 100644 --- a/README.md +++ b/README.md @@ -1,7 +1,12 @@ # IBM-dials-retrofit -Software and hardware instructions to retrofit your IBM Dials :3 +This repo contains the firmware and hardware instructions to retrofit your *IBM Dials* with a full-speed USB interface, cabable of CDC, MIDI and HID. The mod uses an OtterPill, a STM32F072 devboard featuring USB-PD. This feature however is not needed and the PD-phy should be replaced with two 5.1k-ohm resistors. Additionally an IBM Dials and a 3D printed Otter-Pill mount is needed. + +The firmware on the OtterPill can be customized and used for a variety of applications, e.g. [KiCAD](https://twitter.com/JanHenrikH/status/1245113168621449217). **Documentation is WIP** ![](images/1.jpeg) + +## Building instructions + -- cgit