summaryrefslogtreecommitdiff
path: root/hid-dials/Src
diff options
context:
space:
mode:
Diffstat (limited to 'hid-dials/Src')
-rw-r--r--hid-dials/Src/main.c446
-rw-r--r--hid-dials/Src/stm32f0xx_hal_msp.c191
-rw-r--r--hid-dials/Src/stm32f0xx_it.c176
-rw-r--r--hid-dials/Src/system_stm32f0xx.c265
-rw-r--r--hid-dials/Src/usb_device.c107
-rw-r--r--hid-dials/Src/usbd_conf.c775
-rw-r--r--hid-dials/Src/usbd_desc.c365
-rw-r--r--hid-dials/Src/usbd_hid.c615
8 files changed, 2940 insertions, 0 deletions
diff --git a/hid-dials/Src/main.c b/hid-dials/Src/main.c
new file mode 100644
index 0000000..58c40ad
--- /dev/null
+++ b/hid-dials/Src/main.c
@@ -0,0 +1,446 @@
+
+#include "main.h"
+#include "usb_device.h"
+#include "usbd_hid.h"
+
+#define HID_MEDIA_REPORT 2
+#define HYSTERESIS 200
+
+ADC_HandleTypeDef hadc;
+DMA_HandleTypeDef hdma_adc;
+
+PCD_HandleTypeDef hpcd_USB_FS;
+
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_DMA_Init(void);
+static void MX_ADC_Init(void);
+static void MX_USB_PCD_Init(void);
+
+void sendVolDown(void);
+void sendVolUp(void);
+
+struct key_t
+{
+ uint8_t id;
+ uint8_t modifier;
+ uint8_t reserved;
+ uint8_t keycode[6];
+} key;
+
+uint16_t ADCreg[8];
+uint16_t ADCval[8];
+uint16_t ADClast[8];
+
+int main(void)
+{
+ HAL_Init();
+
+ SystemClock_Config();
+
+ MX_GPIO_Init();
+ MX_DMA_Init();
+ MX_ADC_Init();
+ MX_USB_HID_INIT();
+
+ HAL_ADC_Start_DMA(&hadc, ADCreg, 8);
+
+ while (1)
+ {
+
+
+ for(int i = 0; i < 8; i++){
+ ADCval[i] = ADCreg[i];
+ if(ADCval[i] - ADClast[i] > 2000 || ADClast[i] - ADCval[i] > 2000 ) ADClast[i] = ADCval[i];
+ }
+
+ // Volume Dial 8
+ if(ADCval[0] >= ADClast[0] + HYSTERESIS){
+ sendVolUp();
+ ADClast[0] = ADCval[0];
+ } else if(ADCval[0] <= ADClast[0] - HYSTERESIS){
+ sendVolDown();
+ ADClast[0] = ADCval[0];
+ }
+
+ // Dial 1
+ if(ADCval[1] >= ADClast[1] + HYSTERESIS){
+ } else if(ADCval[1] <= ADClast[1] - HYSTERESIS){
+ }
+
+ // SwitchLayer
+ if(ADCval[2] >= ADClast[2] + HYSTERESIS){
+ sendChar('v');
+ ADClast[2] = ADCval[2];
+ } else if(ADCval[2] <= ADClast[2] - HYSTERESIS){
+ sendChar('v');
+ ADClast[2] = ADCval[2];
+ }
+
+ // RotatePart Dial 3
+ if(ADCval[3] >= ADClast[3] + HYSTERESIS){
+ sendChar('R');
+ ADClast[3] = ADCval[3];
+ } else if(ADCval[3] <= ADClast[3] - HYSTERESIS){
+ sendChar('r');
+ ADClast[3] = ADCval[3];
+ }
+
+ // Grid Dial 4
+ if(ADCval[4] >= ADClast[4] + HYSTERESIS){
+ sendChar('n');
+ ADClast[4] = ADCval[4];
+ } else if(ADCval[4] <= ADClast[4] - HYSTERESIS){
+ sendChar('N');
+ ADClast[4] = ADCval[4];
+ }
+
+ // via
+ if(ADCval[5] >= ADClast[5] + HYSTERESIS){
+ } else if(ADCval[5] <= ADClast[5] - HYSTERESIS){
+ }
+
+ // Trackwidth Dial 6
+ if(ADCval[6] >= ADClast[6] + HYSTERESIS){
+ sendChar('w');
+ ADClast[6] = ADCval[6];
+ } else if(ADCval[6] <= ADClast[6] - HYSTERESIS){
+ sendChar('W');
+ ADClast[6] = ADCval[6];
+ }
+
+ // zoom
+ if(ADCval[7] >= ADClast[7] + HYSTERESIS){
+ sendCharWrong(0x3a);
+ ADClast[7] = ADCval[7];
+ } else if(ADCval[7] <= ADClast[7] - HYSTERESIS){
+ sendCharWrong(0x3b);
+ ADClast[7] = ADCval[7];
+ }
+
+ HAL_Delay(10);
+ }
+}
+
+
+const uint8_t _asciimap[128] =
+{
+ 0x00, // NUL
+ 0x00, // SOH
+ 0x00, // STX
+ 0x00, // ETX
+ 0x00, // EOT
+ 0x00, // ENQ
+ 0x00, // ACK
+ 0x00, // BEL
+ 0x2a, // BS Backspace
+ 0x2b, // TAB Tab
+ 0x28, // LF Enter
+ 0x00, // VT
+ 0x00, // FF
+ 0x00, // CR
+ 0x00, // SO
+ 0x00, // SI
+ 0x00, // DEL
+ 0x00, // DC1
+ 0x00, // DC2
+ 0x00, // DC3
+ 0x00, // DC4
+ 0x00, // NAK
+ 0x00, // SYN
+ 0x00, // ETB
+ 0x00, // CAN
+ 0x00, // EM
+ 0x00, // SUB
+ 0x00, // ESC
+ 0x00, // FS
+ 0x00, // GS
+ 0x00, // RS
+ 0x00, // US
+
+ 0x2c, // ' '
+ 0x1e|0x80, // !
+ 0x34|0x80, // "
+ 0x20|0x80, // #
+ 0x21|0x80, // $
+ 0x22|0x80, // %
+ 0x24|0x80, // &
+ 0x34, // '
+ 0x26|0x80, // (
+ 0x27|0x80, // )
+ 0x25|0x80, // *
+ 0x2e|0x80, // +
+ 0x36, // ,
+ 0x2d, // -
+ 0x37, // .
+ 0x38, // /
+ 0x27, // 0
+ 0x1e, // 1
+ 0x1f, // 2
+ 0x20, // 3
+ 0x21, // 4
+ 0x22, // 5
+ 0x23, // 6
+ 0x24, // 7
+ 0x25, // 8
+ 0x26, // 9
+ 0x33|0x80, // :
+ 0x33, // ;
+ 0x36|0x80, // <
+ 0x2e, // =
+ 0x37|0x80, // >
+ 0x38|0x80, // ?
+ 0x1f|0x80, // @
+ 0x04|0x80, // A
+ 0x05|0x80, // B
+ 0x06|0x80, // C
+ 0x07|0x80, // D
+ 0x08|0x80, // E
+ 0x09|0x80, // F
+ 0x0a|0x80, // G
+ 0x0b|0x80, // H
+ 0x0c|0x80, // I
+ 0x0d|0x80, // J
+ 0x0e|0x80, // K
+ 0x0f|0x80, // L
+ 0x10|0x80, // M
+ 0x11|0x80, // N
+ 0x12|0x80, // O
+ 0x13|0x80, // P
+ 0x14|0x80, // Q
+ 0x15|0x80, // R
+ 0x16|0x80, // S
+ 0x17|0x80, // T
+ 0x18|0x80, // U
+ 0x19|0x80, // V
+ 0x1a|0x80, // W
+ 0x1b|0x80, // X
+ 0x1c|0x80, // Y
+ 0x1d|0x80, // Z
+ 0x2f, // [
+ 0x31, // bslash
+ 0x30, // ]
+ 0x23|0x80, // ^
+ 0x2d|0x80, // _
+ 0x35, // `
+ 0x04, // a
+ 0x05, // b
+ 0x06, // c
+ 0x07, // d
+ 0x08, // e
+ 0x09, // f
+ 0x0a, // g
+ 0x0b, // h
+ 0x0c, // i
+ 0x0d, // j
+ 0x0e, // k
+ 0x0f, // l
+ 0x10, // m
+ 0x11, // n
+ 0x12, // o
+ 0x13, // p
+ 0x14, // q
+ 0x15, // r
+ 0x16, // s
+ 0x17, // t
+ 0x18, // u
+ 0x19, // v
+ 0x1a, // w
+ 0x1b, // x
+ 0x1c, // y
+ 0x1d, // z
+ 0x2f|0x80, // {
+ 0x31|0x80, // |
+ 0x30|0x80, // }
+ 0x35|0x80, // ~
+ 0 // DEL
+};
+
+
+void sendChar(uint8_t ch){
+ if( ch > 128 ) ch -=128;
+
+ key.id = 1;
+ key.keycode[0]=_asciimap[ch]&0x7F;
+ key.keycode[1]=0;
+
+ if ( _asciimap[ch] & 0x80) key.modifier |= 0x02;
+
+ for(int i=0; i< 4;i++){
+ USBD_HID_SendReport(&hUsbDeviceFS, (uint8_t *)&key, sizeof(key));
+ HAL_Delay(10);
+ }
+ memset(key.keycode, 0 , sizeof(key.keycode));
+ key.modifier = 0;
+ USBD_HID_SendReport(&hUsbDeviceFS, (uint8_t *)&key, sizeof(key));
+ HAL_Delay(10);
+}
+
+void sendCharWrong(uint8_t ch){
+ key.id = 1;
+ key.keycode[0]=ch&0x7F;
+ key.keycode[1]=0;
+
+ if ( _asciimap[ch] & 0x80) key.modifier |= 0x02;
+
+ for(int i=0; i< 4;i++){
+ USBD_HID_SendReport(&hUsbDeviceFS, (uint8_t *)&key, sizeof(key));
+ HAL_Delay(10);
+ }
+ memset(key.keycode, 0 , sizeof(key.keycode));
+ key.modifier = 0;
+ USBD_HID_SendReport(&hUsbDeviceFS, (uint8_t *)&key, sizeof(key));
+ HAL_Delay(10);
+}
+
+void sendVolUp(){
+ uint8_t report[3];
+ report[0]= HID_MEDIA_REPORT;
+ report[1]= 0xE9;
+ report[2]= 0x00;
+ USBD_HID_SendReport(&hUsbDeviceFS, report, 3);
+ HAL_Delay(10);
+
+ report[0]= HID_MEDIA_REPORT;
+ report[1]= 0x00;
+ report[2]= 0x00;
+ USBD_HID_SendReport(&hUsbDeviceFS, report, 3);
+}
+
+void sendVolDown(){
+ uint8_t report[3];
+ report[0]= HID_MEDIA_REPORT;
+ report[1]= 0xEA;
+ report[2]= 0x00;
+ USBD_HID_SendReport(&hUsbDeviceFS, report, 3);
+ HAL_Delay(10);
+
+ report[0]= HID_MEDIA_REPORT;
+ report[1]= 0x00;
+ report[2]= 0x00;
+ USBD_HID_SendReport(&hUsbDeviceFS, report, 3);
+}
+
+void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+ RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI14|RCC_OSCILLATORTYPE_HSI48;
+ RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+ RCC_OscInitStruct.HSI14State = RCC_HSI14_ON;
+ RCC_OscInitStruct.HSI14CalibrationValue = 16;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+ |RCC_CLOCKTYPE_PCLK1;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI48;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+ HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1);
+
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
+ PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+ HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
+
+}
+
+static void MX_ADC_Init(void)
+{
+
+ ADC_ChannelConfTypeDef sConfig = {0};
+
+ hadc.Instance = ADC1;
+ hadc.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
+ hadc.Init.Resolution = ADC_RESOLUTION_12B;
+ hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
+ hadc.Init.EOCSelection = ADC_EOC_SEQ_CONV;
+ hadc.Init.LowPowerAutoWait = DISABLE;
+ hadc.Init.LowPowerAutoPowerOff = DISABLE;
+ hadc.Init.ContinuousConvMode = ENABLE;
+ hadc.Init.DiscontinuousConvMode = DISABLE;
+ hadc.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+ hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+ hadc.Init.DMAContinuousRequests = ENABLE;
+ hadc.Init.Overrun = ADC_OVR_DATA_PRESERVED;
+ HAL_ADC_Init(&hadc);
+
+ sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
+ sConfig.SamplingTime = ADC_SAMPLETIME_71CYCLES_5;
+ sConfig.Channel = ADC_CHANNEL_1;
+ HAL_ADC_ConfigChannel(&hadc, &sConfig);
+
+ sConfig.Channel = ADC_CHANNEL_2;
+ HAL_ADC_ConfigChannel(&hadc, &sConfig);
+
+ sConfig.Channel = ADC_CHANNEL_3;
+ HAL_ADC_ConfigChannel(&hadc, &sConfig);
+
+ sConfig.Channel = ADC_CHANNEL_4;
+ HAL_ADC_ConfigChannel(&hadc, &sConfig);
+
+ sConfig.Channel = ADC_CHANNEL_5;
+ HAL_ADC_ConfigChannel(&hadc, &sConfig);
+
+ sConfig.Channel = ADC_CHANNEL_6;
+ HAL_ADC_ConfigChannel(&hadc, &sConfig);
+
+ sConfig.Channel = ADC_CHANNEL_7;
+ HAL_ADC_ConfigChannel(&hadc, &sConfig);
+
+ sConfig.Channel = ADC_CHANNEL_8;
+ HAL_ADC_ConfigChannel(&hadc, &sConfig);
+}
+
+static void MX_USB_PCD_Init(void)
+{
+
+ hpcd_USB_FS.Instance = USB;
+ hpcd_USB_FS.Init.dev_endpoints = 8;
+ hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
+ hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
+ hpcd_USB_FS.Init.low_power_enable = DISABLE;
+ hpcd_USB_FS.Init.lpm_enable = DISABLE;
+ hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
+ HAL_PCD_Init(&hpcd_USB_FS);
+}
+
+
+static void MX_DMA_Init(void)
+{
+ __HAL_RCC_DMA1_CLK_ENABLE();
+
+ HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0);
+ HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
+}
+
+
+static void MX_GPIO_Init(void)
+{
+
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_13, GPIO_PIN_RESET);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_13;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+}
+
+void Error_Handler(void)
+{
+ while(1){
+ HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,1);
+ HAL_Delay(100);
+ HAL_GPIO_WritePin(GPIOB,GPIO_PIN_13,0);
+ HAL_Delay(100);
+ }
+}
diff --git a/hid-dials/Src/stm32f0xx_hal_msp.c b/hid-dials/Src/stm32f0xx_hal_msp.c
new file mode 100644
index 0000000..8695580
--- /dev/null
+++ b/hid-dials/Src/stm32f0xx_hal_msp.c
@@ -0,0 +1,191 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * File Name : stm32f0xx_hal_msp.c
+ * Description : This file provides code for the MSP Initialization
+ * and de-Initialization codes.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+extern DMA_HandleTypeDef hdma_adc;
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+ * Initializes the Global MSP.
+ */
+void HAL_MspInit(void)
+{
+ /* USER CODE BEGIN MspInit 0 */
+
+ /* USER CODE END MspInit 0 */
+
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* System interrupt init*/
+
+ /* USER CODE BEGIN MspInit 1 */
+
+ /* USER CODE END MspInit 1 */
+}
+
+/**
+* @brief ADC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(hadc->Instance==ADC1)
+ {
+ /* USER CODE BEGIN ADC1_MspInit 0 */
+
+ /* USER CODE END ADC1_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_ADC1_CLK_ENABLE();
+
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ /**ADC GPIO Configuration
+ PA0 ------> ADC_IN0
+ PA1 ------> ADC_IN1
+ PA2 ------> ADC_IN2
+ PA3 ------> ADC_IN3
+ PA4 ------> ADC_IN4
+ PA5 ------> ADC_IN5
+ PA6 ------> ADC_IN6
+ PA7 ------> ADC_IN7
+ PB0 ------> ADC_IN8
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+ |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_0;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /* ADC1 DMA Init */
+ /* ADC Init */
+ hdma_adc.Instance = DMA1_Channel1;
+ hdma_adc.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ hdma_adc.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma_adc.Init.MemInc = DMA_MINC_ENABLE;
+ hdma_adc.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
+ hdma_adc.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
+ hdma_adc.Init.Mode = DMA_CIRCULAR;
+ hdma_adc.Init.Priority = DMA_PRIORITY_MEDIUM;
+ if (HAL_DMA_Init(&hdma_adc) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ __HAL_LINKDMA(hadc,DMA_Handle,hdma_adc);
+
+ /* USER CODE BEGIN ADC1_MspInit 1 */
+
+ /* USER CODE END ADC1_MspInit 1 */
+ }
+
+}
+
+/**
+* @brief ADC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+ if(hadc->Instance==ADC1)
+ {
+ /* USER CODE BEGIN ADC1_MspDeInit 0 */
+
+ /* USER CODE END ADC1_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_ADC1_CLK_DISABLE();
+
+ /**ADC GPIO Configuration
+ PA0 ------> ADC_IN0
+ PA1 ------> ADC_IN1
+ PA2 ------> ADC_IN2
+ PA3 ------> ADC_IN3
+ PA4 ------> ADC_IN4
+ PA5 ------> ADC_IN5
+ PA6 ------> ADC_IN6
+ PA7 ------> ADC_IN7
+ PB0 ------> ADC_IN8
+ */
+ HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+ |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
+
+ HAL_GPIO_DeInit(GPIOB, GPIO_PIN_0);
+
+ /* ADC1 DMA DeInit */
+ HAL_DMA_DeInit(hadc->DMA_Handle);
+ /* USER CODE BEGIN ADC1_MspDeInit 1 */
+
+ /* USER CODE END ADC1_MspDeInit 1 */
+ }
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hid-dials/Src/stm32f0xx_it.c b/hid-dials/Src/stm32f0xx_it.c
new file mode 100644
index 0000000..3d94908
--- /dev/null
+++ b/hid-dials/Src/stm32f0xx_it.c
@@ -0,0 +1,176 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file stm32f0xx_it.c
+ * @brief Interrupt Service Routines.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f0xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern DMA_HandleTypeDef hdma_adc;
+extern PCD_HandleTypeDef hpcd_USB_FS;
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/* Cortex-M0 Processor Interruption and Exception Handlers */
+/******************************************************************************/
+/**
+ * @brief This function handles Non maskable interrupt.
+ */
+void NMI_Handler(void)
+{
+ /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+ /* USER CODE END NonMaskableInt_IRQn 0 */
+ /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+ /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Hard fault interrupt.
+ */
+void HardFault_Handler(void)
+{
+ /* USER CODE BEGIN HardFault_IRQn 0 */
+
+ /* USER CODE END HardFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+ /* USER CODE END W1_HardFault_IRQn 0 */
+ }
+}
+
+/**
+ * @brief This function handles System service call via SWI instruction.
+ */
+void SVC_Handler(void)
+{
+ /* USER CODE BEGIN SVC_IRQn 0 */
+
+ /* USER CODE END SVC_IRQn 0 */
+ /* USER CODE BEGIN SVC_IRQn 1 */
+
+ /* USER CODE END SVC_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Pendable request for system service.
+ */
+void PendSV_Handler(void)
+{
+ /* USER CODE BEGIN PendSV_IRQn 0 */
+
+ /* USER CODE END PendSV_IRQn 0 */
+ /* USER CODE BEGIN PendSV_IRQn 1 */
+
+ /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+ * @brief This function handles System tick timer.
+ */
+void SysTick_Handler(void)
+{
+ /* USER CODE BEGIN SysTick_IRQn 0 */
+
+ /* USER CODE END SysTick_IRQn 0 */
+ HAL_IncTick();
+ /* USER CODE BEGIN SysTick_IRQn 1 */
+
+ /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F0xx Peripheral Interrupt Handlers */
+/* Add here the Interrupt Handlers for the used peripherals. */
+/* For the available peripheral interrupt handler names, */
+/* please refer to the startup file (startup_stm32f0xx.s). */
+/******************************************************************************/
+
+/**
+ * @brief This function handles DMA1 channel 1 global interrupt.
+ */
+void DMA1_Channel1_IRQHandler(void)
+{
+ /* USER CODE BEGIN DMA1_Channel1_IRQn 0 */
+
+ /* USER CODE END DMA1_Channel1_IRQn 0 */
+ HAL_DMA_IRQHandler(&hdma_adc);
+ /* USER CODE BEGIN DMA1_Channel1_IRQn 1 */
+
+ /* USER CODE END DMA1_Channel1_IRQn 1 */
+}
+
+/**
+* @brief This function handles USB global Interrupt / USB wake-up interrupt through EXTI line 18.
+*/
+void USB_IRQHandler(void)
+{
+ /* USER CODE BEGIN USB_IRQn 0 */
+
+ /* USER CODE END USB_IRQn 0 */
+ HAL_PCD_IRQHandler(&hpcd_USB_FS);
+ /* USER CODE BEGIN USB_IRQn 1 */
+
+ /* USER CODE END USB_IRQn 1 */
+}
+
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hid-dials/Src/system_stm32f0xx.c b/hid-dials/Src/system_stm32f0xx.c
new file mode 100644
index 0000000..6a3202b
--- /dev/null
+++ b/hid-dials/Src/system_stm32f0xx.c
@@ -0,0 +1,265 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f0xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f0xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f0xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. This file configures the system clock as follows:
+ *=============================================================================
+ * Supported STM32F0xx device
+ *-----------------------------------------------------------------------------
+ * System Clock source | HSI
+ *-----------------------------------------------------------------------------
+ * SYSCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * HCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * AHB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB1 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f0xx.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Defines
+ * @{
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI48_VALUE */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock there is no need to
+ call the 2 first functions listed above, since SystemCoreClock variable is
+ updated automatically.
+ */
+uint32_t SystemCoreClock = 8000000;
+
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* NOTE :SystemInit(): This function is called at startup just after reset and
+ before branch to main program. This call is made inside
+ the "startup_stm32f0xx.s" file.
+ User can setups the default system clock (System clock source, PLL Multiplier
+ and Divider factors, AHB/APBx prescalers and Flash settings).
+ */
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f0xx_hal.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f0xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+ pllmull = ( pllmull >> 18) + 2;
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+
+ if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */
+ SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull;
+ }
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+ else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
+ {
+ /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */
+ SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull;
+ }
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+ else
+ {
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \
+ || defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) \
+ || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+ /* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */
+ SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull;
+#else
+ /* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 ||
+ STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB ||
+ STM32F091xC || STM32F098xx || STM32F030xC */
+ }
+ break;
+ default: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/hid-dials/Src/usb_device.c b/hid-dials/Src/usb_device.c
new file mode 100644
index 0000000..dc6a44f
--- /dev/null
+++ b/hid-dials/Src/usb_device.c
@@ -0,0 +1,107 @@
+/**
+ ******************************************************************************
+ * @file : usb_device.c
+ * @version : v2.0_Cube
+ * @brief : This file implements the USB Device
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "usb_device.h"
+#include "usbd_core.h"
+#include "usbd_desc.h"
+
+/* USER CODE BEGIN Includes */
+#include "usbd_hid.h"
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+/* USER CODE BEGIN PFP */
+/* Private function prototypes -----------------------------------------------*/
+
+/* USER CODE END PFP */
+
+/* USB Device Core handle declaration. */
+USBD_HandleTypeDef hUsbDeviceFS;
+
+/*
+ * -- Insert your variables declaration here --
+ */
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*
+ * -- Insert your external function declaration here --
+ */
+/* USER CODE BEGIN 1 */
+
+void MX_USB_HID_INIT(void)
+{
+ USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS);
+
+ USBD_RegisterClass(&hUsbDeviceFS, &USBD_HID);
+
+ USBD_Start(&hUsbDeviceFS);
+}
+
+/* USER CODE END 1 */
+
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hid-dials/Src/usbd_conf.c b/hid-dials/Src/usbd_conf.c
new file mode 100644
index 0000000..cb09894
--- /dev/null
+++ b/hid-dials/Src/usbd_conf.c
@@ -0,0 +1,775 @@
+/**
+ ******************************************************************************
+ * @file : usbd_conf.c
+ * @version : v2.0_Cube
+ * @brief : This file implements the board support package for the USB device library
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+#include "stm32f0xx_hal.h"
+#include "usbd_def.h"
+#include "usbd_core.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+PCD_HandleTypeDef hpcd_USB_FS;
+//void _Error_Handler(char * file, int line);
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* USER CODE BEGIN PFP */
+/* Private function prototypes -----------------------------------------------*/
+
+/* USER CODE END PFP */
+
+/* Private functions ---------------------------------------------------------*/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
+//extern void SystemClock_Config(void);
+
+/*******************************************************************************
+ LL Driver Callbacks (PCD -> USB Device Library)
+*******************************************************************************/
+/* MSP Init */
+
+void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
+{
+ if(pcdHandle->Instance==USB)
+ {
+ /* USER CODE BEGIN USB_MspInit 0 */
+
+ /* USER CODE END USB_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_USB_CLK_ENABLE();
+
+ /* Peripheral interrupt init */
+ HAL_NVIC_SetPriority(USB_IRQn, 1, 0);
+ HAL_NVIC_EnableIRQ(USB_IRQn);
+ /* USER CODE BEGIN USB_MspInit 1 */
+
+ /* USER CODE END USB_MspInit 1 */
+ }
+}
+
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
+{
+ if(pcdHandle->Instance==USB)
+ {
+ /* USER CODE BEGIN USB_MspDeInit 0 */
+
+ /* USER CODE END USB_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_USB_CLK_DISABLE();
+
+ /* Peripheral interrupt Deinit*/
+ HAL_NVIC_DisableIRQ(USB_IRQn);
+
+ /* USER CODE BEGIN USB_MspDeInit 1 */
+
+ /* USER CODE END USB_MspDeInit 1 */
+ }
+}
+
+/**
+ * @brief Setup stage callback
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
+}
+
+/**
+ * @brief Data Out stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
+}
+
+/**
+ * @brief Data In stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
+}
+
+/**
+ * @brief SOF callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief Reset callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
+
+ /* Set USB current speed. */
+ switch (hpcd->Init.speed)
+ {
+ case PCD_SPEED_FULL:
+ speed = USBD_SPEED_FULL;
+ break;
+
+ default:
+ speed = USBD_SPEED_FULL;
+ break;
+ }
+ USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed);
+
+ /* Reset Device. */
+ USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief Suspend callback.
+ * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Inform USB library that core enters in suspend Mode. */
+ USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
+ /* Enter in STOP mode. */
+ /* USER CODE BEGIN 2 */
+ if (hpcd->Init.low_power_enable)
+ {
+ /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
+ SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
+ }
+ /* USER CODE END 2 */
+}
+
+/**
+ * @brief Resume callback.
+ * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* USER CODE BEGIN 3 */
+
+ /* USER CODE END 3 */
+ USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief ISOOUTIncomplete callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
+}
+
+/**
+ * @brief ISOINIncomplete callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
+}
+
+/**
+ * @brief Connect callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief Disconnect callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/*******************************************************************************
+ LL Driver Interface (USB Device Library --> PCD)
+*******************************************************************************/
+
+/**
+ * @brief Initializes the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
+{
+ /* Init USB Ip. */
+ /* Link the driver to the stack. */
+ hpcd_USB_FS.pData = pdev;
+ pdev->pData = &hpcd_USB_FS;
+
+ hpcd_USB_FS.Instance = USB;
+ hpcd_USB_FS.Init.dev_endpoints = 8;
+ hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
+ hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_64;
+ hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
+ hpcd_USB_FS.Init.low_power_enable = DISABLE;
+ hpcd_USB_FS.Init.lpm_enable = DISABLE;
+ hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
+ if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
+ {
+ //_Error_Handler(__FILE__, __LINE__);
+ }
+
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18);
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58);
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0);
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110);
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100);
+ return USBD_OK;
+}
+
+/**
+ * @brief De-Initializes the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_DeInit(pdev->pData);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Starts the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_Start(pdev->pData);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Stops the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_Stop(pdev->pData);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Opens an endpoint of the low level driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @param ep_type: Endpoint type
+ * @param ep_mps: Endpoint max packet size
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Closes an endpoint of the low level driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Flushes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Sets a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Clears a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Returns Stall condition.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval Stall (1: Yes, 0: No)
+ */
+uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
+
+ if((ep_addr & 0x80) == 0x80)
+ {
+ return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
+ }
+ else
+ {
+ return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
+ }
+}
+
+/**
+ * @brief Assigns a USB address to the device.
+ * @param pdev: Device handle
+ * @param dev_addr: Device address
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Transmits data over an endpoint.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @param pbuf: Pointer to data to be sent
+ * @param size: Data size
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Prepares an endpoint for reception.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @param pbuf: Pointer to data to be received
+ * @param size: Data size
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Returns the last transfered packet size.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval Recived Data Size
+ */
+uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
+}
+
+/**
+ * @brief Delays routine for the USB device library.
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void USBD_LL_Delay(uint32_t Delay)
+{
+ HAL_Delay(Delay);
+}
+
+/**
+ * @brief Static single allocation.
+ * @param size: Size of allocated memory
+ * @retval None
+ */
+//void *USBD_static_malloc(uint32_t size)
+//{
+// static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */
+// return mem;
+//}
+
+/**
+ * @brief Dummy memory free
+ * @param p: Pointer to allocated memory address
+ * @retval None
+ */
+void USBD_static_free(void *p)
+{
+
+}
+
+/* USER CODE BEGIN 5 */
+/**
+ * @brief Configures system clock after wake-up from USB Resume CallBack:
+ * enable HSI, PLL and select PLL as system clock source.
+ * @retval None
+ */
+//static void SystemClockConfig_Resume(void)
+//{
+// SystemClock_Config();
+//}
+/* USER CODE END 5 */
+
+/**
+ * @brief Software device connection
+ * @param hpcd: PCD handle
+ * @param state: Connection state (0: disconnected / 1: connected)
+ * @retval None
+ */
+void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
+{
+ /* USER CODE BEGIN 6 */
+ if (state == 1)
+ {
+ /* Configure Low connection state. */
+
+ }
+ else
+ {
+ /* Configure High connection state */
+
+ }
+ /* USER CODE END 6 */
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hid-dials/Src/usbd_desc.c b/hid-dials/Src/usbd_desc.c
new file mode 100644
index 0000000..cf30160
--- /dev/null
+++ b/hid-dials/Src/usbd_desc.c
@@ -0,0 +1,365 @@
+/**
+ ******************************************************************************
+ * @file : usbd_desc.c
+ * @version : v2.0_Cube
+ * @brief : This file implements the USB device descriptors.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_conf.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @addtogroup USBD_DESC
+ * @{
+ */
+
+/** @defgroup USBD_DESC_Private_TypesDefinitions USBD_DESC_Private_TypesDefinitions
+ * @brief Private types.
+ * @{
+ */
+
+/* USER CODE BEGIN PRIVATE_TYPES */
+
+/* USER CODE END PRIVATE_TYPES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Defines USBD_DESC_Private_Defines
+ * @brief Private defines.
+ * @{
+ */
+
+/*
+ *************************************************[ATTENTION]************************************************
+ *
+ * VID 0x1209 and PID 0x0001 is experimental IDs from http://pid.codes .
+ * You must get your own IDs, and change to your own IDs in order to avoid conflicting to other USB devices.
+ *
+ ************************************************************************************************************
+*/
+
+#define USBD_VID 0x1209 //MUST BE CHANGED.
+#define USBD_LANGID_STRING 1041
+#define USBD_MANUFACTURER_STRING "Otter Scientific"
+#define USBD_PID_FS 0x0001 //MUST BE CHANGED.
+#define USBD_PRODUCT_STRING_FS "HID Dials"
+#define USBD_SERIALNUMBER_STRING_FS "00000000001A"
+#define USBD_CONFIGURATION_STRING_FS "HID Config"
+#define USBD_INTERFACE_STRING_FS "HID Interface"
+
+
+
+/* USER CODE BEGIN PRIVATE_DEFINES */
+
+/* USER CODE END PRIVATE_DEFINES */
+
+/**
+ * @}
+ */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/** @defgroup USBD_DESC_Private_Macros USBD_DESC_Private_Macros
+ * @brief Private macros.
+ * @{
+ */
+
+/* USER CODE BEGIN PRIVATE_MACRO */
+
+/* USER CODE END PRIVATE_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
+ * @brief Private functions declaration.
+ * @{
+ */
+
+uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+
+#ifdef USB_SUPPORT_USER_STRING_DESC
+uint8_t * USBD_FS_USRStringDesc(USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length);
+#endif /* USB_SUPPORT_USER_STRING_DESC */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
+ * @brief Private variables.
+ * @{
+ */
+
+USBD_DescriptorsTypeDef FS_Desc =
+{
+ USBD_FS_DeviceDescriptor
+, USBD_FS_LangIDStrDescriptor
+, USBD_FS_ManufacturerStrDescriptor
+, USBD_FS_ProductStrDescriptor
+, USBD_FS_SerialStrDescriptor
+, USBD_FS_ConfigStrDescriptor
+, USBD_FS_InterfaceStrDescriptor
+};
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+/** USB standard device descriptor. */
+__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
+{
+ 0x12, /*bLength */
+ USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
+ 0x00, /*bcdUSB */
+ 0x02,
+ 0x02, /*bDeviceClass*/
+ 0x02, /*bDeviceSubClass*/
+ 0x00, /*bDeviceProtocol*/
+ USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
+ LOBYTE(USBD_VID), /*idVendor*/
+ HIBYTE(USBD_VID), /*idVendor*/
+ LOBYTE(USBD_PID_FS), /*idProduct*/
+ HIBYTE(USBD_PID_FS), /*idProduct*/
+ 0x00, /*bcdDevice rel. 2.00*/
+ 0x02,
+ USBD_IDX_MFC_STR, /*Index of manufacturer string*/
+ USBD_IDX_PRODUCT_STR, /*Index of product string*/
+ USBD_IDX_SERIAL_STR, /*Index of serial number string*/
+ USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/
+};
+
+/* USB_DeviceDescriptor */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
+ * @brief Private variables.
+ * @{
+ */
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+
+/** USB lang indentifier descriptor. */
+__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
+{
+ USB_LEN_LANGID_STR_DESC,
+ USB_DESC_TYPE_STRING,
+ LOBYTE(USBD_LANGID_STRING),
+ HIBYTE(USBD_LANGID_STRING)
+};
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+/* Internal string descriptor. */
+__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Functions USBD_DESC_Private_Functions
+ * @brief Private functions.
+ * @{
+ */
+
+/**
+ * @brief Return the device descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ *length = sizeof(USBD_FS_DeviceDesc);
+ return USBD_FS_DeviceDesc;
+}
+
+/**
+ * @brief Return the LangID string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ *length = sizeof(USBD_LangIDDesc);
+ return USBD_LangIDDesc;
+}
+
+/**
+ * @brief Return the product string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the manufacturer string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the serial number string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString((uint8_t *)USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the configuration string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the interface string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hid-dials/Src/usbd_hid.c b/hid-dials/Src/usbd_hid.c
new file mode 100644
index 0000000..f06d2db
--- /dev/null
+++ b/hid-dials/Src/usbd_hid.c
@@ -0,0 +1,615 @@
+/**
+ ******************************************************************************
+ * @file usbd_hid.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the HID core functions.
+ *
+ * @verbatim
+ *
+ * ===================================================================
+ * HID Class Description
+ * ===================================================================
+ * This module manages the HID class V1.11 following the "Device Class Definition
+ * for Human Interface Devices (HID) Version 1.11 Jun 27, 2001".
+ * This driver implements the following aspects of the specification:
+ * - The Boot Interface Subclass
+ * - The Mouse protocol
+ * - Usage Page : Generic Desktop
+ * - Usage : Joystick
+ * - Collection : Application
+ *
+ * @note In HS mode and when the DMA is used, all variables and data structures
+ * dealing with the DMA during the transaction process should be 32-bit aligned.
+ *
+ *
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_hid.h"
+#include "usbd_desc.h"
+#include "usbd_ctlreq.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_HID
+ * @brief usbd core module
+ * @{
+ */
+
+/** @defgroup USBD_HID_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_HID_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_HID_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+
+
+/** @defgroup USBD_HID_Private_FunctionPrototypes
+ * @{
+ */
+
+
+static uint8_t USBD_HID_Init (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx);
+
+static uint8_t USBD_HID_DeInit (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx);
+
+static uint8_t USBD_HID_Setup (USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t *USBD_HID_GetCfgDesc (uint16_t *length);
+
+static uint8_t *USBD_HID_GetDeviceQualifierDesc (uint16_t *length);
+
+static uint8_t USBD_HID_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum);
+
+
+static uint8_t USBD_HID_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum);
+/**
+ * @}
+ */
+
+/** @defgroup USBD_HID_Private_Variables
+ * @{
+ */
+
+USBD_ClassTypeDef USBD_HID =
+{
+ USBD_HID_Init,
+ USBD_HID_DeInit,
+ USBD_HID_Setup,
+ NULL, /*EP0_TxSent*/
+ NULL, /*EP0_RxReady*/
+ USBD_HID_DataIn, /*DataIn*/
+ USBD_HID_DataOut, /*DataOut*/
+ NULL, /*SOF */
+ NULL,
+ NULL,
+ USBD_HID_GetCfgDesc,
+ USBD_HID_GetCfgDesc,
+ USBD_HID_GetCfgDesc,
+ USBD_HID_GetDeviceQualifierDesc,
+};
+
+/* USB HID device Configuration Descriptor */
+__ALIGN_BEGIN static uint8_t USBD_HID_CfgDesc[USB_HID_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ 0x09, /* bLength: Configuration Descriptor size */
+ USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
+ USB_HID_CONFIG_DESC_SIZ,
+ /* wTotalLength: Bytes returned */
+ 0x00,
+ 0x01, /*bNumInterfaces: 1 interface*/
+ 0x01, /*bConfigurationValue: Configuration value*/
+ 0x00, /*iConfiguration: Index of string descriptor describing
+ the configuration*/
+ 0xE0, /*bmAttributes: bus powered and Support Remote Wake-up */
+ 0x32, /*MaxPower 100 mA: this current is used for detecting Vbus*/
+
+ /************** Descriptor of Joystick Mouse interface ****************/
+ /* 09 */
+ 0x09, /*bLength: Interface Descriptor size*/
+ USB_DESC_TYPE_INTERFACE,/*bDescriptorType: Interface descriptor type*/
+ 0x00, /*bInterfaceNumber: Number of Interface*/
+ 0x00, /*bAlternateSetting: Alternate setting*/
+ HID_NUM_EP,
+
+ 0x03, /*bInterfaceClass: HID*/
+
+ 0x01, /*bInterfaceSubClass : 1=BOOT, 0=no boot*/
+ 0x01, /*nInterfaceProtocol : 0=none, 1=keyboard, 2=mouse*/
+ 0, /*iInterface: Index of string descriptor*/
+ /******************** Descriptor of Joystick Mouse HID ********************/
+ /* 18 */
+ 0x09, /*bLength: HID Descriptor size*/
+ HID_DESCRIPTOR_TYPE, /*bDescriptorType: HID*/
+ 0x11, /*bcdHID: HID Class Spec release number*/
+ 0x01,
+ 0x00, /*bCountryCode: Hardware target country*/
+ 0x01, /*bNumDescriptors: Number of HID class descriptors to follow*/
+ 0x22, /*bDescriptorType*/
+ HID_REPORT_DESC_SIZE,/*wItemLength: Total length of Report descriptor*/
+ 0x00,
+ /******************** Descriptor of Mouse endpoint ********************/
+ /* 27 */
+ 0x07, /*bLength: Endpoint Descriptor size*/
+ USB_DESC_TYPE_ENDPOINT, /*bDescriptorType:*/
+
+ HID_EPIN_ADDR, /*bEndpointAddress: Endpoint Address (IN)*/
+ 0x03, /*bmAttributes: Interrupt endpoint*/
+ HID_EPIN_SIZE, /*wMaxPacketSize: 4 Byte max */
+ 0x00,
+ HID_FS_BINTERVAL, /*bInterval: Polling Interval (10 ms)*/
+ /* 34 */
+#if HID_LED_SUPPORT
+ 0x07, /*bLength: Endpoint Descriptor size*/
+ USB_DESC_TYPE_ENDPOINT, /*bDescriptorType:*/
+
+ HID_EPOUT_ADDR, /*bEndpointAddress: Endpoint Address (IN)*/
+ 0x03, /*bmAttributes: Interrupt endpoint*/
+ HID_EPOUT_SIZE, /*wMaxPacketSize: 4 Byte max */
+ 0x00,
+ HID_FS_BINTERVAL, /*bInterval: Polling Interval (10 ms)*/
+#endif
+ /* 41 */
+
+} ;
+
+/* USB HID device Configuration Descriptor */
+__ALIGN_BEGIN static uint8_t USBD_HID_Desc[USB_HID_DESC_SIZ] __ALIGN_END =
+{
+ /* 18 */
+ 0x09, /*bLength: HID Descriptor size*/
+ HID_DESCRIPTOR_TYPE, /*bDescriptorType: HID*/
+ 0x11, /*bcdHID: HID Class Spec release number*/
+ 0x01,
+ 0x00, /*bCountryCode: Hardware target country*/
+ 0x01, /*bNumDescriptors: Number of HID class descriptors to follow*/
+ 0x22, /*bDescriptorType*/
+ HID_REPORT_DESC_SIZE,/*wItemLength: Total length of Report descriptor*/
+ 0x00,
+};
+
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN static uint8_t USBD_HID_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
+{
+ USB_LEN_DEV_QUALIFIER_DESC,
+ USB_DESC_TYPE_DEVICE_QUALIFIER,
+ 0x00,
+ 0x02,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x40,
+ 0x01,
+ 0x00,
+};
+
+__ALIGN_BEGIN static uint8_t HID_ReportDesc[HID_REPORT_DESC_SIZE] __ALIGN_END =
+{
+ //copy from arduino code https://github.com/arduino-libraries/Keyboard/blob/master/src/Keyboard.cpp
+
+ 0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
+ 0x09, 0x06, // Usage (Keyboard)
+ 0xA1, 0x01, // Collection (Application)
+
+ 0x85, 0x01, // Report ID (1)
+
+ 0x05, 0x07, // Usage Page (Kbrd/Keypad)
+ 0x19, 0xE0, // Usage Minimum (0xE0)
+ 0x29, 0xE7, // Usage Maximum (0xE7)
+
+ // it seam we missed the shit ctrl etc .. here
+ 0x15, 0x00, // Logical Minimum (0)
+ 0x25, 0x01, // Logical Maximum (1)
+ 0x75, 0x01, // Report Size (1)
+ 0x95, 0x08, // Report Count (8)
+ 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
+ 0x95, 0x01, // Report Count (1)
+ 0x75, 0x08, // Report Size (8)
+ 0x81, 0x03, // Input (Const,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
+#if HID_LED_SUPPORT
+ // --------------------- output report for LED
+ 0x95, 0x05, // REPORT_COUNT (5)
+ 0x75, 0x01, // REPORT_SIZE (1)
+ 0x05, 0x08, // USAGE_PAGE (LEDs)
+ 0x19, 0x01, // USAGE_MINIMUM (Num Lock)
+ 0x29, 0x05, // USAGE_MAXIMUM (Kana)
+ 0x91, 0x02, // OUTPUT (Data,Var,Abs)
+ 0x95, 0x01, // REPORT_COUNT (1)
+ 0x75, 0x03, // REPORT_SIZE (3)
+ 0x91, 0x03, // OUTPUT (Cnst,Var,Abs)
+#endif
+ 0x95, 0x06, // Report Count (6)
+ 0x75, 0x08, // Report Size (8)
+ 0x15, 0x00, // Logical Minimum (0)
+ 0x25, 0x65, // Logical Maximum (101)
+ 0x05, 0x07, // Usage Page (Kbrd/Keypad)
+ 0x19, 0x00, // Usage Minimum (0x00)
+ 0x29, 0x65, // Usage Maximum (0x65)
+ 0x81, 0x00, // Input (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
+ 0xC0, // End Collection
+
+ // 47 bytes
+#if HID_MEDIA_REPORT
+ //help from http://www.microchip.com/forums/m618147.aspx
+ // this way of describing and sending media control is convenient
+ // short descriptor that permit all kidn meda by sending "usage" code
+ // see usb hid spec for full list
+ // it is possible to define one media key per bit it requires more space
+ // for descripotor and report ending is tighlyu couple to decriptor
+ // so it is not as convenient
+ // one such working code can be find here https://github.com/markwj/hidmedia/blob/master/hidmedia.X/usb_descriptors.c
+ //
+
+ 0x05, 0x0C, // Usage Page (Consumer)
+ 0x09, 0x01, // Usage (Consumer Control)
+ 0xA1, 0x01, // Collection (Application)
+ 0x85, HID_MEDIA_REPORT, // Report ID (VOLUME_REPORT )
+ 0x19, 0x00, // Usage Minimum (Unassigned)
+ 0x2A, 0x3C, 0x02, // Usage Maximum (AC Format)
+ 0x15, 0x00, // Logical Minimum (0)
+ 0x26, 0x3C, 0x02, // Logical Maximum (572)
+ 0x95, 0x01, // Report Count (1)
+ 0x75, 0x10, // Report Size (16)
+ 0x81, 0x00, // Input (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
+ 0xC0, // End Collection
+
+ // how to format the 3 byte report
+ // byte 0 report ID = 0x02 (VOLUME_REPORT)
+ // byte 1 media code for ex VOL_UP 0xE9 , VOL_DONW 0xEA ... etc
+ // byte 2 0x00
+ // a second report with 0 code shal be send to avoid "key repaeat"
+
+ // 25 bytes
+#endif
+};
+
+uint32_t nOutData;
+uint8_t OutDataBuffer[HID_EPOUT_SIZE]; // local copy for user (usb fly at same time)
+uint8_t OutData[HID_EPOUT_SIZE]; // live usb buffer
+
+#ifdef DEBUG
+
+uint8_t OutDataLog[8*HID_EPOUT_SIZE];
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup USBD_HID_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief USBD_HID_Init
+ * Initialize the HID interface
+ * @param pdev: device instance
+ * @param cfgidx: Configuration index
+ * @retval status
+ */
+static uint8_t USBD_HID_Init (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx)
+{
+ uint8_t ret = 0;
+
+ /* Open EP IN */
+ USBD_LL_OpenEP(pdev,
+ HID_EPIN_ADDR,
+ USBD_EP_TYPE_INTR,
+ HID_EPIN_SIZE);
+#if HID_LED_SUPPORT
+ USBD_LL_OpenEP(pdev,
+ HID_EPOUT_ADDR,
+ USBD_EP_TYPE_INTR,
+ HID_EPOUT_SIZE);
+#endif
+
+ pdev->pClassData = USBD_malloc(sizeof (USBD_HID_HandleTypeDef));
+
+ if(pdev->pClassData == NULL)
+ {
+ ret = 1;
+ }
+ else
+ {
+#if HID_LED_SUPPORT
+ USBD_LL_PrepareReceive(pdev, HID_EPOUT_ADDR, OutData, HID_EPOUT_SIZE);
+#endif
+ ((USBD_HID_HandleTypeDef *)pdev->pClassData)->state = HID_IDLE;
+
+ }
+ return ret;
+}
+
+/**
+ * @brief USBD_HID_Init
+ * DeInitialize the HID layer
+ * @param pdev: device instance
+ * @param cfgidx: Configuration index
+ * @retval status
+ */
+static uint8_t USBD_HID_DeInit (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx)
+{
+ /* Close HID EPs */
+ USBD_LL_CloseEP(pdev,
+ HID_EPIN_ADDR);
+
+ USBD_LL_CloseEP(pdev,
+ HID_EPOUT_ADDR);
+
+ /* FRee allocated memory */
+ if(pdev->pClassData != NULL)
+ {
+ USBD_free(pdev->pClassData);
+ pdev->pClassData = NULL;
+ }
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_HID_Setup
+ * Handle the HID specific requests
+ * @param pdev: instance
+ * @param req: usb requests
+ * @retval status
+ */
+static uint8_t USBD_HID_Setup (USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ uint16_t len = 0;
+ uint8_t *pbuf = NULL;
+ USBD_HID_HandleTypeDef *hhid = (USBD_HID_HandleTypeDef*) pdev->pClassData;
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+ case USB_REQ_TYPE_CLASS :
+ switch (req->bRequest)
+ {
+
+
+ case HID_REQ_SET_PROTOCOL:
+ hhid->Protocol = (uint8_t)(req->wValue);
+ break;
+
+ case HID_REQ_GET_PROTOCOL:
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&hhid->Protocol,
+ 1);
+ break;
+
+ case HID_REQ_SET_IDLE:
+ hhid->IdleState = (uint8_t)(req->wValue >> 8);
+ break;
+
+ case HID_REQ_GET_IDLE:
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&hhid->IdleState,
+ 1);
+ break;
+
+ default:
+ USBD_CtlError (pdev, req);
+ return USBD_FAIL;
+ }
+ break;
+
+ case USB_REQ_TYPE_STANDARD:
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_DESCRIPTOR:
+ if( req->wValue >> 8 == HID_REPORT_DESC)
+ {
+ len = MIN(HID_REPORT_DESC_SIZE , req->wLength);
+ pbuf = HID_ReportDesc;
+ }
+ else if( req->wValue >> 8 == HID_DESCRIPTOR_TYPE)
+ {
+ pbuf = USBD_HID_Desc;
+ len = MIN(USB_HID_DESC_SIZ , req->wLength);
+ }
+
+ USBD_CtlSendData (pdev,
+ pbuf,
+ len);
+
+ break;
+
+ case USB_REQ_GET_INTERFACE :
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&hhid->AltSetting,
+ 1);
+ break;
+
+ case USB_REQ_SET_INTERFACE :
+ hhid->AltSetting = (uint8_t)(req->wValue);
+ break;
+ }
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_HID_SendReport
+ * Send HID Report
+ * @param pdev: device instance
+ * @param buff: pointer to report
+ * @retval status
+ */
+uint8_t USBD_HID_SendReport (USBD_HandleTypeDef *pdev,
+ uint8_t *report,
+ uint16_t len)
+{
+ USBD_HID_HandleTypeDef *hhid = (USBD_HID_HandleTypeDef*)pdev->pClassData;
+
+ if (pdev->dev_state == USBD_STATE_CONFIGURED )
+ {
+ if(hhid->state == HID_IDLE)
+ {
+ hhid->state = HID_BUSY;
+ USBD_LL_Transmit (pdev,
+ HID_EPIN_ADDR,
+ report,
+ len);
+ }
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_HID_GetPollingInterval
+ * return polling interval from endpoint descriptor
+ * @param pdev: device instance
+ * @retval polling interval
+ */
+uint32_t USBD_HID_GetPollingInterval (USBD_HandleTypeDef *pdev)
+{
+ uint32_t polling_interval = 0;
+
+ /* HIGH-speed endpoints */
+ if(pdev->dev_speed == USBD_SPEED_HIGH)
+ {
+ /* Sets the data transfer polling interval for high speed transfers.
+ Values between 1..16 are allowed. Values correspond to interval
+ of 2 ^ (bInterval-1). This option (8 ms, corresponds to HID_HS_BINTERVAL */
+ polling_interval = (((1 <<(HID_HS_BINTERVAL - 1)))/8);
+ }
+ else /* LOW and FULL-speed endpoints */
+ {
+ /* Sets the data transfer polling interval for low and full
+ speed transfers */
+ polling_interval = HID_FS_BINTERVAL;
+ }
+
+ return ((uint32_t)(polling_interval));
+}
+
+/**
+ * @brief USBD_HID_GetCfgDesc
+ * return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_HID_GetCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_HID_CfgDesc);
+ return USBD_HID_CfgDesc;
+}
+
+
+/**
+ * @brief USBD_HID_DataIn
+ * handle data IN Stage
+ * @param pdev: device instance
+ * @param epnum: endpoint index
+ * @retval status
+ */
+static uint8_t USBD_HID_DataIn (USBD_HandleTypeDef *pdev,
+ uint8_t epnum)
+{
+
+ /* Ensure that the FIFO is empty before a new transfer, this condition could
+ be caused by a new transfer before the end of the previous transfer */
+ ((USBD_HID_HandleTypeDef *)pdev->pClassData)->state = HID_IDLE;
+ return USBD_OK;
+}
+
+
+__weak void USBD_HID_GetReport(uint8_t * OutData, int len){
+ /** default do ntohing */
+}
+
+static uint8_t USBD_HID_DataOut (USBD_HandleTypeDef *pdev,
+ uint8_t epnum)
+{
+ int len;
+
+#ifdef DEBUG
+ memcpy(OutDataLog+((nOutData)%8)*8,OutData,8);
+#endif
+ nOutData++;
+ // data cpy so we can be ready for next usb out and used received data safely
+ len = USBD_LL_GetRxDataSize (pdev, epnum);
+ memcpy(OutDataBuffer,OutData, len);
+ USBD_LL_PrepareReceive(pdev, HID_EPOUT_ADDR, OutData, HID_EPOUT_SIZE);
+ USBD_HID_GetReport(OutDataBuffer, len);
+ return USBD_OK;
+}
+
+
+/**
+* @brief DeviceQualifierDescriptor
+* return Device Qualifier descriptor
+* @param length : pointer data length
+* @retval pointer to descriptor buffer
+*/
+static uint8_t *USBD_HID_GetDeviceQualifierDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_HID_DeviceQualifierDesc);
+ return USBD_HID_DeviceQualifierDesc;
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit (git 2.34.1) at 2024-11-28 19:34:50 +0000