From 1b7ae0aeefb4ccb2913c3bd8a2f5ac1c84b0a75d Mon Sep 17 00:00:00 2001 From: jaseg Date: Fri, 13 Mar 2020 18:19:02 +0100 Subject: having problems with dma m2m mode --- controller/fw/src/adc.c | 19 +++++++++++-------- controller/fw/src/main.c | 9 ++++++++- 2 files changed, 19 insertions(+), 9 deletions(-) (limited to 'controller/fw/src') diff --git a/controller/fw/src/adc.c b/controller/fw/src/adc.c index 4801525..fba2420 100644 --- a/controller/fw/src/adc.c +++ b/controller/fw/src/adc.c @@ -37,29 +37,30 @@ void adc_init() { while (adc_stream->CR & DMA_SxCR_EN) ; /* wait for stream to become available */ adc_stream->NDTR = FMEAS_FFT_LEN/2; - adc_stream->PAR = ADC1->DR; + adc_stream->PAR = &(ADC1->DR); adc_stream->M0AR = (uint32_t) (adc_fft_buf[0] + FMEAS_FFT_LEN/2); adc_stream->M1AR = (uint32_t) (adc_fft_buf[1] + FMEAS_FFT_LEN/2); adc_stream->CR = (dma_adc_channel<CR |= DMA_SxCR_EN; NVIC_EnableIRQ(DMA2_Stream0_IRQn); NVIC_SetPriority(DMA2_Stream0_IRQn, 128); ADC1->CR1 = (0<CR2 = ADC_CR2_EXTEN | (0<CR2 = (1<SQR3 = (adc_channel<SQR1 = (0<CR2 = (2<CR1 = TIM_CR1_CEN; TIM1->CCMR1 = (6<CCER = TIM_CCER_CC1E; TIM1->PSC = 84-1; /* 1us ticks @ f_APB2=84MHz */ TIM1->ARR = 1000-1; /* 1ms period */ - TIM1->CCR1 = 1; + TIM1->CCR1 = 500-1; + TIM1->BDTR = TIM_BDTR_MOE; + TIM1->CR1 = TIM_CR1_CEN; TIM1->EGR = TIM_EGR_UG; } @@ -75,14 +76,16 @@ void DMA2_Stream0_IRQHandler(void) { if (mem_stream->CR & DMA_SxCR_EN) panic(); /* We should be long done by now. */ + adc_dma->LIFCR = 0x3d<NDTR = FMEAS_FFT_LEN/2; int ct = !!(adc_stream->CR & DMA_SxCR_CT); /* back half of old buffer (that was just written) */ - mem_stream->PAR = (uint32_t)(adc_fft_buf[!ct]); + mem_stream->PAR = (uint32_t)(adc_fft_buf[!ct] + FMEAS_FFT_LEN/2); /* front half of current buffer (whose back half is being written now) */ mem_stream->M0AR = (uint32_t) (adc_fft_buf[ct] + 0); + mem_stream->CR = (1<CR |= DMA_SxCR_EN; /* Kickoff FFT */ diff --git a/controller/fw/src/main.c b/controller/fw/src/main.c index 58977f7..4f2d67b 100644 --- a/controller/fw/src/main.c +++ b/controller/fw/src/main.c @@ -96,6 +96,8 @@ static void spi_flash_if_set_cs(bool val) { static void spi_flash_setup(void) { + RCC->AHB1ENR |= RCC_AHB1ENR_GPIOBEN; + GPIOB->MODER &= ~GPIO_MODER_MODER3_Msk & ~GPIO_MODER_MODER4_Msk & ~GPIO_MODER_MODER5_Msk & ~GPIO_MODER_MODER0_Msk; GPIOB->MODER |= (2<APB2ENR |= RCC_APB2ENR_SPI1EN; RCC->APB2RSTR |= RCC_APB2RSTR_SPI1RST; - RCC->APB2RSTR &= RCC_APB2RSTR_SPI1RST; + RCC->APB2RSTR &= ~RCC_APB2RSTR_SPI1RST; spif_init(&spif, 256, SPI1, &spi_flash_if_set_cs); } @@ -142,6 +144,7 @@ void spi_flash_test(void) { static unsigned int measurement_errors = 0; static struct dsss_demod_state demod_state; static uint32_t freq_sample_ts = 0; +static uint32_t debug_last_freq = 0; int main(void) { @@ -152,14 +155,18 @@ int main(void) while (23) { if (adc_fft_buf_ready_idx != -1) { + /* float out; if (adc_buf_measure_freq(adc_fft_buf[adc_fft_buf_ready_idx], &out)) { measurement_errors++; continue; } + debug_last_freq = out; + dsss_demod_init(&demod_state); dsss_demod_step(&demod_state, out, freq_sample_ts); + */ freq_sample_ts++; /* TODO: also increase in case of freq measurement error? */ adc_fft_buf_ready_idx = -1; -- cgit