serial if seems to work

3 files changed, 80 insertions, 82 deletions

diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..c2fc970
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,16 @@
+.ipynb_checkpoints
+Netzfrequenz_Sekundenwerte_2012_KW37.csv
+__pycache__
+gm_platform/platform/gerber.out
+gm_platform/platform/gerber
+*.kicad_pcb-bak
+*.sch-bak
+*.aux
+*.bbl
+*.bcf
+*.blg
+*.log
+*.out
+*.run.xml
+*.toc
+*.bib~
diff --git a/gm_platform/fw/serial.c b/gm_platform/fw/serial.c
index 5a6009c..25b86fc 100644
--- a/gm_platform/fw/serial.c
+++ b/gm_platform/fw/serial.c
@@ -43,18 +43,23 @@ static void usart_schedule_dma(void);
 static int usart_putc_nonblocking(uint8_t c);

 

 

-void usart_dma_init() {

+void usart_dma_reset() {

     usart_tx_buf.xfr_start = -1;

     usart_tx_buf.xfr_end = 0;

     usart_tx_buf.wr_pos = 0;

     usart_tx_buf.wr_idx = 0;

-    usart_tx_buf.cur_packet = -1;

-    usart_tx_buf.retransmit_rq = 0;

-    usart_tx_buf.wraparound = 0;

+    usart_tx_buf.xfr_next = 0;

+    usart_tx_buf.wraparound = false;

+    usart_tx_buf.ack = false;

+

     for (size_t i=0; i<ARRAY_LEN(usart_tx_buf.packet_end); i++)

         usart_tx_buf.packet_end[i] = -1;

 

     cobs_decode_incremental_initialize(&cobs_state);

+}

+

+void usart_dma_init() {

+    usart_dma_reset();

 

     /* Configure DMA 1 Channel 2 to handle uart transmission */

     DMA1_Channel2->CPAR = (uint32_t)&(USART1->TDR);

@@ -74,7 +79,7 @@ void usart_dma_init() {
 

     /* triggered on transfer completion. We use this to process the ADC data */

     NVIC_EnableIRQ(DMA1_Channel2_3_IRQn);

-    NVIC_SetPriority(DMA1_Channel2_3_IRQn, 1<<5);

+    NVIC_SetPriority(DMA1_Channel2_3_IRQn, 2<<5);

 

     USART1->CR1 = /* 8-bit -> M1, M0 clear */

         /* OVER8 clear. Use default 16x oversampling */

@@ -100,7 +105,7 @@ void usart_dma_init() {
 

     /* Enable receive interrupt */

     NVIC_EnableIRQ(USART1_IRQn);

-    NVIC_SetPriority(USART1_IRQn, 3<<5);

+    NVIC_SetPriority(USART1_IRQn, 1<<5);

 

     /* And... go! */

     USART1->CR1 |= USART_CR1_UE;

@@ -137,17 +142,11 @@ void USART1_IRQHandler() {
 

         switch (pkt->type) {

             case CTRL_PKT_RESET:

-                for (size_t i=0; i<ARRAY_LEN(usart_tx_buf.packet_end); i++)

-                    usart_tx_buf.packet_end[i] = -1;

+                usart_dma_reset();

                 break;

 

             case CTRL_PKT_ACK:

-                if (usart_ack_packet(pkt->orig_id))

-                    rx_protocol_errors++;

-                break;

-

-            case CTRL_PKT_RETRANSMIT:

-                usart_tx_buf.retransmit_rq = 1;

+                usart_tx_buf.ack = true;

                 if (!(DMA1_Channel2->CCR & DMA_CCR_EN))

                     usart_schedule_dma();

                 break;

@@ -161,98 +160,81 @@ void USART1_IRQHandler() {
 

 

 void usart_schedule_dma() {

-    /* This function is only called when the DMA channel is disabled. This means we don't have to guard it in IRQ

-     * disables. */

     volatile struct dma_tx_buf *buf = &usart_tx_buf;

 

-    ssize_t next_start, next_idx;

+    ssize_t xfr_start, xfr_end, xfr_len;

     if (buf->wraparound) {

-        buf->wraparound = 0;

-        next_idx = buf->cur_packet;

-        next_start = 0;

+        buf->wraparound = false;

+        xfr_start = 0;

+        xfr_len = buf->xfr_end;

+        xfr_end = buf->xfr_end;

 

-    } else if (buf->retransmit_rq) {

-        buf->retransmit_rq = 0;

-        next_idx = buf->cur_packet;

-        next_start = buf->xfr_start;

+    } else if (buf->ack) {

+        if (buf->packet_end[buf->xfr_next] == -1)

+            return; /* Nothing to trasnmit */

 

-    } else {

-        next_idx = (buf->cur_packet + 1) % ARRAY_LEN(usart_tx_buf.packet_end);

-        next_start = buf->xfr_end;

-    }

+        buf->ack = false;

 

-    ssize_t next_end = buf->packet_end[next_idx];

+        xfr_start = buf->xfr_end;

+        xfr_end = buf->packet_end[buf->xfr_next];

+        buf->packet_end[buf->xfr_next] = -1;

+        buf->xfr_next = (buf->xfr_next + 1) % ARRAY_LEN(buf->packet_end);

 

-    /* Nothing to trasnmit */

-    if (next_end == -1)

-        return;

+        if (xfr_end > xfr_start) { /* no wraparound */

+            xfr_len = xfr_end - xfr_start;

 

-    ssize_t xfr_len;

-    if (next_end > next_start) /* no wraparound */

-        xfr_len = next_end - next_start;

-    else /* wraparound */

-        xfr_len = sizeof(buf->data) - next_start; /* schedule transfer until end of buffer */

+        } else { /* wraparound */

+            if (xfr_end != 0)

+                buf->wraparound = true;

+            xfr_len = sizeof(buf->data) - xfr_start;

+        }

 

-    buf->xfr_start = next_start;

-    buf->xfr_end = (next_start + xfr_len) % sizeof(buf->data); /* handle wraparound */

-    buf->cur_packet = next_idx;

+    } else {

+        /* retransmit */

+        /* First, send a zero to delimit any garbage from the following good packet */

+        USART1->TDR = 0x00;

 

-    /* initiate transmission of new buffer */

-    DMA1_Channel2->CMAR = (uint32_t)(buf->data + next_start);

-    DMA1_Channel2->CNDTR = xfr_len;

-    DMA1_Channel2->CCR |= DMA_CCR_EN;

-}

+        xfr_start = buf->xfr_start;

+        xfr_end = buf->xfr_end;

 

-int usart_ack_packet(uint8_t idx) {

-    if (idx > ARRAY_LEN(usart_tx_buf.packet_end))

-        return -EINVAL;

+        if (xfr_end > xfr_start) { /* no wraparound */

+            xfr_len = xfr_end - xfr_start;

 

-    if (idx != usart_tx_buf.cur_packet)

-        return -EINVAL;

+        } else { /* wraparound */

+            if (xfr_end != 0)

+                buf->wraparound = true;

+            xfr_len = sizeof(buf->data) - xfr_start;

+        }

 

-    usart_tx_buf.packet_end[idx] = -1;

+    }

 

-    /* If the DMA stream is idle right now, schedule the next transfer */

-    if (!(DMA1_Channel2->CCR & DMA_CCR_EN))

-        usart_schedule_dma();

-    return 0;

+    buf->xfr_start = xfr_start;

+    buf->xfr_end = xfr_end;

+

+    /* initiate transmission of new buffer */

+    DMA1_Channel2->CMAR = (uint32_t)(buf->data + xfr_start);

+    DMA1_Channel2->CNDTR = xfr_len;

+    DMA1_Channel2->CCR |= DMA_CCR_EN;

 }

 

-int usart_dma_fifo_push(volatile struct dma_tx_buf *buf, uint8_t c) {

-    /* This function must be guarded by IRQ disable since the IRQ may schedule a new transfer and charge pos/start. */

-    NVIC_DisableIRQ(DMA1_Channel2_3_IRQn);

+int usart_putc_nonblocking(uint8_t c) {

+    volatile struct dma_tx_buf *buf = &usart_tx_buf;

 

-    if (buf->wr_pos == buf->xfr_start) {

-        NVIC_EnableIRQ(DMA1_Channel2_3_IRQn);

+    if (buf->wr_pos == buf->xfr_start)

         return -EBUSY;

-    }

 

     buf->data[buf->wr_pos] = c;

     buf->wr_pos = (buf->wr_pos + 1) % sizeof(buf->data);

-

-    NVIC_EnableIRQ(DMA1_Channel2_3_IRQn);

     return 0;

 }

 

-int usart_putc(uint8_t c) {

-    /* push char to fifo, busy-loop if stalled to wait for USART to empty fifo via DMA */

-    while (usart_dma_fifo_push(&usart_tx_buf, c) == -EBUSY) {

-        /* idle */

-    }

-    return 0;

-}

-

-int usart_putc_nonblocking(uint8_t c) {

-    return usart_dma_fifo_push(&usart_tx_buf, c);

-}

-

 

 void DMA1_Channel2_3_IRQHandler(void) {

     /* Transfer complete */

     DMA1->IFCR |= DMA_IFCR_CTCIF2;

 

     DMA1_Channel2->CCR &= ~DMA_CCR_EN;

-    if (usart_tx_buf.retransmit_rq || usart_tx_buf.wraparound)

+    if (usart_tx_buf.wraparound)

         usart_schedule_dma();

 }

 

@@ -266,7 +248,7 @@ int usart_send_packet_nonblocking(struct ll_pkt *pkt, size_t pkt_len) {
     }

 

     pkt->pid = usart_tx_buf.wr_idx;

-    pkt->_pad = 0;

+    pkt->_pad = usart_tx_buf.xfr_next;

 

     /* make the value this wonky-ass CRC implementation produces match zlib etc. */

     CRC->CR = CRC_CR_REV_OUT | (1<<CRC_CR_REV_IN_Pos) | CRC_CR_RESET;

diff --git a/gm_platform/fw/serial.h b/gm_platform/fw/serial.h
index 61ac4eb..8cec089 100644
--- a/gm_platform/fw/serial.h
+++ b/gm_platform/fw/serial.h
@@ -26,6 +26,7 @@
 #include <stdint.h>

 #include <stdarg.h>

 #include <errno.h>

+#include <stdbool.h>

 

 #include "global.h"

 

@@ -33,9 +34,10 @@ struct dma_tx_buf {
     /* The following fields are accessed only from DMA ISR */

     ssize_t xfr_start; /* Start index of running DMA transfer */

     ssize_t xfr_end; /* End index of running DMA transfer plus one */

-    ssize_t cur_packet;

-    int retransmit_rq;

-    int wraparound;

+    bool wraparound;

+    ssize_t xfr_next;

+    bool ack;

+

 

     /* The following fields are written only from non-interrupt code */

     ssize_t wr_pos; /* Next index to be written */

@@ -57,7 +59,6 @@ struct __attribute__((__packed__)) ll_pkt {
 enum ctrl_pkt_type {

     CTRL_PKT_RESET = 1,

     CTRL_PKT_ACK = 2,

-    CTRL_PKT_RETRANSMIT = 3,

 };

 

 struct __attribute__((__packed__)) ctrl_pkt {

@@ -68,7 +69,6 @@ struct __attribute__((__packed__)) ctrl_pkt {
 extern volatile struct dma_tx_buf usart_tx_buf;

 

 void usart_dma_init(void);

-int usart_dma_fifo_push(volatile struct dma_tx_buf *buf, uint8_t c);

 int usart_send_packet_nonblocking(struct ll_pkt *pkt, size_t pkt_len);

 int usart_ack_packet(uint8_t idx);