path: root/gerbonara/layers.py

#! /usr/bin/env python
# -*- coding: utf-8 -*-
#
# Copyright 2014 Hamilton Kibbe <ham@hamiltonkib.be>
# Copyright 2022 Jan Sebastian Götte <gerbonara@jaseg.de>
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

import os
import io
import sys
import re
import warnings
import copy
import bisect
import textwrap
import itertools
from collections import namedtuple
from pathlib import Path
from zipfile import ZipFile, is_zipfile
import tempfile

from .excellon import ExcellonFile, parse_allegro_ncparam, parse_allegro_logfile
from .rs274x import GerberFile
from .ipc356 import Netlist
from .cam import FileSettings, LazyCamFile
from .layer_rules import MATCH_RULES
from .utils import sum_bounds, setup_svg, MM, Tag, convex_hull
from . import graphic_objects as go
from . import graphic_primitives as gp


STANDARD_LAYERS = [
        'mechanical outline',
        'top copper',
        'top mask',
        'top silk',
        'top paste',
        'bottom copper',
        'bottom mask',
        'bottom silk',
        'bottom paste',
        ]

DEFAULT_COLORS = {
        'copper': '#cccccc',
        'mask': '#004200bf',
        'paste': '#999999',
        'silk': '#e0e0e0',
        'drill': '#303030',
        'outline': '#F0C000',
    }

class NamingScheme:
    kicad = {
    'top copper':           '{board_name}-F.Cu.gbr',
    'top mask':             '{board_name}-F.Mask.gbr',
    'top silk':             '{board_name}-F.SilkS.gbr',
    'top paste':            '{board_name}-F.Paste.gbr',
    'bottom copper':        '{board_name}-B.Cu.gbr',
    'bottom mask':          '{board_name}-B.Mask.gbr',
    'bottom silk':          '{board_name}-B.SilkS.gbr',
    'bottom paste':         '{board_name}-B.Paste.gbr',
    'inner copper':         '{board_name}-In{layer_number}.Cu.gbr',
    'mechanical outline':   '{board_name}-Edge.Cuts.gbr',
    'drill unknown':        '{board_name}.drl',
    'drill plated':         '{board_name}-PTH.drl',
    'drill nonplated':      '{board_name}-NPTH.drl',
    'other comments':       '{board_name}-Cmts.User.gbr',
    'other drawings':       '{board_name}-Dwgs.User.gbr',
    'top fabrication':      '{board_name}-F.Fab.gbr',
    'bottom fabrication':   '{board_name}-B.Fab.gbr',
    'top courtyard':        '{board_name}-F.CrtYd.gbr',
    'bottom courtyard':     '{board_name}-B.CrtYd.gbr',
    'other netlist':        '{board_name}.d356',
    }

    altium = {
    'top copper':           '{board_name}.gtl',
    'top mask':             '{board_name}.gts',
    'top silk':             '{board_name}.gto',
    'top paste':            '{board_name}.gtp',
    'bottom copper':        '{board_name}.gbl',
    'bottom mask':          '{board_name}.gbs',
    'bottom silk':          '{board_name}.gbo',
    'bottom paste':         '{board_name}.gbp',
    'inner copper':         '{board_name}.gp{layer_number}',
    'mechanical outline':   '{board_name}.gko',
    'drill unknown':        '{board_name}.drl',
    'drill plated':         '{board_name}.plated.drl',
    'drill nonplated':      '{board_name}.nonplated.drl',
    'other comments':       '{board_name}.gm2',
    'other drawings':       '{board_name}.gm3',
    'top courtyard':        '{board_name}.gm13',
    'bottom courtyard':     '{board_name}.gm14',
    'top fabrication':      '{board_name}.gm15',
    'bottom fabrication':   '{board_name}.gm16',
    }



def _match_files(filenames):
    matches = {}
    for generator, rules in MATCH_RULES.items():
        already_matched = set()
        gen = {}
        matches[generator] = gen
        for layer, regex in rules.items():
            for fn in filenames:
                if fn in already_matched:
                    continue

                if (m := re.fullmatch(regex, fn.name, re.IGNORECASE)):
                    if layer == 'inner copper':
                        target = 'inner_' + ''.join(e or '' for e in m.groups()) + ' copper'
                    else:
                        target = layer

                    gen[target] = gen.get(target, []) + [fn]
                    already_matched.add(fn)
    return matches


def _best_match(filenames):
    matches = _match_files(filenames)
    matches = sorted(matches.items(), key=lambda pair: len(pair[1]))
    generator, files = matches[-1]
    return generator, files


def identify_file(data):
    """ Identify file type from file contents. Returns either of the string constants :py:obj:`excellon`,
    :py:obj:`gerber`, or :py:obj:`ipc356`, or returns :py:obj:`None` if the file format is unclear.

    :param data: Contents of file as :py:obj:`str`
    :rtype: :py:obj:`str`
    """

    if 'M48' in data:
        return 'excellon'

    if 'G90' in data and ';LEADER:' in data: # yet another allegro special case
        return 'excellon'

    if 'FSLAX' in data or 'FSTAX' in data:
        return 'gerber'

    if 'UNITS CUST' in data:
        return 'ipc356'

    return None


def _common_prefix(l):
    out = []
    for cand in l:
        score = lambda n: sum(elem.startswith(cand[:n]) for elem in l)
        baseline = score(1)
        if len(l) - baseline > 5:
            continue
        for n in range(len(cand) if '.' not in cand else cand.index('.')+1, 2, -1):
            if len(l) - score(n) < 5:
                break
        out.append(cand[:n-1])
 
    if not out:
        return ''
 
    return sorted(out, key=len)[-1]

def _do_autoguess(filenames):
    prefix = _common_prefix([f.name for f in filenames])

    matches = {}
    for f in filenames:
        name = _layername_autoguesser(f.name[len(prefix):] if f.name.startswith(prefix) else f.name)
        if name != 'unknown unknown':
            matches[name] = matches.get(name, []) + [f]

    inner_layers = [ m for m in matches if 'inner' in m ]
    if len(inner_layers) >= 2 and 'copper top' not in matches and 'copper bottom' not in matches:
        if 'inner_01 copper' in matches:
            warnings.warn('Could not find copper layer. Re-assigning outermost inner layers to top/bottom copper.')
            matches['top copper'] = matches.pop('inner_01 copper')
            last_inner = sorted(inner_layers, key=lambda name: int(name.partition(' ')[0].partition('_')[2]))[-1]
            matches['bottom copper'] = matches.pop(last_inner)

    return matches


def _layername_autoguesser(fn):
    fn, _, ext = fn.lower().rpartition('.')
    
    if ext in ('log', 'err', 'fdl', 'py', 'sh', 'md', 'rst', 'zip', 'pdf', 'svg', 'ps', 'png', 'jpg', 'bmp'):
        return 'unknown unknown'

    side, use = 'unknown', 'unknown'
    if re.search('top|front|pri?m?(ary)?', fn):
        side = 'top'
        use = 'copper'

    if re.search('bot(tom)?|back|sec(ondary)?', fn):
        side = 'bottom'
        use = 'copper'

    if re.search('silks?(creen)?|symbol', fn):
        use = 'silk'

    elif re.search('(solder)?paste|metalmask', fn):
        use = 'paste'

    elif re.search('(solder)?(mask|resist)', fn):
        use = 'mask'

    elif re.search('drill|rout?e?', fn):
        side = 'drill'
        use = 'unknown'

        if re.search(r'np(th|lt)?|(non|un)\W*plated|(non|un)\Wgalv', fn):
            use = 'nonplated'

        elif re.search('pth|plated|galv|plt', fn):
            use = 'plated'

    elif (m := re.search(r'(la?y?e?r?|in(ner)?|conduct(or|ive)?)\W*(?P<num>[0-9]+)', fn)):
        use = 'copper'
        side = f'inner_{int(m["num"]):02d}'

    elif re.search('film', fn):
        use = 'copper'

    elif re.search('out(line)?', fn):
        use = 'outline'
        side = 'mechanical'

    elif 'ipc' in fn and '356' in fn:
        use = 'netlist'
        side = 'other'

    elif 'netlist' in fn:
        use = 'netlist'
        side = 'other'

    if side == 'unknown':
        if re.search(r'[^a-z0-9]a', fn):
            side = 'top'
        elif re.search(r'[^a-z0-9]b', fn):
            side = 'bottom'

    return f'{side} {use}'


def _sort_layername(val):
    (side, use), _layer = val
    if side == 'top':
        return -1
    if side == 'bottom':
        return 1e99
    assert side.startswith('inner_')
    return int(side[len('inner_'):])


class LayerStack:
    """ :py:class:`LayerStack` represents a set of Gerber files that describe different layers of the same board.

    :ivar graphic_layers: :py:obj:`dict` mapping :py:obj:`(side, use)` tuples to the Gerber layers of the board.
                          :py:obj:`side` can be one of :py:obj:`"top"`, :py:obj:`"bottom"`, :py:obj:`"mechanical"`, or a
                          numbered internal layer such as :py:obj:`"inner2"`. :py:obj:`use` can be one of
                          :py:obj:`"silk", :py:obj:`mask`, :py:obj:`paste` or :py:obj:`copper`. For internal layers,
                          only :py:obj:`copper` is valid.
    :ivar board_name: Name of this board as parse from the input filenames, as a :py:obj:`str`. You can overwrite this
                      attribute with a different name, which will then be used during saving with the built-in file
                      naming rules.
    :ivar netlist: The :py:class:`~.ipc356.Netlist` of this board, or :py:obj:`None`
    :ivar original_path: The path to the directory or zip file that this board was loaded from.
    :ivar was_zipped: True if this board was loaded from a zip file.
    :ivar generator: A string containing an educated guess on which EDA tool generated this file. Example:
                     :py:obj:`"altium"`
    """

    def __init__(self, graphic_layers=None, drill_pth=None, drill_npth=None, drill_layers=(), netlist=None, board_name=None, original_path=None, was_zipped=False, generator=None):
        if not drill_layers and (graphic_layers, drill_pth, drill_npth) == (None, None, None):
            graphic_layers = {tuple(layer.split()): GerberFile()
                    for layer in ('top paste', 'top silk', 'top mask', 'top copper',
                                  'bottom copper', 'bottom mask', 'bottom silk', 'bottom paste',
                                  'mechanical outline')}

            drill_pth = ExcellonFile()
            drill_npth = ExcellonFile()

        self.graphic_layers = graphic_layers
        self.drill_pth = drill_pth
        self.drill_npth = drill_npth
        self._drill_layers = list(drill_layers)
        self.drill_mixed = None
        self.board_name = board_name
        self.netlist = netlist
        self.original_path = original_path
        self.was_zipped = was_zipped
        self.generator = generator

    @classmethod
    def open(kls, path, board_name=None, lazy=False, overrides=None, autoguess=True):
        """ Load a board from the given path.

        * The path can be a single file, in which case a :py:class:`LayerStack` containing only that file on a custom
          layer is returned.
        * The path can point to a directory, in which case the content's of that directory are analyzed for their file
          type and function.
        * The path can point to a zip file, in which case that zip file's contents are analyzed for their file type and
          function.
        * Finally, the path can be the string :py:obj:`"-"`, in which case this function will attempt to read a zip file
          from standard input.

        :param path: Path to a gerber file, directory or zip file, or the string :py:obj:`"-"`
        :param board_name: Override board name for the returned :py:class:`LayerStack` instance instead of guessing the
                           board name from the found file names.
        :param lazy: Do not parse files right away, instead return a :py:class:`LayerStack` containing
                     :py:class:~.cam.LazyCamFile` instances.
        :param overrides: :py:obj:`dict` containing a filename regex to layer type mapping that will override
                          gerbonara's built-in automatic rules. Each key must be a :py:obj:`str` containing a regex, and
                          each value must be a :py:obj:`(side, use)` :py:obj:`tuple` of :py:obj:`str`.
        :param autoguess: :py:obj:`bool` to enable or disable gerbonara's built-in automatic filename-based layer
                          function guessing. When :py:obj:`False`, layer functions are deduced only from
                          :py:obj:`overrides`.
        :rtype: :py:class:`LayerStack`
        """
        if str(path) == '-':
            data_io = io.BytesIO(sys.stdin.buffer.read())
            return kls.from_zip_data(data_io, original_path='<stdin>', board_name=board_name, lazy=lazy)

        path = Path(path)
        if path.is_dir():
            return kls.open_dir(path, board_name=board_name, lazy=lazy, overrides=overrides, autoguess=autoguess)
        elif path.suffix.lower() == '.zip' or is_zipfile(path):
            return kls.open_zip(path, board_name=board_name, lazy=lazy, overrides=overrides, autoguess=autoguess)
        else:
            return kls.from_files([path], board_name=board_name, lazy=lazy, overrides=overrides, autoguess=False)

    @classmethod
    def open_zip(kls, file, original_path=None, board_name=None, lazy=False, overrides=None, autoguess=True):
        """ Load a board from a ZIP file. Refer to :py:meth:`~.layers.LayerStack.open` for the meaning of the other
        options. 

        :param file: file-like object
        :param original_path: Override the :py:obj:`original_path` of the resulting :py:class:`LayerStack` with the
                              given value.
        :rtype: :py:class:`LayerStack`
        """
        tmpdir = tempfile.TemporaryDirectory()
        tmp_indir = Path(tmpdir.name) / 'input'
        tmp_indir.mkdir()

        with ZipFile(file) as f:
            f.extractall(path=tmp_indir)

        inst = kls.open_dir(tmp_indir, board_name=board_name, lazy=lazy)
        inst.tmpdir = tmpdir
        inst.original_path = Path(original_path or file)
        inst.was_zipped = True
        return inst

    @classmethod
    def open_dir(kls, directory, board_name=None, lazy=False, overrides=None, autoguess=True):
        """ Load a board from a directory. Refer to :py:meth:`~.layers.LayerStack.open` for the meaning of the options. 

        :param directory: Path of the directory to process.
        :rtype: :py:class:`LayerStack`
        """

        directory = Path(directory)
        if not directory.is_dir():
            raise FileNotFoundError(f'{directory} is not a directory')

        files = [ path for path in directory.glob('**/*') if path.is_file() ]
        return kls.from_files(files, board_name=board_name, lazy=lazy, original_path=directory, overrides=overrides,
                              autoguess=autoguess)
        inst.original_path = directory
        return inst

    @classmethod
    def from_files(kls, files, board_name=None, lazy=False, original_path=None, was_zipped=False, overrides=None,
                   autoguess=True):
        """ Load a board from a directory. Refer to :py:meth:`~.layers.LayerStack.open` for the meaning of the options. 

        :param files: List of paths of the files to load.
        :param original_path: Override the :py:obj:`original_path` of the resulting :py:class:`LayerStack` with the
                              given value.
        :param was_zipped: Override the :py:obj:`was_zipped` attribute of the resulting :py:class:`LayerStack` with the
                           given value.
        :rtype: :py:class:`LayerStack`
        """

        if autoguess:
            generator, filemap = _best_match(files)
        else:
            generator = 'custom'
            if overrides:
                filemap = {}
            else:
                filemap = {'unknown unknown': files}
        all_generator_hints = set()

        if overrides:
            for fn in files:
                for expr, layer in overrides.items():
                    if re.fullmatch(expr, fn.name):
                        if layer == 'ignore':
                            for entries in filemap.values():
                                if fn in entries:
                                    entries.remove(fn)
                        else:
                            if layer in filemap and fn in filemap[layer]:
                                filemap[layer].remove(fn)
                            filemap[layer] = filemap.get(layer, []) + [fn]

        if sum(len(files) for files in filemap.values()) < 6 and autoguess:
            warnings.warn('Ambiguous gerber filenames. Trying last-resort autoguesser.')
            generator = None
            filemap = _do_autoguess(files)
            if len(filemap) < 6:
                raise ValueError('Cannot figure out gerber file mapping. Partial map is: ', filemap)

        excellon_settings, external_tools = None, None
        if generator == 'geda':
            # geda is written by geniuses who waste no bytes of unnecessary output so it doesn't actually include the
            # number format in files that use imperial units. Unfortunately it also doesn't include any hints that the
            # file was generated by geda, so we have to guess by context whether this is just geda being geda or
            # potential user error.
            excellon_settings = FileSettings(number_format=(2, 4))

        elif generator == 'allegro':
            # Allegro puts information that is absolutely vital for parsing its excellon files... into another file,
            # next to the actual excellon file. Despite pretty much everyone else having figured out a way to put that
            # info into the excellon file itself, even if only as a comment.
            if 'excellon params' in filemap:
                excellon_settings = parse_allegro_ncparam(filemap['excellon params'][0].read_text())
                for file in filemap['excellon params']:
                    if (external_tools := parse_allegro_logfile(file.read_text())):
                        break
                del filemap['excellon params']
            # Ignore if we can't find the param file -- maybe the user has convinced Allegro to actually put this
            # information into a comment, or maybe they have made Allegro just use decimal points like XNC does.

            filemap = _do_autoguess([ f for files in filemap.values() for f in files ])
            if len(filemap) < 6:
                raise SystemError('Cannot figure out gerber file mapping')
            # FIXME use layer metadata from comments and ipc file if available

        elif generator == 'zuken':
            filemap = _do_autoguess([ f for files in filemap.values() for f in files ])
            if len(filemap) < 6:
                raise SystemError('Cannot figure out gerber file mapping')
            # FIXME use layer metadata from comments and ipc file if available

        elif generator == 'altium':
            if 'mechanical outline' in filemap:
                # Use lowest-numbered mechanical layer as outline, ignore others.
                mechs = {}
                for layer in filemap['mechanical outline']:
                    if layer.name.lower().endswith('gko'):
                        filemap['mechanical outline'] = [layer]
                        break

                    if (m := re.match(r'.*\.gm([0-9]+)', layer.name, re.IGNORECASE)):
                        mechs[int(m[1])] = layer
                    else:
                        break
                else:
                    filemap['mechanical outline'] = [sorted(mechs.items(), key=lambda x: x[0])[0][1]]

        else:
            excellon_settings = None

        ambiguous = [ f'{key} ({", ".join(x.name for x in value)})' for key, value in filemap.items() if len(value) > 1 and not 'drill' in key ]
        if ambiguous:
            raise SystemError(f'Ambiguous layer names: {", ".join(ambiguous)}')

        drill_pth, drill_npth = None, None
        drill_layers = []
        netlist = None
        layers = {} # { tuple(key.split()): None for key in STANDARD_LAYERS }
        for key, paths in filemap.items():
            if len(paths) > 1 and not 'drill' in key:
                raise ValueError(f'Multiple matching files found for {key} layer: {", ".join(value)}')

            for path in paths:
                id_result = identify_file(path.read_text())

                if 'netlist' in key:
                    layer = LazyCamFile(Netlist, path)

                elif ('outline' in key or 'drill' in key) and id_result != 'gerber':
                    if id_result is None:
                        # Since e.g. altium uses ".txt" as the extension for its drill files, we have to assume the
                        # current file might not be a drill file after all.
                        continue

                    if 'nonplated' in key:
                        plated = False
                    elif 'plated' in key:
                        plated = True
                    else:
                        plated = None
                    layer = LazyCamFile(ExcellonFile, path, plated=plated, settings=excellon_settings, external_tools=external_tools)
                else:

                    layer = LazyCamFile(GerberFile, path)

                if not lazy:
                    layer = layer.instance

                if key == 'mechanical outline':
                    layers['mechanical', 'outline'] = layer

                elif 'drill' in key:
                    if 'nonplated' in key and drill_npth is None:
                        drill_npth = layer
                    elif 'plated' in key and drill_pth is None:
                        drill_pth = layer
                    else:
                        drill_layers.append(layer)

                elif 'netlist' in key:
                    if netlist:
                        warnings.warn(f'Found multiple netlist files, using only first one. Have: {netlist.original_path.name}, got {path.name}')
                    else:
                        netlist = layer

                else:
                    side, _, use = key.partition(' ')
                    layers[(side, use)] = layer

                if not lazy:
                    hints = set(layer.generator_hints) | { generator }
                    all_generator_hints |= hints
                    if len(hints) > 1:
                        warnings.warn('File identification returned ambiguous results. Please raise an issue on the '
                                'gerbonara tracker and if possible please provide these input files for reference.')

        if not board_name:
            board_name = _common_prefix([l.original_path.name for l in layers.values() if l is not None])
            board_name = re.sub(r'^\W+', '', board_name)
            board_name = re.sub(r'\W+$', '', board_name)

        return kls(layers, drill_pth, drill_npth, drill_layers, board_name=board_name,
                original_path=original_path, was_zipped=was_zipped, generator=[*all_generator_hints, None][0])

    def save_to_zipfile(self, path, prefix='', overwrite_existing=True, board_name=None, naming_scheme={},
                          gerber_settings=None, excellon_settings=None):
        """ Save this board into a zip file at the given path. For other options, see
        :py:meth:`~.layers.LayerStack.save_to_directory`.

        :param path: Path of output zip file
        :param overwrite_existing: Bool specifying whether override an existing zip file. If :py:obj:`False` and
                                   :py:obj:`path` exists, a :py:obj:`ValueError` is raised.
        :param board_name: Board name to use when naming the Gerber/Excellon files

        :param prefix: Store output files under the given prefix inside the zip file
        """
        if path.is_file():
            if overwrite_existing:
                path.unlink()
            else:
                raise ValueError('output zip file already exists and overwrite_existing is False')

        if gerber_settings and not excellon_settings:
            excellon_settings = gerber_settings

        with ZipFile(path, 'w') as le_zip:
            for path, layer in self._save_files_iter(board_name=board_name, naming_scheme=naming_scheme):
                with le_zip.open(prefix + str(path), 'w') as out:
                    out.write(layer.instance.write_to_bytes())

    def save_to_directory(self, path, naming_scheme={}, overwrite_existing=True, board_name=None,
                          gerber_settings=None, excellon_settings=None):
        """ Save this board into a directory at the given path. If the given path does not exist, a new directory is
        created in its place.

        :param path: Output directory
        :param naming_scheme: :py:obj:`dict` specifying the naming scheme to use for the individual layer files. When
                              not specified, the original filenames are kept where available, and a default naming
                              scheme is used. You can provide your own :py:obj:`dict` here, mapping :py:obj:`"side use"`
                              strings to filenames, or use one of :py:attr:`~.layers.NamingScheme.kicad` or
                              :py:attr:`~.layers.NamingScheme.kicad`.
        :param board_name: Board name to use when naming the Gerber/Excellon files
        :param overwrite_existing: Bool specifying whether override an existing directory. If :py:obj:`False` and
                                   :py:obj:`path` exists, a :py:obj:`ValueError` is raised. Note that a
                                   :py:obj:`ValueError` will still be raised if the target exists and is not a
                                   directory.
        :param gerber_settings: :py:class:`~.cam.FileSettings` to use for Gerber file export. When not given, the input
                                file's original settings are re-used if available. If those can't be found anymore, sane
                                defaults are used. We recommend you set this to the result of
                                :py:meth:`~.cam.FileSettings.defaults`.
        """
        outdir = Path(path)
        outdir.mkdir(parents=True, exist_ok=overwrite_existing)

        if gerber_settings and not excellon_settings:
            excellon_settings = gerber_settings

        for path, layer in self._save_files_iter(board_name=board_name, naming_scheme=naming_scheme):
            out = outdir / path
            if out.exists() and not overwrite_existing:
                raise SystemError(f'Path exists but overwrite_existing is False: {out}')
            layer.instance.save(out)

    def _save_files_iter(self, board_name=None, naming_scheme={}):
        board_name = board_name or self.board_name

        if board_name is None:
            import inspect
            frame = inspect.currentframe()
            if frame is None:
                board_name = 'board'
            else:
                while frame is not None:
                    import sys
                    if not frame.f_globals['__name__'].startswith('gerbonara'):
                        board_name = frame.f_code.co_name
                        del frame
                        break
                    old_frame, frame = frame, frame.f_back
                    del old_frame

        def get_name(layer_type, layer):
            nonlocal naming_scheme, board_name

            if (m := re.match('inner_([0-9]+) copper', layer_type)):
                layer_type = 'inner copper'
                num = int(m[1])
            else:
                num = None

            if layer_type in naming_scheme:
                path = naming_scheme[layer_type].format(layer_number=num, board_name=board_name)
            elif layer.original_path and layer.original_path.name:
                path = layer.original_path.name
            else:
                path = NamingScheme.kicad[layer_type].format(layer_number=num, board_name=board_name)
                #ext = 'drl' if isinstance(layer, ExcellonFile) else 'gbr'
                #path = f'{board_name}-{layer_type.replace(" ", "_")}.{ext}'

            return path

        for (side, use), layer in self.graphic_layers.items():
            yield get_name(f'{side} {use}', layer), layer

        #self.normalize_drill_layers()

        if self.drill_pth is not None:
            yield get_name('drill plated', self.drill_pth), self.drill_pth

        if self.drill_npth is not None:
            yield get_name('drill nonplated', self.drill_npth), self.drill_npth

        for layer in self._drill_layers:
            yield get_name('drill unknown', layer), layer

        if self.netlist:
            yield get_name('other netlist', self.netlist), self.netlist

    def __str__(self):
        names = [ f'{side} {use}' for side, use in self.graphic_layers ]
        num_drill_layers = len(list(self.drill_layers))
        return f'<LayerStack {self.board_name} [{", ".join(names)}] and {num_drill_layers} drill layers>'

    def __repr__(self):
        return str(self)

    def to_svg(self, margin=0, arg_unit=MM, svg_unit=MM, force_bounds=None, tag=Tag):
        """ Convert this layer stack to a plain SVG string. This is intended for use cases where the resulting SVG will
        be processed by other tools, and thus styling with colors or extra markup like Inkscape layer information are
        unwanted. If you want to instead generate a nice-looking preview image for display or graphical editing in tools
        such as Inkscape, use :py:meth:`~.layers.LayerStack.to_pretty_svg` instead.

        WARNING: The SVG files generated by this function preserve the Gerber coordinates 1:1, so the file will be
        mirrored vertically.

        :param margin: Export SVG file with given margin around the board's bounding box.
        :param arg_unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). Which unit ``margin`` and
                         ``force_bounds`` are specified in. Default: mm
        :param svg_unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). Which unit to use inside the SVG file.
                         Default: mm
        :param force_bounds: Use bounds given as :py:obj:`((min_x, min_y), (max_x, max_y))` tuple for the output SVG
                             file instead of deriving them from this board's bounding box and ``margin``. Note that this
                             will not scale or move the board, but instead will only crop the viewport.
        :param tag: Extension point to support alternative XML serializers in addition to the built-in one.
        :rtype: :py:obj:`str`
        """
        if force_bounds:
            bounds = svg_unit.convert_bounds_from(arg_unit, force_bounds)
        else:
            bounds = self.bounding_box(svg_unit, default=((0, 0), (0, 0)))
        
        tags = []
        for (side, use), layer in self.graphic_layers.items():
            tags.append(tag('g', list(layer.svg_objects(svg_unit=svg_unit, fg='black', bg="white", tag=Tag)),
                id=f'l-{side}-{use}'))

        for i, layer in enumerate(self.drill_layers):
            tags.append(tag('g', list(layer.svg_objects(svg_unit=svg_unit, fg='black', bg="white", tag=Tag)),
                id=f'l-drill-{i}'))

        return setup_svg(tags, bounds, margin=margin, arg_unit=arg_unit, svg_unit=svg_unit, tag=tag)

    def to_pretty_svg(self, side='top', margin=0, arg_unit=MM, svg_unit=MM, force_bounds=None, tag=Tag, inkscape=False,
                      colors=None):
        """ Convert this layer stack to a pretty SVG string that is suitable for display or for editing in tools such as
        Inkscape. If you want to process the resulting SVG in other tools, consider using
        :py:meth:`~layers.LayerStack.to_svg` instead, which produces output without color styling or blending based on
        SVG filter effects.

        :param side: One of the strings :py:obj:`"top"` or :py:obj:`"bottom"` specifying which side of the board to
                     render.
        :param margin: Export SVG file with given margin around the board's bounding box.
        :param arg_unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). Which unit ``margin`` and
                         ``force_bounds`` are specified in. Default: mm
        :param svg_unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). Which unit to use inside the SVG file.
                         Default: mm
        :param force_bounds: Use bounds given as :py:obj:`((min_x, min_y), (max_x, max_y))` tuple for the output SVG
                             file instead of deriving them from this board's bounding box and ``margin``. Note that this
                             will not scale or move the board, but instead will only crop the viewport.
        :param tag: Extension point to support alternative XML serializers in addition to the built-in one.
        :param inkscape: :py:obj:`bool` enabling Inkscape-specific markup such as Inkscape-native layers
        :param colors: Colorscheme to use, or :py:obj:`None` for the built-in pseudo-realistic green solder mask default
                       color scheme. When given, must be a dict mapping semantic :py:obj:`"side use"` layer names such
                       as :py:obj:`"top copper"` to a HTML-like hex color code such as :py:obj:`#ff00ea`. Transparency
                       is supported through 8-digit color codes. When 8 digits are given, the last two digits are used
                       as the layer's alpha channel. Valid side values in the layer name strings are :py:obj:`"top"`,
                       :py:obj:`"bottom"`, and :py:obj:`"mechanical"` as well as :py:obj:`"inner1"`, :py:obj:`"inner2"`
                       etc. for internal layers. Valid use values are :py:obj:`"mask"`, :py:obj:`"silk"`,
                       :py:obj:`"paste"`, and :py:obj:`"copper"`. For internal layers, only :py:obj:`"copper"` is valid.
        :rtype: :py:obj:`str`
        """
        if colors is None:
            colors = DEFAULT_COLORS

        colors_alpha = {}
        for layer, color in colors.items():
            if isinstance(color, str):
                if re.match(r'#[0-9a-fA-F]{8}', color):
                    colors_alpha[layer] = (color[:-2], int(color[-2:], 16)/255)
                else:
                    colors_alpha[layer] = (color, 1)
            else:
                colors_alpha[layer] = color

        if force_bounds:
            bounds = svg_unit.convert_bounds_from(arg_unit, force_bounds)
        else:
            bounds = self.board_bounds(unit=svg_unit, default=((0, 0), (0, 0)))
        
        filter_defs = []

        for layer, (color, alpha) in colors_alpha.items():
            filter_defs.append(textwrap.dedent(f'''
                <filter id="f-{layer}">
                <feFlood result="flood-black" flood-color="black" flood-opacity="1"/>
                <feFlood result="flood-green" flood-color="{color}"/>
                <feBlend in="SourceGraphic" in2="flood-black" result="overlay" mode="normal"/>
                <feBlend in="overlay" in2="flood-green" result="colored" mode="multiply"/>
                <feColorMatrix in="overlay" type="matrix" result="alphaOut" values="0 0 0 0 0
                0 0 0 0 0
                0 0 0 0 0
                {alpha} 0 0 0 0"/>
                <feComposite in="colored" in2="alphaOut" operator="in"/>
                </filter>'''.strip()))

        inkscape_attrs = lambda label: dict(inkscape__groupmode='layer', inkscape__label=label) if inkscape else {}
        
        layers = []
        for use in ['copper', 'mask', 'silk', 'paste']:
            if (side, use) not in self:
                warnings.warn(f'Layer "{side} {use}" not found. Found layers: {", ".join(side + " " + use for side, use in self.graphic_layers)}')
                continue

            layer = self[(side, use)]
            fg, bg = ('white', 'black') if use != 'mask' else ('black', 'white')
            objects = list(layer.instance.svg_objects(svg_unit=svg_unit, fg=fg, bg=bg, tag=Tag))
            if use == 'mask':
                objects.insert(0, tag('path', id='outline-path', d=self.outline_svg_d(unit=svg_unit), style='fill:white'))
            layers.append(tag('g', objects, id=f'l-{side}-{use}', filter=f'url(#f-{use})', **inkscape_attrs(f'{side} {use}')))

        for i, layer in enumerate(self.drill_layers):
            layers.append(tag('g', list(layer.instance.svg_objects(svg_unit=svg_unit, fg='white', bg='black', tag=Tag)),
                id=f'g-drill-{i}', filter=f'url(#f-drill)', **inkscape_attrs(f'drill-{i}')))

        if self.outline:
            layers.append(tag('g', list(self.outline.instance.svg_objects(svg_unit=svg_unit, fg='white', bg='black', tag=Tag)),
                id=f'g-outline-{i}', **inkscape_attrs(f'outline-{i}')))

        layer_group = tag('g', layers, transform=f'translate(0 {bounds[0][1] + bounds[1][1]}) scale(1 -1)')
        tags = [tag('defs', filter_defs), layer_group]
        return setup_svg(tags, bounds, margin=margin, arg_unit=arg_unit, svg_unit=svg_unit, pagecolor="white", tag=tag, inkscape=inkscape)

    def bounding_box(self, unit=MM, default=None):
        """ Calculate and return the bounding box of this layer stack. This bounding box will include all graphical
        objects on all layers and drill files. Consider using :py:meth:`~.layers.LayerStack.board_bounds` instead if you
        are interested in the actual board's bounding box, which usually will be smaller since there could be graphical
        objects sticking out of the board's outline, especially on drawing or silkscreen layers.

        :param unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). Which unit to return results in. Default: mm
        :param default: Default value to return if there are no objects on any layer.
        :returns: ``((x_min, y_min), (x_max, y_max))`` tuple of floats.
        :rtype: tuple
        """
        return sum_bounds(( layer.bounding_box(unit, default=default)
            for layer in itertools.chain(self.graphic_layers.values(), self.drill_layers) ), default=default)

    def board_bounds(self, unit=MM, default=None):
        """ Calculate and return the bounding box of this board's outline. If this board has no outline, this function
        falls back to :py:meth:`~.layers.LayerStack.bounding_box`, returning the bounding box of all objects on all
        layers and drill files instead.

        :param unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). Which unit to return results in. Default: mm
        :param default: Default value to return if there are no objects on any layer.
        :returns: ``((x_min, y_min), (x_max, y_max))`` tuple of floats.
        :rtype: tuple
        """
        if self.outline:
            return self.outline.instance.bounding_box(unit=unit, default=default)
        else:
            return self.bounding_box(unit=unit, default=default)

    def offset(self, x=0, y=0, unit=MM):
        """ Move all objects on all layers and drill files by the given amount in X and Y direction.

        :param x: :py:obj:`float` with length to move objects along X axis.
        :param y: :py:obj:`float` with length to move objects along Y axis.
        :param unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). Which unit ``x`` and ``y`` are specified
                     in. Default: mm
        """
        for layer in itertools.chain(self.graphic_layers.values(), self.drill_layers):
            layer.offset(x, y, unit=unit)

    def rotate(self, angle, cx=0, cy=0, unit=MM):
        """ Rotate all objects on all layers and drill files by the given angle around the given center of rotation
        (default: coordinate origin (0, 0)).

        :param angle: Rotation angle in radians.
        :param cx: :py:obj:`float` with X coordinate of center of rotation. Default: :py:obj:`0`.
        :param cy: :py:obj:`float` with Y coordinate of center of rotation. Default: :py:obj:`0`.
        :param unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). Which unit ``cx`` and ``cy`` are specified
                     in. Default: mm
        """
        for layer in itertools.chain(self.graphic_layers.values(), self.drill_layers):
            layer.rotate(angle, cx, cy, unit=unit)

    def scale(self, factor, unit=MM):
        """ Scale all objects on all layers and drill files by the given scaling factor. Only uniform scaling with one
        common factor for both X and Y is supported since non-uniform scaling would not work with either arcs or
        apertures in Gerber or Excellon files.

        :param factor: Scale factor. :py:obj:`1.0` for no scaling, :py:obj:`2.0` for doubling in both directions.
        :param unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``) for compatibility with other transform
                     methods. Default: mm
        """

        for layer in itertools.chain(self.graphic_layers.values(), self.drill_layers):
            layer.scale(factor)

    def merge_drill_layers(self):
        """ Merge all drill layers of this board into a single drill layer containing all objects. You can access this
        drill layer under the :py:attr:`.LayerStack.drill_mixed` attribute. The original layers are removed from the
        board. """
        target = ExcellonFile(comments=['Drill files merged by gerbonara'])

        for layer in self.drill_layers:
            if isinstance(layer, GerberFile):
                layer = layer.to_excellon()

            target.merge(layer)

        self.drill_pth = self.drill_npth = None
        self.drill_mixed = target

    def normalize_drill_layers(self):
        """ Take everything from all drill layers of this board, and sort it into three new drill layers: One with all
        non-plated objects, one with all plated objects, and one for all leftover objects with unknown plating. This
        method replaces the board's drill layers with these three sorted ones. """
        # TODO: maybe also separate into drill and route?
        drill_pth, drill_npth, drill_aux = [], [], []

        for layer in self.drill_layers:
            if isinstance(layer, GerberFile):
                layer = layer.to_excellon()

            if layer.is_plated:
                drill_pth.append(layer)
            elif layer.is_nonplated:
                drill_pth.append(layer)
            else:
                drill_aux.append(layer)
        
        pth_out, *rest = drill_pth or [ExcellonFile()]
        for layer in rest:
            pth_out.merge(layer)

        npth_out, *rest = drill_npth or [ExcellonFile()]
        for layer in rest:
            npth_out.merge(layer)

        unknown_out = ExcellonFile()
        for layer in drill_aux:
            for obj in layer.objects:
                if obj.plated is None:
                    unknown_out.append(obj)
                elif obj.plated:
                    pth_out.append(obj)
                else:
                    npth_out.append(obj)

        self.drill_pth, self.drill_npth = pth_out, npth_out
        self._drill_layers = [unknown_out] if unknown_out else []

    @property
    def drill_layers(self):
        """ Generator iterating all of this board's drill layers. """
        if self.drill_pth:
            yield self.drill_pth

        if self.drill_npth:
            yield self.drill_npth

        if self._drill_layers:
            yield from self._drill_layers

    @drill_layers.setter
    def drill_layers(self, value):
        self._drill_layers = value
        self.drill_pth = self.drill_npth = None

    def __len__(self):
        return len(self.graphic_layers)

    def get(self, index, default=None):
        if index in self:
            return self[index]
        else:
            return default

    def __contains__(self, index):
        if isinstance(index, str):
            side, _, use = index.partition(' ')
            return (side, use) in self.graphic_layers

        elif isinstance(index, tuple):
            return index in self.graphic_layers

        return index < len(self.copper_layers)

    def __getitem__(self, index):
        if isinstance(index, str):
            side, _, use = index.partition(' ')
            return self.graphic_layers[(side, use)]

        elif isinstance(index, tuple):
            return self.graphic_layers[index]

        return self.copper_layers[index][1]

    @property
    def copper_layers(self):
        """ Return all copper layers of this board as a list of ((side, use), layer) tuples. Returns an empty list if
        the board does not have any copper layers. """
        layers = [((side, use), layer) for (side, use), layer in self.graphic_layers.items() if use == 'copper']
        return sorted(layers, key=_sort_layername)

    @property
    def inner_layers(self):
        """ Return all inner copper layers of this board as a list of ((side, use), layer) tuples. Returns an empty list
        if the board does not have any inner layers. """
        layers = [((side, use), layer) for (side, use), layer in self.graphic_layers.items() if side.startswith('inner')]
        return sorted(layers, key=_sort_layername)

    @property
    def top_side(self):
        """ Return a dict containing the subset of layers from :py:meth:`~.layers.LayerStack.graphic_layers` that are on
        the board's top side. Includes the board outline layer, if available. """
        return { key: self[key] for key in ('top copper', 'top mask', 'top silk', 'top paste', 'mechanical outline') }

    @property
    def bottom_side(self):
        """ Return a dict containing the subset of layers from :py:meth:`~.layers.LayerStack.graphic_layers` that are on
        the board's bottom side. Includes the board outline layer, if available. """
        return { key: self[key] for key in ('bottom copper', 'bottom mask', 'bottom silk', 'bottom paste', 'mechanical outline') }

    @property
    def outline(self):
        """ Return this board's outline layer if available, or :py:obj:`None`. """
        return self.get('mechanical outline')

    def outline_svg_d(self, tol=0.01, unit=MM):
        """ Return this board's outline as SVG path data.

        :param tol: :py:obj:`float` setting the tolerance below which two points are considered equal
        :param unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). SVG document unit. Default: mm
        """
        chains = self.outline_polygons(tol, unit)
        polys = []
        for chain in chains:
            outline = [ (chain[0].x1, chain[0].y1), *((elem.x2, elem.y2) for elem in chain) ]
            arcs = [ (elem.clockwise, (elem.cx, elem.cy)) if isinstance(elem, gp.Arc) else None for elem in chain ]
            poly = gp.ArcPoly(outline=outline, arc_centers=arcs)
            polys.append(' '.join(poly.path_d()) + ' Z')
        return ' '.join(polys)

    def outline_convex_hull(self, tol=0.01, unit=MM):
        points = []
        for obj in self.outline.instance.objects:
            if isinstance(obj, go.Line):
                line = obj.as_primitive(unit)
                points.append((line.x1, line.y1))
                points.append((line.x2, line.y2))

            elif isinstance(obj, go.Arc):
                for obj in obj.approximate(tol, unit):
                    line = obj.as_primitive(unit)
                    points.append((line.x1, line.y1))
                    points.append((line.x2, line.y2))

        return convex_hull(points)
        
    def outline_polygons(self, tol=0.01, unit=MM):
        """ Iterator yielding this boards outline as a list of ordered :py:class:`~.graphic_objects.Arc` and
        :py:class:`~.graphic_objects.Line` objects. This method first sorts all lines and arcs on the outline layer into
        connected components, then orders them such that one object's end point is the next object's start point,
        flipping them where necessary. It yields one list of (likely mixed) :py:class:`~.graphic_objects.Arc` and
        :py:class:`~.graphic_objects.Line` objects per connected component.

        This method exists because the only convention in Gerber or Excellon outline files is that the outline segments
        are *visually contiguous*, but that does not necessarily mean that they will be in any particular order inside
        the G-code.

        :param tol: :py:obj:`float` setting the tolerance below which two points are considered equal
        :param unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). SVG document unit. Default: mm
        """
        polygons = []
        lines = [ obj.as_primitive(unit) for obj in self.outline.instance.objects if isinstance(obj, (go.Line, go.Arc)) ]

        by_x = sorted([ (obj.x1, obj) for obj in lines ] + [ (obj.x2, obj) for obj in lines ], key=lambda x: x[0])
        dist_sq = lambda x1, y1, x2, y2: (x2-x1)**2 + (y2-y1)**2

        joins = {}
        for cur in lines:
            for (i, x, y) in [(0, cur.x1, cur.y1), (1, cur.x2, cur.y2)]:
                x_left  = bisect.bisect_left (by_x, x, key=lambda elem: elem[0] + tol)
                x_right = bisect.bisect_right(by_x, x, key=lambda elem: elem[0] - tol)
                selected = { elem for elem_x, elem in by_x[x_left:x_right] if elem != cur }

                if not selected:
                    continue # loose end

                nearest = sorted(selected, key=lambda elem: min(dist_sq(elem.x1, elem.y1, x, y), dist_sq(elem.x2, elem.y2, x, y)))[0]

                d1, d2 = dist_sq(nearest.x1, nearest.y1, x, y), dist_sq(nearest.x2, nearest.y2, x, y)
                j = 0 if d1 < d2 else 1

                if (nearest, j) in joins and joins[(nearest, j)] != (cur, i):
                    warnings.warn(f'Three-way intersection on outline layer at: {(nearest, j)}; {(cur, i)}; and {joins[(nearest, j)]}. Falling back to returning the convex hull of the outline layer.')
                    return self.outline_convex_hull(tol, unit)

                if (cur, i) in joins and joins[(cur, i)] != (nearest, j):
                    warnings.warn(f'three-way intersection on outline layer at: {(nearest, j)}; {(cur, i)}; and {joins[(nearest, j)]}. Falling back to returning the convex hull of the outline layer.')
                    return self.outline_convex_hull(tol, unit)


                joins[(cur, i)] = (nearest, j)
                joins[(nearest, j)] = (cur, i)

        def flip_if(obj, cond):
            if cond:
                return obj.flip()
            else:
                return obj

        while joins:
            (first, i), (cur, j) = joins.popitem()
            del joins[(cur, j)]
            l = [ flip_if(first, not i), flip_if(cur, j) ]
            while cur != first and (cur, not j) in joins:
                cur, j = joins.pop((cur, not j))
                del joins[(cur, j)]
                l.append(flip_if(cur, j))
            yield l


    def _merge_layer(self, target, source, mode='above'):
        if source is None:
            return
        
        if self[target] is None:
            self[target] = source

        else:
            self[target].merge(source, mode)

    def merge(self, other, mode='above'):
        """ Merge ``other`` into ``self``, i.e. for all layers, add all objects that are in ``other`` to ``self``. This
        resets :py:attr:`.import_settings` and :py:attr:`~.CamFile.generator` on all layers. Units and other
        file-specific settings are handled automatically. For the meaning of the ``mode`` parameter, see
        :py:meth:`.GerberFile.merge`.

        Layers are matched by their logical side and function as they are found in
        :py:meth:`.LayerStack.graphic_layers`. Drill layers are normalized before merging, which splits them into
        exactly three drill layers: An non-plated one, a plated one, and a (hopefully empty) unknown plating one.
        """
        all_keys = set(self.graphic_layers.keys()) | set(other.graphic_layers.keys())
        exclude = { tuple(key.split()) for key in STANDARD_LAYERS }
        all_keys = { key for key in all_keys if key not in exclude }
        if all_keys:
            warnings.warn('Cannot merge unknown layer types: {" ".join(all_keys)}')

        for side in 'top', 'bottom':
            for use in 'copper', 'mask', 'silk', 'paste':
                if (side, use) in other:
                    self._merge_layer((side, use), other[side, use], mode)

        our_inner, their_inner = self.copper_layers[1:-1], other.copper_layers[1:-1]

        if bool(our_inner) != bool(their_inner):
            warnings.warn('Merging board without inner layers into board with inner layers, inner layers will be empty on first board.')

        elif our_inner and their_inner:
            warnings.warn('Merging boards with different inner layer counts. Will fill inner layers starting at core.')

        diff = len(our_inner) - len(their_inner)
        their_inner = ([None] * max(0, diff//2)) + their_inner + ([None] * max(0, diff//2))
        our_inner = ([None] * max(0, -diff//2)) + their_inner + ([None] * max(0, -diff//2))

        new_inner = []
        for ours, theirs in zip(our_inner, their_inner):
            if ours is None:
                new_inner.append(theirs)
            elif theirs is None:
                new_inner.append(ours)
            else:
                ours.merge(theirs)
                new_inner.append(ours)

        for i, layer in enumerate(new_inner, start=1):
            self[f'inner_{i} copper'] = layer

        self._merge_layer('mechanical outline', other['mechanical outline'])

        self.normalize_drill_layers()
        other.normalize_drill_layers()

        self.drill_pth.merge(other.drill_pth)
        self.drill_npth.merge(other.drill_npth)
        self._drill_layers.extend(other._drill_layers)

        if self.netlist:
            self.netlist.merge(other.netlist)
        else:
            self.netlist = other.netlist