path: root/gerbonara/gerber/excellon.py

#!/usr/bin/env python
# -*- coding: utf-8 -*-

# Copyright 2014 Hamilton Kibbe <ham@hamiltonkib.be>

# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     http://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

import math
import operator
import warnings
from enum import Enum
from dataclasses import dataclass
from collections import Counter

from .cam import CamFile, FileSettings
from .excellon_statements import *
from .graphic_objects import Drill, Slot
from .apertures import ExcellonTool
from .utils import Inch, MM


class ExcellonContext:
    def __init__(self, settings, tools):
        self.settings = settings
        self.tools = tools
        self.mode = None
        self.current_tool = None
        self.x, self.y = None, None

    def select_tool(self, tool):
        if self.current_tool != tool:
            self.current_tool = tool
            yield f'T{tools[tool]:02d}'

    def drill_mode(self):
        if self.mode != ProgramState.DRILLING:
            self.mode = ProgramState.DRILLING
            yield 'G05'

    def route_mode(self, unit, x, y):
        x, y = self.unit.from(unit, x), self.unit.from(unit, y)

        if self.mode == ProgramState.ROUTING and (self.x, self.y) == (x, y):
            return # nothing to do

        yield 'G00' + 'X' + self.settings.write_gerber_value(x) + 'Y' + self.settings.write_gerber_value(y)

    def set_current_point(self, unit, x, y):
        self.current_point = self.unit.from(unit, x), self.unit.from(unit, y)


class ExcellonFile(CamFile):
    def __init__(self, filename=None)
        super().__init__(filename=filename)
        self.objects = []
        self.comments = []
        self.import_settings = None

    def _generate_statements(self, settings):

        yield '; XNC file generated by gerbonara'
        if self.comments:
            yield '; Comments found in original file:'
        for comment in self.comments:
            yield ';' + comment

        yield 'M48'
        yield 'METRIC' if settings.unit == 'mm' else 'INCH'

        # Build tool index
        tools = set(obj.tool for obj in self.objects)
        tools = sorted(tools, key=lambda tool: (tool.plated, tool.diameter, tool.depth_offset))
        tools = { tool: index for index, tool in enumerate(tools, start=1) }

        if max(tools) >= 100:
            warnings.warn('More than 99 tools defined. Some programs may not like three-digit tool indices.', SyntaxWarning)

        for tool, index in tools.items():
            yield f'T{index:02d}' + tool.to_xnc(settings)

        yield '%'

        # Export objects
        for obj in self.objects:
            obj.to_xnc(ctx)

        yield 'M30'

    def to_excellon(self, settings=None):
        ''' Export to Excellon format. This function always generates XNC, which is a well-defined subset of Excellon.
        '''
        if settings is None:
            settings = self.import_settings.copy() or FileSettings()
            settings.zeros = None
            settings.number_format = (3,5)
        return '\n'.join(self._generate_statements(settings))

    def offset(self, x=0, y=0, unit=MM):
        self.objects = [ obj.with_offset(x, y, unit) for obj in self.objects ]

    def rotate(self, angle, cx=0, cy=0, unit=MM):
        for obj in self.objects:
            obj.rotate(angle, cx, cy, unit=unit)

    @property
    def has_mixed_plating(self):
        return len(set(obj.plated for obj in self.objects)) > 1
    
    @property
    def is_plated(self):
        return all(obj.plated for obj in self.objects)

    @property
    def is_nonplated(self):
        return not any(obj.plated for obj in self.objects)

    def empty(self):
        return self.objects.empty()

    def __len__(self):
        return len(self.objects)

    def split_by_plating(self):
        plated, nonplated = ExcellonFile(self.filename), ExcellonFile(self.filename)

        plated.comments = self.comments.copy()
        plated.import_settings = self.import_settings.copy()
        plated.objects = [ obj for obj in self.objects if obj.plated ]

        nonplated.comments = self.comments.copy()
        nonplated.import_settings = self.import_settings.copy()
        nonplated.objects = [ obj for obj in self.objects if not obj.plated ]

        return nonplated, plated

    def path_lengths(self, unit):
        """ Calculate path lengths per tool.

        Returns: dict { tool: float(path length) }

        This function only sums actual cut lengths, and ignores travel lengths that the tool is doing without cutting to
        get from one object to another. Travel lengths depend on the CAM program's path planning, which highly depends
        on panelization and other factors. Additionally, an EDA tool will not even attempt to minimize travel distance
        as that's not its job.
        """
        lengths = {}
        tool = None
        for obj in sorted(self.objects, key=lambda obj: obj.tool):
            if tool != obj.tool:
                tool = obj.tool
                lengths[tool] = 0

            lengths[tool] += obj.curve_length(unit)
        return lengths

    def hit_count(self):
        return Counter(obj.tool for obj in self.objects)

class RegexMatcher:
    def __init__(self):
        self.mapping = {}

    def match(self, regex):
        def wrapper(fun):
            nonlocal self
            self.mapping[regex] = fun
            return fun
        return wrapper

    def handle(self, inst, line):
        for regex, handler in self.mapping.items():
            if (match := re.fullmatch(regex, line)):
                handler(match)

class ProgramState(Enum):
    HEADER = 0
    DRILLING = 1
    ROUTING = 2
    FINISHED = 2

class InterpMode(Enum):
    LINEAR = 0
    CIRCULAR_CW = 1
    CIRCULAR_CCW = 2


class ExcellonParser(object):
    def __init__(self):
        self.settings = FileSettings(number_format=(2,4))
        self.program_state = None
        self.interpolation_mode = InterpMode.LINEAR
        self.statements = []
        self.tools = {}
        self.comment_tools = {}
        self.hits = []
        self.active_tool = None
        self.pos = 0, 0
        self.drill_down = False
        self.is_plated = None

    @property
    def coordinates(self):
        return [(stmt.x, stmt.y) for stmt in self.statements if isinstance(stmt, CoordinateStmt)]

    @property
    def bounds(self):
        xmin = ymin = 100000000000
        xmax = ymax = -100000000000
        for x, y in self.coordinates:
            if x is not None:
                xmin = x if x < xmin else xmin
                xmax = x if x > xmax else xmax
            if y is not None:
                ymin = y if y < ymin else ymin
                ymax = y if y > ymax else ymax
        return ((xmin, xmax), (ymin, ymax))

    @property
    def hole_sizes(self):
        return [stmt.diameter for stmt in self.statements if isinstance(stmt, ExcellonTool)]

    @property
    def hole_count(self):
        return len(self.hits)

    def parse(self, filename):
        with open(filename, 'r') as f:
            data = f.read()
        return self.parse_raw(data, filename)

    def parse_raw(self, data, filename=None):
        for line in data.splitlines():
            self._parse_line(line.strip())
        for stmt in self.statements:
            stmt.units = self.units
        return ExcellonFile(self.statements, self.tools, self.hits, self.settings, filename)

    def parse(self, filelike):
        leftover = None
        for line in filelike:
            line = line.strip()

            if not line:
                continue

            # Coordinates of G00 and G01 may be on the next line
            if line == 'G00' or line == 'G01':
                if leftover:
                    warnings.warn('Two consecutive G00/G01 commands without coordinates. Ignoring first.', SyntaxWarning)
                leftover = line
                continue

            if leftover:
                line = leftover + line
                leftover = None

            if line and self.program_state == ProgramState.FINISHED:
                warnings.warn('Commands found following end of program statement.', SyntaxWarning)
            # TODO check first command in file is "start of header" command.

            self.exprs.handle(self, line)

    exprs = RegexMatcher()

    # NOTE: These must be kept before the generic comment handler at the end of this class so they match first.
    @exprs.match(';T(?P<index1>[0-9]+) Holesize (?P<index2>[0-9]+)\. = (?P<diameter>[0-9/.]+) Tolerance = \+[0-9/.]+/-[0-9/.]+ (?P<plated>PLATED|NON_PLATED|OPTIONAL) (?P<unit>MILS|MM) Quantity = [0-9]+')
    def parse_allegro_tooldef(self, match)
        # NOTE: We ignore the given tolerances here since they are non-standard.
        self.program_state = ProgramState.HEADER # TODO is this needed? we need a test file.

        if (index := int(match['index1'])) != int(match['index2']): # index1 has leading zeros, index2 not.
            raise SyntaxError('BUG: Allegro excellon tool def has mismatching tool indices. Please file a bug report on our issue tracker and provide this file!')

        if index in self.tools:
            warnings.warn('Re-definition of tool index {index}, overwriting old definition.', SyntaxWarning) 

        # NOTE: We map "optionally" plated holes to plated holes for API simplicity. If you hit a case where that's a
        # problem, please raise an issue on our issue tracker, explain why you need this and provide an example file.
        is_plated = None if match['plated'] is None else (match['plated'] in ('PLATED', 'OPTIONAL'))

        diameter = float(match['diameter'])

        if match['unit'] == 'MILS':
            diameter /= 1000
            unit = Inch
        else:
            unit = MM

        self.tools[index] = ExcellonTool(diameter=diameter, plated=is_plated, unit=unit)

    # Searching Github I found that EasyEDA has two different variants of the unit specification here.
    easyeda_comment = re.compile(';Holesize (?P<index>[0-9]+) = (?P<diameter>[.0-9]+) (?P<unit>INCH|inch|METRIC|mm)')
    def parse_easyeda_tooldef(self, match):
        unit = Inch if match['unit'].lower() == 'inch' else MM
        tool = ExcellonTool(diameter=float(match['diameter']), unit=unit, plated=self.is_plated)

        if (index := int(match['index'])) in self.tools:
            warnings.warn('Re-definition of tool index {index}, overwriting old definition.', SyntaxWarning) 

        tools[index] = tool

    @exprs.match('T([0-9]+)(([A-Z][.0-9]+)+)') # Tool definition: T** with at least one parameter
    def parse_tool_definition(self, match):
        # We ignore parameters like feed rate or spindle speed that are not used for EDA -> CAM file transfer. This is
        # not a parser for the type of Excellon files a CAM program sends to the machine.

        if (index := int(match[1])) in self.tools:
            warnings.warn('Re-definition of tool index {index}, overwriting old definition.', SyntaxWarning) 

        params = { m[0]: settings.parse_gerber_value(m[1:]) for m in re.findall('[BCFHSTZ][.0-9]+', match[2]) }
        self.tools[index] = ExcellonTool(diameter=params.get('C'), depth_offset=params.get('Z'), plated=self.is_plated)

    @exprs.match('T([0-9]+)')
    def parse_tool_selection(self, match):
        index = int(match[1])

        if index == 0: # T0 is used as END marker, just ignore
            return
        elif index not in self.tools:
            raise SyntaxError(f'Undefined tool index {index} selected.')

        self.active_tool = self.tools[index]

    @exprs.match(r'R(?P<count>[0-9]+)' + xy_coord).match(line)
    def handle_repeat_hole(self, match):
        if self.program_state == ProgramState.HEADER:
            return

        dx = int(match['x'] or '0')
        dy = int(match['y'] or '0')

        for i in range(int(match['count'])):
            self.pos[0] += dx
            self.pos[1] += dy
            # FIXME fix API below
            if not self.ensure_active_tool():
                return

            self.objects.append(Flash(*self.pos, self.active_tool, unit=self.settings.unit))

    def header_command(fun):
        @functools.wraps(fun)
        def wrapper(*args, **kwargs):
            if self.program_state is None:
                warnings.warn('Header statement found before start of header')
            elif self.program_state != ProgramState.HEADER:
                warnings.warn('Header statement found after end of header')
            fun(*args, **kwargs)
        return wrapper

    @exprs.match('M48')
    def handle_begin_header(self, match):
        if self.program_state is not None:
            warnings.warn(f'M48 "header start" statement found in the middle of the file, currently in {self.program_state}', SyntaxWarning)
        self.program_state = ProgramState.HEADER

    @exprs.match('M95')
    @header_command
    def handle_end_header(self, match)
        self.program_state = ProgramState.DRILLING

    @exprs.match('M00')
    def handle_next_tool(self, match):
        #FIXME is this correct? Shouldn't this be "end of program"?
        if self.active_tool:
            self.active_tool = self.tools[self.tools.index(self.active_tool) + 1]

        else:
            warnings.warn('M00 statement found before first tool selection statement.', SyntaxWarning)

    @exprs.match('M15')
    def handle_drill_down(self, match):
        self.drill_down = True

    @exprs.match('M16|M17')
    def handle_drill_up(self, match):
        self.drill_down = False


    @exprs.match('M30')
    def handle_end_of_program(self, match):
        if self.program_state in (None, ProgramState.HEADER):
            warnings.warn('M30 statement found before end of header.', SyntaxWarning)
        self.program_state = FINISHED
        # ignore.
        # TODO: maybe add warning if this is followed by other commands.

    coord = lambda name, key=None: f'(?P<{key or name}>{name}[+-]?[0-9]*\.?[0-9]*)?'
    xy_coord = coord('X') + coord('Y')

    def do_move(self, match=None, x='X', y='Y'):
        x = settings.parse_gerber_value(match['X'])
        y = settings.parse_gerber_value(match['Y'])

        old_pos = self.pos

        if self.settings.absolute:
            if x is not None:
                self.pos[0] = x
            if y is not None:
                self.pos[1] = y
        else: # incremental
            if x is not None:
                self.pos[0] += x
            if y is not None:
                self.pos[1] += y

        return old_pos, new_pos

    @exprs.match('G00' + xy_coord)
    def handle_start_routing(self, match):
        if self.program_state is None:
            warnings.warn('Routing mode command found before header.', SyntaxWarning)
        self.program_state = ProgramState.ROUTING
        self.do_move(match)

    @exprs.match('%')
    def handle_rewind_shorthand(self, match):
        if self.program_state is None:
            self.program_state = ProgramState.HEADER
        elif self.program_state is ProgramState.HEADER:
            self.program_state = ProgramState.DRILLING
        # FIXME handle rewind start

    @exprs.match('G05')
    def handle_drill_mode(self, match):
        self.drill_down = False
        self.program_state = ProgramState.DRILLING

    def ensure_active_tool(self):
        if self.active_tool:
            return self.active_tool
        
        if (self.active_tool := self.tools.get(1)): # FIXME is this necessary? It seems pretty dumb.
            return self.active_tool

        warnings.warn('Routing command found before first tool definition.', SyntaxWarning)
        return None

    @exprs.match('(?P<mode>G01|G02|G03)' + xy_coord + aij_coord)
    def handle_linear_mode(self, match):
        if match['mode'] == 'G01':
            self.interpolation_mode = InterpMode.LINEAR
        else:
            clockwise = (match['mode'] == 'G02')
            self.interpolation_mode = InterpMode.CIRCULAR_CW if clockwise else InterpMode.CIRCULAR_CCW

        self.do_interpolation(match)
    
    def do_interpolation(self, match):
        x, y, a, i, j = match['x'], match['y'], match['a'], match['i'], match['j']

        start, end = self.do_move(match)

        # Yes, drills in the header doesn't follow the specification, but it there are many files like this
        if self.program_state not in (ProgramState.DRILLING, ProgramState.HEADER):
            return

        if not self.drill_down or not (match['x'] or match['y']) or not self.ensure_active_tool():
            return

        if self.interpolation_mode == InterpMode.LINEAR:
            if a or i or j:
                warnings.warn('A/I/J arc coordinates found in linear mode.', SyntaxWarning)

            self.objects.append(Line(*start, *end, self.active_tool, unit=self.settings.unit))

        else:
            if (x or y) and not (a or i or j):
                warnings.warn('Arc without radius found.', SyntaxWarning)

            clockwise = (self.interpolation_mode == InterpMode.CIRCULAR_CW)
            
            if a:
                if i or j:
                    warnings.warn('Arc without both radius and center specified.', SyntaxWarning)

                r = settings.parse_gerber_value(a)
                # from https://math.stackexchange.com/a/1781546
                x1, y1 = start
                x2, y2 = end
                dx, dy = (x2-x1)/2, (y2-y1)/2
                x0, y0 = x1+dx, y1+dy
                f = math.hypot(dx, dy) / math.sqrt(r**2 - a**2)
                if clockwise:
                    cx = x0 + f*dy
                    cy = y0 - f*dx
                else:
                    cx = x0 - f*dy
                    cy = y0 + f*dx
                i, j = cx-start[0], cy-start[1]
            else:
                i = settings.parse_gerber_value(i)
                j = settings.parse_gerber_value(j)

            self.objects.append(Arc(*start, *end, i, j, True, self.active_tool, unit=self.settings.unit))

    @exprs.match('M71|METRIC') # XNC uses "METRIC"
    @header_command
    def handle_metric_mode(self, match):
        self.settings.unit = MM

    @exprs.match('M72|INCH') # XNC uses "INCH"
    @header_command
    def handle_inch_mode(self, match):
        self.settings.unit = Inch
    
    @exprs.match('G90')
    @header_command
    def handle_absolute_mode(self, match):
        self.settings.notation = 'absolute'

    @exprs.match('ICI,?(ON|OFF)')
    def handle_incremental_mode(self, match):
        self.settings.notation = 'absolute' if match[1] == 'OFF' else 'incremental'

    @exprs.match('(FMAT|VER),?([0-9]*)')
    def handle_command_format(self, match):
        # We do not support integer/fractional decimals specification via FMAT because that's stupid. If you need this,
        # please raise an issue on our issue tracker, provide a sample file and tell us where on earth you found that
        # file.
        if match[2] not in ('', '2'):
            raise SyntaxError(f'Unsupported FMAT format version {match["version"]}')

    @exprs.match('G40|G41|G42|{coord("F")}')
    def handle_unhandled(self, match):
        warnings.warn(f'{match[0]} excellon command intended for CAM tools found in EDA file.', SyntaxWarning)

    @exprs.match(coord('X', 'x1') + coord('Y', 'y1') + 'G85' + coord('X', 'x2') + coord('Y', 'y2'))
    def handle_slot_dotted(self, match):
        warnings.warn('Weird G85 excellon slot command used. Please raise an issue on our issue tracker and provide this file for testing.', SyntaxWarning)
        self.do_move(match, 'X1', 'Y1')
        start, end = self.do_move(match, 'X2', 'Y2')
        
        if self.program_state in (ProgramState.DRILLING, ProgramState.HEADER): # FIXME should we realy handle this in header?
            if self.ensure_active_tool():
                # We ignore whether a slot is a "routed" G00/G01 slot or a "drilled" G85 slot and export both as routed
                # slots.
                self.objects.append(Line(*start, *end, self.active_tool, unit=self.settings.unit))

    @exprs.match(xy_coord)
    def handle_naked_coordinate(self, match):
        self.do_interpolation(match)

    @exprs.match(';FILE_FORMAT=([0-9]:[0-9])')
    def parse_altium_number_format_comment(self, match):
        x, _, y = fmt.partition(':')
        self.settings.number_format = int(x), int(y)

    @exprs.match(';TYPE=(PLATED|NON_PLATED)')
    def parse_altium_composite_plating_comment(self, match):
        # These can happen both before a tool definition and before a tool selection statement.
        # FIXME make sure we do the right thing in both cases.
        self.is_plated = (match[1] == 'PLATED')
    
    @exprs.match(';HEADER:')
    def parse_allegro_start_of_header(self, match):
        self.program_state = ProgramState.HEADER

    @exprs.match(';(.*)')
    def parse_comment(self, match)
        target.comments.append(match[1].strip())