From 176252b564deb168a6c7823ce313aa0d7bba9095 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sat, 29 Apr 2023 23:11:29 +0200 Subject: Protoserve fixes, add doc to protoboard.py --- gerbonara/cad/protoboard.py | 28 ++++++++++++++++++++++++--- gerbonara/cad/protoserve.py | 3 ++- gerbonara/cad/protoserve_data/protoserve.html | 11 ++++++++--- 3 files changed, 35 insertions(+), 7 deletions(-) (limited to 'gerbonara') diff --git a/gerbonara/cad/protoboard.py b/gerbonara/cad/protoboard.py index 02cbb65..af61085 100644 --- a/gerbonara/cad/protoboard.py +++ b/gerbonara/cad/protoboard.py @@ -313,8 +313,8 @@ class ManhattanPads(ObjectGroup): small_ap = RectangleAperture(p, q, unit=unit) s = min(w, h) / 2 / math.sqrt(2) - large_ap = RectangleAperture(s, s, rotation=math.pi/4, unit=unit) - large_ap_neg = RectangleAperture(s+2*gap, s+2*gap, rotation=math.pi/4, unit=unit) + large_ap = RectangleAperture(s, s, unit=unit).rotated(math.pi/4) + large_ap_neg = RectangleAperture(s+2*gap, s+2*gap, unit=unit).rotated(math.pi/4) a = gap/2 + p/2 b = gap/2 + q/2 @@ -345,7 +345,7 @@ class RFGroundProto(ObjectGroup): trace_width = pitch - pad_dia - 2*clearance self.pad_dia = pad_dia - via_ap = RectangleAperture(via_dia, via_dia, rotation=math.pi/4, unit=unit) + via_ap = RectangleAperture(via_dia, via_dia, unit=unit).rotated(math.pi/4) pad_ap = CircleAperture(pad_dia, unit=unit) pad_neg_ap = CircleAperture(pad_dia+2*clearance, unit=unit) ground_ap = RectangleAperture(pitch + unit(0.01, MM), pitch + unit(0.01, MM), unit=unit) @@ -405,6 +405,21 @@ class THTFlowerProto(ObjectGroup): return unit.convert_bounds_from(self.unit, ((x-p, y-p), (x+p, y+p))) class PoweredProto(ObjectGroup): + """ Cell primitive for "powered" THT breadboards. This cell type is based on regular THT pads in a 100 mil grid, but + adds small SMD pads diagonally between the THT pads. These SMD pads are interconnected with traces and vias in such + a way that every second one is inter-linked, forming two fully connected grids. Next to every THT pad you have one + pad of each grid, so this layout is awesome for distributing power throughout the board. + + This design is based on one that Yajima Manufacturing Akizuki Denshi, Akihabara's finest electronics store sells for + next to nothing. Sadly, they don't ship internationally and they don't even have an English website, but if you ever + are in Akihabara, Tokyo, Japan I can *highly* recommend a visit. The ones Yajima make are better than what this will + produce since the Yajima ones use a two-colored silkscreen to visually distinguish the two power pad grids. + + Links: + Akizuki Denshi product page: https://akizukidenshi.com/catalog/g/gP-07214/ + Yajima Manufacturing Corporation website: http://www.yajima-works.co.jp/index.html + """ + def __init__(self, pitch=None, drill=None, clearance=None, power_pad_dia=None, via_size=None, trace_width=None, unit=MM): super().__init__(0, 0) self.unit = unit @@ -472,6 +487,13 @@ class PoweredProto(ObjectGroup): class SpikyProto(ObjectGroup): + """ Cell primitive for the "spiky" protoboard designed by @electroniceel and published on github at the URL below. + This layout has small-ish standard THT pads, but in between these pads it puts a grid of SMD pads that are designed + for easy solder bridging to allow for the construction of traces from solder bridging. + + Github URL: https://github.com/electroniceel/protoboard + """ + def __init__(self, pitch=None, drill=None, clearance=None, power_pad_dia=None, via_size=None, trace_width=None, unit=MM): super().__init__(0, 0, unit=unit) res = importlib.resources.files(package_data) diff --git a/gerbonara/cad/protoserve.py b/gerbonara/cad/protoserve.py index c425af7..8512ca5 100644 --- a/gerbonara/cad/protoserve.py +++ b/gerbonara/cad/protoserve.py @@ -97,8 +97,9 @@ def deserialize(obj, unit): pitch = mil(float(obj.get('pitch', 2.54))) hole_dia = mil(float(obj['hole_dia'])) via_drill = mil(float(obj['via_hole_dia'])) + via_dia = mil(float(obj['via_dia'])) trace_width = mil(float(obj['trace_width'])) - return pb.PatternProtoArea(pitch, pitch, pb.PoweredProto(pitch, hole_dia, clearance, via_size=via_drill, trace_width=trace_width, unit=unit), unit=unit) + return pb.PatternProtoArea(pitch, pitch, pb.PoweredProto(pitch, hole_dia, clearance, via_size=via_drill, power_pad_dia=via_dia, trace_width=trace_width, unit=unit), unit=unit) case 'flower': pitch = mil(float(obj.get('pitch', 2.54))) diff --git a/gerbonara/cad/protoserve_data/protoserve.html b/gerbonara/cad/protoserve_data/protoserve.html index 215f3b7..ad612ac 100644 --- a/gerbonara/cad/protoserve_data/protoserve.html +++ b/gerbonara/cad/protoserve_data/protoserve.html @@ -536,17 +536,22 @@ input { mil + -- cgit