summaryrefslogtreecommitdiff
path: root/gerberex/dxf.py
diff options
context:
space:
mode:
Diffstat (limited to 'gerberex/dxf.py')
-rw-r--r--gerberex/dxf.py205
1 files changed, 162 insertions, 43 deletions
diff --git a/gerberex/dxf.py b/gerberex/dxf.py
index 11072b5..a2c26d0 100644
--- a/gerberex/dxf.py
+++ b/gerberex/dxf.py
@@ -8,13 +8,18 @@ from math import pi, cos, sin, tan, atan, atan2, acos, asin, sqrt
from gerber.cam import CamFile, FileSettings
from gerber.utils import inch, metric, write_gerber_value
from gerber.gerber_statements import ADParamStmt
+from gerber.excellon_statements import ExcellonTool
+from gerber.excellon_statements import CoordinateStmt
import dxfgrabber
class DxfStatement(object):
def __init__(self, entity):
self.entity = entity
- def to_gerber(self, settings=None):
+ def to_gerber(self, settings=None, pitch=0, width=0):
+ pass
+
+ def to_excellon(self, settings=None, pitch=0, width=0):
pass
def to_inch(self):
@@ -27,39 +32,77 @@ class DxfLineStatement(DxfStatement):
def __init__(self, entity):
super(DxfLineStatement, self).__init__(entity)
- def to_gerber(self, settings=FileSettings):
- x0 = self.entity.start[0]
- y0 = self.entity.start[1]
- x1 = self.entity.end[0]
- y1 = self.entity.end[1]
- return 'G01*\nX{0}Y{1}D02*\nX{2}Y{3}D01*'.format(
- write_gerber_value(x0, settings.format,
- settings.zero_suppression),
- write_gerber_value(y0, settings.format,
- settings.zero_suppression),
- write_gerber_value(x1, settings.format,
- settings.zero_suppression),
- write_gerber_value(y1, settings.format,
- settings.zero_suppression)
- )
+ def to_gerber(self, settings=FileSettings(), pitch=0, width=0):
+ if pitch == 0:
+ x0 = self.entity.start[0]
+ y0 = self.entity.start[1]
+ x1 = self.entity.end[0]
+ y1 = self.entity.end[1]
+ return 'G01*\nX{0}Y{1}D02*\nX{2}Y{3}D01*'.format(
+ write_gerber_value(x0, settings.format,
+ settings.zero_suppression),
+ write_gerber_value(y0, settings.format,
+ settings.zero_suppression),
+ write_gerber_value(x1, settings.format,
+ settings.zero_suppression),
+ write_gerber_value(y1, settings.format,
+ settings.zero_suppression)
+ )
+ else:
+ gstr = ""
+ for p in self._dots(pitch, width):
+ gstr += 'X{0}Y{1}D03*\n'.format(
+ write_gerber_value(p[0], settings.format,
+ settings.zero_suppression),
+ write_gerber_value(p[1], settings.format,
+ settings.zero_suppression))
+ return gstr
+
+ def to_excellon(self, settings=FileSettings(), pitch=0, width=0):
+ if not pitch:
+ return
+ gstr = ""
+ for p in self._dots(pitch, width):
+ gstr += CoordinateStmt(x=p[0], y=p[1]).to_excellon(settings) + '\n'
+ return gstr
def to_inch(self):
- self.entity.start[idx] = (
- inch(self.entity.start[idx][0]), inch(self.entity.start[idx][1]))
- self.entity.end[idx] = (
- inch(self.entity.end[idx][0]), inch(self.entity.end[idx][1]))
+ self.entity.start = (
+ inch(self.entity.start[0]), inch(self.entity.start[1]))
+ self.entity.end = (
+ inch(self.entity.end[0]), inch(self.entity.end[1]))
def to_metric(self):
- self.entity.start[idx] = (
- metric(self.entity.start[idx][0]), inch(self.entity.start[idx][1]))
- self.entity.end[idx] = (
- metric(self.entity.end[idx][0]), inch(self.entity.end[idx][1]))
+ self.entity.start = (
+ metric(self.entity.start[0]), inch(self.entity.start[1]))
+ self.entity.end = (
+ metric(self.entity.end[0]), inch(self.entity.end[1]))
+
+ def _dots(self, pitch, width):
+ x0 = self.entity.start[0]
+ y0 = self.entity.start[1]
+ x1 = self.entity.end[0]
+ y1 = self.entity.end[1]
+ xp = x1 - x0
+ yp = y1 - y0
+ l = sqrt(xp * xp + yp * yp)
+ xd = xp * pitch / l
+ yd = yp * pitch / l
+
+ d = 0;
+ while d < l + width / 2:
+ yield (x0, y0)
+ x0 += xd
+ y0 += yd
+ d += pitch
class DxfCircleStatement(DxfStatement):
def __init__(self, entity):
super(DxfCircleStatement, self).__init__(entity)
- def to_gerber(self, settings=FileSettings):
+ def to_gerber(self, settings=FileSettings(), pitch=0, width=0):
+ if pitch:
+ return
r = self.entity.radius
x0 = self.entity.center[0]
y0 = self.entity.center[1]
@@ -82,19 +125,21 @@ class DxfCircleStatement(DxfStatement):
def to_inch(self):
self.entity.radius = inch(self.entity.radius)
- self.entity.center[idx] = (
- inch(self.entity.center[idx][0]), inch(self.entity.center[idx][1]))
+ self.entity.center = (
+ inch(self.entity.center[0]), inch(self.entity.center[1]))
def to_metric(self):
self.entity.radius = metric(self.entity.radius)
- self.entity.center[idx] = (
- metric(self.entity.center[idx][0]), metric(self.entity.center[idx][1]))
+ self.entity.center = (
+ metric(self.entity.center[0]), metric(self.entity.center[1]))
class DxfArcStatement(DxfStatement):
def __init__(self, entity):
super(DxfArcStatement, self).__init__(entity)
- def to_gerber(self, settings=FileSettings):
+ def to_gerber(self, settings=FileSettings(), pitch=0, width=0):
+ if pitch:
+ return
deg0 = self.entity.start_angle
deg1 = self.entity.end_angle
r = self.entity.radius
@@ -126,21 +171,23 @@ class DxfArcStatement(DxfStatement):
self.entity.start_angle = inch(self.entity.start_angle)
self.entity.end_angle = inch(self.entity.end_angle)
self.entity.radius = inch(self.entity.radius)
- self.entity.center[idx] = (
- inch(self.entity.center[idx][0]), inch(self.entity.center[idx][1]))
+ self.entity.center = (
+ inch(self.entity.center[0]), inch(self.entity.center[1]))
def to_metric(self):
self.entity.start_angle = metric(self.entity.start_angle)
self.entity.end_angle = metric(self.entity.end_angle)
self.entity.radius = metric(self.entity.radius)
- self.entity.center[idx] = (
- metric(self.entity.center[idx][0]), metric(self.entity.center[idx][1]))
+ self.entity.center = (
+ metric(self.entity.center[0]), metric(self.entity.center[1]))
class DxfPolylineStatement(DxfStatement):
def __init__(self, entity):
super(DxfPolylineStatement, self).__init__(entity)
- def to_gerber(self, settings=FileSettings()):
+ def to_gerber(self, settings=FileSettings(), pitch=0, width=0):
+ if pitch:
+ return
x0 = self.entity.points[0][0]
y0 = self.entity.points[0][1]
b = self.entity.bulge[0]
@@ -214,6 +261,8 @@ class DxfStatements(object):
self._units = units
self.dcode = dcode
self.draw_mode = draw_mode
+ self.pitch = inch(1) if self._units == 'unit' else 1
+ self.width = 0
self.statements = []
for entity in entities:
if entity.dxftype == 'LWPOLYLINE':
@@ -241,19 +290,33 @@ class DxfStatements(object):
yield 'G37*'
else:
for statement in self.statements:
- yield statement.to_gerber(settings)
+ yield statement.to_gerber(
+ settings,
+ pitch=self.pitch if self.draw_mode == DxfFile.DM_MOUSE_BITES else 0,
+ width=self.width)
return '\n'.join(gerbers())
+ def to_excellon(self, settings=FileSettings()):
+ if not self.draw_mode == DxfFile.DM_MOUSE_BITES:
+ return
+ def drills():
+ for statement in self.statements:
+ if isinstance(statement, DxfLineStatement):
+ yield statement.to_excellon(settings, pitch=self.pitch, width=self.width)
+ return '\n'.join(drills())
+
def to_inch(self):
if self._units == 'metric':
self._units = 'inch'
+ self.pitch = inch(self.pitch)
for statement in self.statements:
statement.to_inch()
def to_metric(self):
if self._units == 'inch':
self._units = 'metric'
+ self.pitch = metric(self.pitch)
for statement in self.statements:
statement.to_metric()
@@ -270,6 +333,32 @@ class DxfHeaderStatement(object):
settings.format[0], settings.format[1],
settings.format[0], settings.format[1]
)
+
+ def to_excellon(self, settings):
+ return 'M48\n'\
+ 'FMAT,2\n'\
+ 'ICI,{0}\n'\
+ '{1},{2},{3}.{4}\n'\
+ '{5}'.format(
+ 'ON' if settings.notation == 'incremental' else 'OFF',
+ 'INCH' if settings.units == 'inch' else 'METRIC',
+ 'TZ' if settings.zero_suppression == 'leading' else 'LZ',
+ '0' * settings.format[0], '0' * settings.format[1],
+ 'M72' if settings.units == 'inch' else 'M71'
+ )
+
+ def to_inch(self):
+ pass
+
+ def to_metric(self):
+ pass
+
+class DxfHeader2Statement(object):
+ def to_gerber(self, settings):
+ pass
+
+ def to_excellon(self, settings):
+ return '%'
def to_inch(self):
pass
@@ -280,8 +369,15 @@ class DxfHeaderStatement(object):
class DxfFile(CamFile):
DM_LINE = 0
DM_FILL = 1
+ DM_MOUSE_BITES = 2
+
+ FT_RX274X = 0
+ FT_EXCELLON = 1
+
+ def __init__(self, dxf, settings=None, draw_mode=None, filename=None):
+ if not settings:
+ settings = FileSettings(zero_suppression='leading')
- def __init__(self, dxf, settings=FileSettings(), draw_mode=None, filename=None):
if draw_mode == None:
draw_mode = self.DM_LINE
if dxf.header['$INSUNITS'] == 1:
@@ -294,6 +390,8 @@ class DxfFile(CamFile):
super(DxfFile, self).__init__(settings=settings, filename=filename)
self._draw_mode = draw_mode
self.header = DxfHeaderStatement()
+
+ self.header2 = DxfHeader2Statement()
self.aperture = ADParamStmt.circle(dcode=10, diameter=0.0)
self.statements = DxfStatements(dxf.entities, self.units, dcode=self.aperture.d, draw_mode=self.draw_mode)
@@ -313,6 +411,7 @@ class DxfFile(CamFile):
@width.setter
def width(self, value):
self.aperture.modifiers = ([float(value),],)
+ self.statements.width = value
@property
def draw_mode(self):
@@ -322,23 +421,42 @@ class DxfFile(CamFile):
def draw_mode(self, value):
self._draw_mode = value
self.statements.draw_mode = value
+
+ @property
+ def pitch(self):
+ return self.statements.pitch
- def write(self, filename=None):
+ @pitch.setter
+ def pitch(self, value):
+ self.statements.pitch = value
+
+ def write(self, filename=None, filetype=FT_RX274X):
if self.settings.notation != 'absolute':
raise Exception('DXF file\'s notation must be absolute ')
-
+
filename = filename if filename is not None else self.filename
with open(filename, 'w') as f:
- f.write(self.header.to_gerber(self.settings) + '\n')
- f.write(self.aperture.to_gerber(self.settings) + '\n')
- f.write(self.statements.to_gerber(self.settings) + '\n')
- f.write('M02*\n')
+ if filetype == self.FT_RX274X:
+ f.write(self.header.to_gerber(self.settings) + '\n')
+ f.write(self.aperture.to_gerber(self.settings) + '\n')
+ f.write(self.statements.to_gerber(self.settings) + '\n')
+ f.write('M02*\n')
+ else:
+ tool = ExcellonTool(self.settings, number=1, diameter=self.width)
+ f.write(self.header.to_excellon(self.settings) + '\n')
+ f.write(tool.to_excellon(self.settings) + '\n')
+ f.write(self.header2.to_excellon(self.settings) + '\n')
+ f.write('T01\n')
+ f.write(self.statements.to_excellon(self.settings) + '\n')
+ f.write('M30\n')
+
def to_inch(self):
if self.units == 'metric':
self.header.to_inch()
self.aperture.to_inch()
self.statements.to_inch()
+ self.pitch = inch(self.pitch)
self.units = 'inch'
def to_metric(self):
@@ -346,6 +464,7 @@ class DxfFile(CamFile):
self.header.to_metric()
self.aperture.to_metric()
self.statements.to_metric()
+ self.pitch = metric(self.pitch)
self.units = 'metric'
def offset(self, ofset_x, offset_y):