diff options
Diffstat (limited to 'gerber/ipc356.py')
| -rw-r--r-- | gerber/ipc356.py | 461 |
1 files changed, 461 insertions, 0 deletions
diff --git a/gerber/ipc356.py b/gerber/ipc356.py new file mode 100644 index 0000000..7dadd22 --- /dev/null +++ b/gerber/ipc356.py @@ -0,0 +1,461 @@ +#! /usr/bin/env python +# -*- coding: utf-8 -*- + +# copyright 2014 Hamilton Kibbe <ham@hamiltonkib.be> +# Modified from parser.py by Paulo Henrique Silva <ph.silva@gmail.com> +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at + +# http://www.apache.org/licenses/LICENSE-2.0 + +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +import math +import re +from .cam import CamFile, FileSettings +from .primitives import TestRecord + +# Net Name Variables +_NNAME = re.compile(r'^NNAME\d+$') + +# Board Edge Coordinates +_COORD = re.compile(r'X?(?P<x>[\d\s]*)?Y?(?P<y>[\d\s]*)?') + +_SM_FIELD = { + '0': 'none', + '1': 'primary side', + '2': 'secondary side', + '3': 'both'} + + +def read(filename): + """ Read data from filename and return an IPC_D_356 + Parameters + ---------- + filename : string + Filename of file to parse + + Returns + ------- + file : :class:`gerber.ipc356.IPC_D_356` + An IPC_D_356 object created from the specified file. + + """ + # File object should use settings from source file by default. + return IPC_D_356.from_file(filename) + + +class IPC_D_356(CamFile): + + @classmethod + def from_file(cls, filename): + parser = IPC_D_356_Parser() + return parser.parse(filename) + + def __init__(self, statements, settings, primitives=None, filename=None): + self.statements = statements + self.units = settings.units + self.angle_units = settings.angle_units + self.primitives = [TestRecord((rec.x_coord, rec.y_coord), rec.net_name, + rec.access) for rec in self.test_records] + self.filename = filename + + @property + def settings(self): + return FileSettings(units=self.units, angle_units=self.angle_units) + + @property + def comments(self): + return [record for record in self.statements + if isinstance(record, IPC356_Comment)] + + @property + def parameters(self): + return [record for record in self.statements + if isinstance(record, IPC356_Parameter)] + + @property + def test_records(self): + return [record for record in self.statements + if isinstance(record, IPC356_TestRecord)] + + @property + def nets(self): + nets = [] + for net in list(set([rec.net_name for rec in self.test_records + if rec.net_name is not None])): + adjacent_nets = set() + for record in self.adjacency_records: + if record.net == net: + adjacent_nets = adjacent_nets.update(record.adjacent_nets) + elif net in record.adjacent_nets: + adjacent_nets.add(record.net) + nets.append(IPC356_Net(net, adjacent_nets)) + return nets + + @property + def components(self): + return list(set([rec.id for rec in self.test_records + if rec.id is not None and rec.id != 'VIA'])) + + @property + def vias(self): + return [rec.id for rec in self.test_records if rec.id == 'VIA'] + + @property + def outlines(self): + return [stmt for stmt in self.statements + if isinstance(stmt, IPC356_Outline)] + + @property + def adjacency_records(self): + return [record for record in self.statements + if isinstance(record, IPC356_Adjacency)] + + def render(self, ctx, layer='both', filename=None): + for p in self.primitives: + if layer == 'both' and p.layer in ('top', 'bottom', 'both'): + ctx.render(p) + elif layer == 'top' and p.layer in ('top', 'both'): + ctx.render(p) + elif layer == 'bottom' and p.layer in ('bottom', 'both'): + ctx.render(p) + if filename is not None: + ctx.dump(filename) + + +class IPC_D_356_Parser(object): + # TODO: Allow multi-line statements (e.g. Altium board edge) + + def __init__(self): + self.units = 'inch' + self.angle_units = 'degrees' + self.statements = [] + self.nnames = {} + + @property + def settings(self): + return FileSettings(units=self.units, angle_units=self.angle_units) + + def parse(self, filename): + with open(filename, 'rU') as f: + oldline = '' + for line in f: + # Check for existing multiline data... + if oldline != '': + if len(line) and line[0] == '0': + oldline = oldline.rstrip('\r\n') + line[3:].rstrip() + else: + self._parse_line(oldline) + oldline = line + else: + oldline = line + self._parse_line(oldline) + + return IPC_D_356(self.statements, self.settings, filename=filename) + + def _parse_line(self, line): + if not len(line): + return + if line[0] == 'C': + # Comment + self.statements.append(IPC356_Comment.from_line(line)) + + elif line[0] == 'P': + # Parameter + p = IPC356_Parameter.from_line(line) + if p.parameter == 'UNITS': + if p.value in ('CUST', 'CUST 0'): + self.units = 'inch' + self.angle_units = 'degrees' + elif p.value == 'CUST 1': + self.units = 'metric' + self.angle_units = 'degrees' + elif p.value == 'CUST 2': + self.units = 'inch' + self.angle_units = 'radians' + self.statements.append(p) + if _NNAME.match(p.parameter): + # Add to list of net name variables + self.nnames[p.parameter] = p.value + + elif line[0] == '9': + self.statements.append(IPC356_EndOfFile()) + + elif line[0:3] in ('317', '327', '367'): + # Test Record + record = IPC356_TestRecord.from_line(line, self.settings) + + # Substitute net name variables + net = record.net_name + if (_NNAME.match(net) and net in self.nnames.keys()): + record.net_name = self.nnames[record.net_name] + self.statements.append(record) + + elif line[0:3] == '378': + # Conductor + self.statements.append( + IPC356_Conductor.from_line( + line, self.settings)) + + elif line[0:3] == '379': + # Net Adjacency + self.statements.append(IPC356_Adjacency.from_line(line)) + + elif line[0:3] == '389': + # Outline + self.statements.append( + IPC356_Outline.from_line( + line, self.settings)) + + +class IPC356_Comment(object): + + @classmethod + def from_line(cls, line): + if line[0] != 'C': + raise ValueError('Not a valid comment statment') + comment = line[2:].strip() + return cls(comment) + + def __init__(self, comment): + self.comment = comment + + def __repr__(self): + return '<IPC-D-356 Comment: %s>' % self.comment + + +class IPC356_Parameter(object): + + @classmethod + def from_line(cls, line): + if line[0] != 'P': + raise ValueError('Not a valid parameter statment') + splitline = line[2:].split() + parameter = splitline[0].strip() + value = ' '.join(splitline[1:]).strip() + return cls(parameter, value) + + def __init__(self, parameter, value): + self.parameter = parameter + self.value = value + + def __repr__(self): + return '<IPC-D-356 Parameter: %s=%s>' % (self.parameter, self.value) + + +class IPC356_TestRecord(object): + + @classmethod + def from_line(cls, line, settings): + offset = 0 + units = settings.units + angle = settings.angle_units + feature_types = {'1': 'through-hole', '2': 'smt', + '3': 'tooling-feature', '4': 'tooling-hole'} + access = ['both', 'top', 'layer2', 'layer3', 'layer4', 'layer5', + 'layer6', 'layer7', 'bottom'] + record = {} + line = line.strip() + if line[0] != '3': + raise ValueError('Not a valid test record statment') + record['feature_type'] = feature_types[line[1]] + + end = len(line) - 1 if len(line) < 18 else 17 + record['net_name'] = line[3:end].strip() + + if len(line) >= 27 and line[26] != '-': + offset = line[26:].find('-') + offset = 0 if offset == -1 else offset + end = len(line) - 1 if len(line) < (27 + offset) else (26 + offset) + record['id'] = line[20:end].strip() + + end = len(line) - 1 if len(line) < (32 + offset) else (31 + offset) + record['pin'] = (line[27 + offset:end].strip() if line[27 + offset:end].strip() != '' + else None) + + record['location'] = 'middle' if line[31 + offset] == 'M' else 'end' + if line[32 + offset] == 'D': + end = len(line) - 1 if len(line) < (38 + offset) else (37 + offset) + dia = int(line[33 + offset:end].strip()) + record['hole_diameter'] = (dia * 0.0001 if units == 'inch' + else dia * 0.001) + if len(line) >= (38 + offset): + record['plated'] = (line[37 + offset] == 'P') + + if len(line) >= (40 + offset): + end = len(line) - 1 if len(line) < (42 + offset) else (41 + offset) + record['access'] = access[int(line[39 + offset:end])] + + if len(line) >= (43 + offset): + end = len(line) - 1 if len(line) < (50 + offset) else (49 + offset) + coord = int(line[42 + offset:end].strip()) + record['x_coord'] = (coord * 0.0001 if units == 'inch' + else coord * 0.001) + + if len(line) >= (51 + offset): + end = len(line) - 1 if len(line) < (58 + offset) else (57 + offset) + coord = int(line[50 + offset:end].strip()) + record['y_coord'] = (coord * 0.0001 if units == 'inch' + else coord * 0.001) + + if len(line) >= (59 + offset): + end = len(line) - 1 if len(line) < (63 + offset) else (62 + offset) + dim = line[58 + offset:end].strip() + if dim != '': + record['rect_x'] = (int(dim) * 0.0001 if units == 'inch' + else int(dim) * 0.001) + + if len(line) >= (64 + offset): + end = len(line) - 1 if len(line) < (68 + offset) else (67 + offset) + dim = line[63 + offset:end].strip() + if dim != '': + record['rect_y'] = (int(dim) * 0.0001 if units == 'inch' + else int(dim) * 0.001) + + if len(line) >= (69 + offset): + end = len(line) - 1 if len(line) < (72 + offset) else (71 + offset) + rot = line[68 + offset:end].strip() + if rot != '': + record['rect_rotation'] = (int(rot) if angle == 'degrees' + else math.degrees(rot)) + + if len(line) >= (74 + offset): + end = 74 + offset + sm_info = line[73 + offset:end].strip() + record['soldermask_info'] = _SM_FIELD.get(sm_info) + + if len(line) >= (76 + offset): + end = len(line) - 1 if len(line) < (80 + offset) else 79 + offset + record['optional_info'] = line[75 + offset:end] + + return cls(**record) + + def __init__(self, **kwargs): + for key in kwargs: + setattr(self, key, kwargs[key]) + + def __repr__(self): + return '<IPC-D-356 %s Test Record: %s>' % (self.net_name, + self.feature_type) + + +class IPC356_Outline(object): + + @classmethod + def from_line(cls, line, settings): + type = line[3:17].strip() + scale = 0.0001 if settings.units == 'inch' else 0.001 + points = [] + x = 0 + y = 0 + coord_strings = line.strip().split()[1:] + for coord in coord_strings: + coord_dict = _COORD.match(coord).groupdict() + x = int(coord_dict['x']) if coord_dict['x'] is not '' else x + y = int(coord_dict['y']) if coord_dict['y'] is not '' else y + points.append((x * scale, y * scale)) + return cls(type, points) + + def __init__(self, type, points): + self.type = type + self.points = points + + def __repr__(self): + return '<IPC-D-356 %s Outline Definition>' % self.type + + +class IPC356_Conductor(object): + + @classmethod + def from_line(cls, line, settings): + if line[0:3] != '378': + raise ValueError('Not a valid IPC-D-356 Conductor statement') + + scale = 0.0001 if settings.units == 'inch' else 0.001 + net_name = line[3:17].strip() + layer = int(line[19:21]) + + # Parse out aperture definiting + raw_aperture = line[22:].split()[0] + aperture_dict = _COORD.match(raw_aperture).groupdict() + x = 0 + y = 0 + x = int(aperture_dict['x']) * \ + scale if aperture_dict['x'] is not '' else None + y = int(aperture_dict['y']) * \ + scale if aperture_dict['y'] is not '' else None + aperture = (x, y) + + # Parse out conductor shapes + shapes = [] + coord_list = ' '.join(line[22:].split()[1:]) + raw_shapes = coord_list.split('*') + for rshape in raw_shapes: + x = 0 + y = 0 + shape = [] + coords = rshape.split() + for coord in coords: + coord_dict = _COORD.match(coord).groupdict() + x = int(coord_dict['x']) if coord_dict['x'] is not '' else x + y = int(coord_dict['y']) if coord_dict['y'] is not '' else y + shape.append((x * scale, y * scale)) + shapes.append(tuple(shape)) + return cls(net_name, layer, aperture, tuple(shapes)) + + def __init__(self, net_name, layer, aperture, shapes): + self.net_name = net_name + self.layer = layer + self.aperture = aperture + self.shapes = shapes + + def __repr__(self): + return '<IPC-D-356 %s Conductor Record>' % self.net_name + + +class IPC356_Adjacency(object): + + @classmethod + def from_line(cls, line): + if line[0:3] != '379': + raise ValueError('Not a valid IPC-D-356 Conductor statement') + nets = line[3:].strip().split() + + return cls(nets[0], nets[1:]) + + def __init__(self, net, adjacent_nets): + self.net = net + self.adjacent_nets = adjacent_nets + + def __repr__(self): + return '<IPC-D-356 %s Adjacency Record>' % self.net + + +class IPC356_EndOfFile(object): + + def __init__(self): + pass + + def to_netlist(self): + return '999' + + def __repr__(self): + return '<IPC-D-356 EOF>' + + +class IPC356_Net(object): + + def __init__(self, name, adjacent_nets): + self.name = name + self.adjacent_nets = set( + adjacent_nets) if adjacent_nets is not None else set() + + def __repr__(self): + return '<IPC-D-356 Net %s>' % self.name |