diff options
Diffstat (limited to 'gerber/excellon.py')
| -rwxr-xr-x | gerber/excellon.py | 160 |
1 files changed, 132 insertions, 28 deletions
diff --git a/gerber/excellon.py b/gerber/excellon.py index 0637b23..72cf75c 100755 --- a/gerber/excellon.py +++ b/gerber/excellon.py @@ -34,7 +34,7 @@ except(ImportError): from .excellon_statements import *
from .excellon_tool import ExcellonToolDefinitionParser
from .cam import CamFile, FileSettings
-from .primitives import Drill
+from .primitives import Drill, Slot
from .utils import inch, metric
@@ -93,6 +93,55 @@ class DrillHit(object): if self.tool.units == 'inch':
self.tool.to_metric()
self.position = tuple(map(metric, self.position))
+
+ @property
+ def bounding_box(self):
+ position = self.position
+ radius = self.tool.diameter / 2.
+
+ min_x = position[0] - radius
+ max_x = position[0] + radius
+ min_y = position[1] - radius
+ max_y = position[1] + radius
+ return ((min_x, max_x), (min_y, max_y))
+
+
+class DrillSlot(object):
+ """
+ A slot is created between two points. The way the slot is created depends on the statement used to create it
+ """
+
+ TYPE_ROUT = 1
+ TYPE_G85 = 2
+
+ def __init__(self, tool, start, end, slot_type):
+ self.tool = tool
+ self.start = start
+ self.end = end
+ self.slot_type = slot_type
+
+ def to_inch(self):
+ if self.tool.units == 'metric':
+ self.tool.to_inch()
+ self.start = tuple(map(inch, self.start))
+ self.end = tuple(map(inch, self.end))
+
+ def to_metric(self):
+ if self.tool.units == 'inch':
+ self.tool.to_metric()
+ self.start = tuple(map(metric, self.start))
+ self.end = tuple(map(metric, self.end))
+
+ @property
+ def bounding_box(self):
+ start = self.start
+ end = self.end
+ radius = self.tool.diameter / 2.
+ min_x = min(start[0], end[0]) - radius
+ max_x = max(start[0], end[0]) + radius
+ min_y = min(start[1], end[1]) - radius
+ max_y = max(start[1], end[1]) + radius
+ return ((min_x, max_x), (min_y, max_y))
class ExcellonFile(CamFile):
@@ -131,7 +180,17 @@ class ExcellonFile(CamFile): @property
def primitives(self):
- return [Drill(hit.position, hit.tool.diameter, hit, units=self.settings.units) for hit in self.hits]
+
+ primitives = []
+ for hit in self.hits:
+ if isinstance(hit, DrillHit):
+ primitives.append(Drill(hit.position, hit.tool.diameter, hit, units=self.settings.units))
+ elif isinstance(hit, DrillSlot):
+ primitives.append(Slot(hit.start, hit.end, hit.tool.diameter, hit, units=self.settings.units))
+ else:
+ raise ValueError('Unknown hit type')
+
+ return primitives
@property
@@ -139,12 +198,11 @@ class ExcellonFile(CamFile): xmin = ymin = 100000000000
xmax = ymax = -100000000000
for hit in self.hits:
- radius = hit.tool.diameter / 2.
- x, y = hit.position
- xmin = min(x - radius, xmin)
- xmax = max(x + radius, xmax)
- ymin = min(y - radius, ymin)
- ymax = max(y + radius, ymax)
+ bbox = hit.bounding_box
+ xmin = min(bbox[0][0], xmin)
+ xmax = max(bbox[0][1], xmax)
+ ymin = min(bbox[1][0], ymin)
+ ymax = max(bbox[1][1], ymax)
return ((xmin, xmax), (ymin, ymax))
def report(self, filename=None):
@@ -291,6 +349,7 @@ class ExcellonParser(object): self.hits = []
self.active_tool = None
self.pos = [0., 0.]
+ self.drill_down = False
# Default for lated is None, which means we don't know
self.plated = ExcellonTool.PLATED_UNKNOWN
if settings is not None:
@@ -399,12 +458,15 @@ class ExcellonParser(object): elif line[:3] == 'M15':
self.statements.append(ZAxisRoutPositionStmt())
+ self.drill_down = True
elif line[:3] == 'M16':
self.statements.append(RetractWithClampingStmt())
+ self.drill_down = False
elif line[:3] == 'M17':
self.statements.append(RetractWithoutClampingStmt())
+ self.drill_down = False
elif line[:3] == 'M30':
stmt = EndOfProgramStmt.from_excellon(line, self._settings())
@@ -437,6 +499,9 @@ class ExcellonParser(object): stmt = CoordinateStmt.from_excellon(line[3:], self._settings())
stmt.mode = self.state
+
+ # The start position is where we were before the rout command
+ start = (self.pos[0], self.pos[1])
x = stmt.x
y = stmt.y
@@ -451,9 +516,20 @@ class ExcellonParser(object): self.pos[0] += x
if y is not None:
self.pos[1] += y
-
+
+ # Our ending position
+ end = (self.pos[0], self.pos[1])
+
+ if self.drill_down:
+ if not self.active_tool:
+ self.active_tool = self._get_tool(1)
+
+ self.hits.append(DrillSlot(self.active_tool, start, end, DrillSlot.TYPE_ROUT))
+ self.active_tool._hit()
+
elif line[:3] == 'G05':
self.statements.append(DrillModeStmt())
+ self.drill_down = False
self.state = 'DRILL'
elif 'INCH' in line or 'METRIC' in line:
@@ -545,26 +621,54 @@ class ExcellonParser(object): self.active_tool._hit()
elif line[0] in ['X', 'Y']:
- stmt = CoordinateStmt.from_excellon(line, self._settings())
- x = stmt.x
- y = stmt.y
- self.statements.append(stmt)
- if self.notation == 'absolute':
- if x is not None:
- self.pos[0] = x
- if y is not None:
- self.pos[1] = y
- else:
- if x is not None:
- self.pos[0] += x
- if y is not None:
- self.pos[1] += y
- if self.state == 'DRILL':
- if not self.active_tool:
- self.active_tool = self._get_tool(1)
+ if 'G85' in line:
+ stmt = SlotStmt.from_excellon(line, self._settings())
- self.hits.append(DrillHit(self.active_tool, tuple(self.pos)))
- self.active_tool._hit()
+ # I don't know if this is actually correct, but it makes sense that this is where the tool would end
+ x = stmt.x_end
+ y = stmt.y_end
+
+ self.statements.append(stmt)
+
+ if self.notation == 'absolute':
+ if x is not None:
+ self.pos[0] = x
+ if y is not None:
+ self.pos[1] = y
+ else:
+ if x is not None:
+ self.pos[0] += x
+ if y is not None:
+ self.pos[1] += y
+
+ if self.state == 'DRILL':
+ if not self.active_tool:
+ self.active_tool = self._get_tool(1)
+
+ self.hits.append(DrillSlot(self.active_tool, (stmt.x_start, stmt.y_start), (stmt.x_end, stmt.y_end), DrillSlot.TYPE_G85))
+ self.active_tool._hit()
+ else:
+ stmt = CoordinateStmt.from_excellon(line, self._settings())
+ x = stmt.x
+ y = stmt.y
+ self.statements.append(stmt)
+ if self.notation == 'absolute':
+ if x is not None:
+ self.pos[0] = x
+ if y is not None:
+ self.pos[1] = y
+ else:
+ if x is not None:
+ self.pos[0] += x
+ if y is not None:
+ self.pos[1] += y
+
+ if self.state == 'DRILL':
+ if not self.active_tool:
+ self.active_tool = self._get_tool(1)
+
+ self.hits.append(DrillHit(self.active_tool, tuple(self.pos)))
+ self.active_tool._hit()
else:
self.statements.append(UnknownStmt.from_excellon(line))
|