diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/Makefile | 177 | ||||
| -rw-r--r-- | doc/make.bat | 242 | ||||
| -rw-r--r-- | doc/source/conf.py | 260 | ||||
| -rw-r--r-- | doc/source/index.rst | 29 |
4 files changed, 708 insertions, 0 deletions
diff --git a/doc/Makefile b/doc/Makefile new file mode 100644 index 0000000..5c6b560 --- /dev/null +++ b/doc/Makefile @@ -0,0 +1,177 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = build + +# User-friendly check for sphinx-build +ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) +$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) +endif + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext + +help: + @echo "Please use \`make <target>' where <target> is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " xml to make Docutils-native XML files" + @echo " pseudoxml to make pseudoxml-XML files for display purposes" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + +clean: + rm -rf $(BUILDDIR)/* + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/GerberTools.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/GerberTools.qhc" + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $$HOME/.local/share/devhelp/GerberTools" + @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/GerberTools" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +latexpdfja: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through platex and dvipdfmx..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." + +xml: + $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml + @echo + @echo "Build finished. The XML files are in $(BUILDDIR)/xml." + +pseudoxml: + $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml + @echo + @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." diff --git a/doc/make.bat b/doc/make.bat new file mode 100644 index 0000000..2860659 --- /dev/null +++ b/doc/make.bat @@ -0,0 +1,242 @@ +@ECHO OFF
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+ set SPHINXBUILD=sphinx-build
+)
+set BUILDDIR=build
+set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% source
+set I18NSPHINXOPTS=%SPHINXOPTS% source
+if NOT "%PAPER%" == "" (
+ set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
+ set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
+)
+
+if "%1" == "" goto help
+
+if "%1" == "help" (
+ :help
+ echo.Please use `make ^<target^>` where ^<target^> is one of
+ echo. html to make standalone HTML files
+ echo. dirhtml to make HTML files named index.html in directories
+ echo. singlehtml to make a single large HTML file
+ echo. pickle to make pickle files
+ echo. json to make JSON files
+ echo. htmlhelp to make HTML files and a HTML help project
+ echo. qthelp to make HTML files and a qthelp project
+ echo. devhelp to make HTML files and a Devhelp project
+ echo. epub to make an epub
+ echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
+ echo. text to make text files
+ echo. man to make manual pages
+ echo. texinfo to make Texinfo files
+ echo. gettext to make PO message catalogs
+ echo. changes to make an overview over all changed/added/deprecated items
+ echo. xml to make Docutils-native XML files
+ echo. pseudoxml to make pseudoxml-XML files for display purposes
+ echo. linkcheck to check all external links for integrity
+ echo. doctest to run all doctests embedded in the documentation if enabled
+ goto end
+)
+
+if "%1" == "clean" (
+ for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
+ del /q /s %BUILDDIR%\*
+ goto end
+)
+
+
+%SPHINXBUILD% 2> nul
+if errorlevel 9009 (
+ echo.
+ echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+ echo.installed, then set the SPHINXBUILD environment variable to point
+ echo.to the full path of the 'sphinx-build' executable. Alternatively you
+ echo.may add the Sphinx directory to PATH.
+ echo.
+ echo.If you don't have Sphinx installed, grab it from
+ echo.http://sphinx-doc.org/
+ exit /b 1
+)
+
+if "%1" == "html" (
+ %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The HTML pages are in %BUILDDIR%/html.
+ goto end
+)
+
+if "%1" == "dirhtml" (
+ %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
+ goto end
+)
+
+if "%1" == "singlehtml" (
+ %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
+ goto end
+)
+
+if "%1" == "pickle" (
+ %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished; now you can process the pickle files.
+ goto end
+)
+
+if "%1" == "json" (
+ %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished; now you can process the JSON files.
+ goto end
+)
+
+if "%1" == "htmlhelp" (
+ %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished; now you can run HTML Help Workshop with the ^
+.hhp project file in %BUILDDIR%/htmlhelp.
+ goto end
+)
+
+if "%1" == "qthelp" (
+ %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished; now you can run "qcollectiongenerator" with the ^
+.qhcp project file in %BUILDDIR%/qthelp, like this:
+ echo.^> qcollectiongenerator %BUILDDIR%\qthelp\GerberTools.qhcp
+ echo.To view the help file:
+ echo.^> assistant -collectionFile %BUILDDIR%\qthelp\GerberTools.ghc
+ goto end
+)
+
+if "%1" == "devhelp" (
+ %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished.
+ goto end
+)
+
+if "%1" == "epub" (
+ %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The epub file is in %BUILDDIR%/epub.
+ goto end
+)
+
+if "%1" == "latex" (
+ %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
+ goto end
+)
+
+if "%1" == "latexpdf" (
+ %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+ cd %BUILDDIR%/latex
+ make all-pdf
+ cd %BUILDDIR%/..
+ echo.
+ echo.Build finished; the PDF files are in %BUILDDIR%/latex.
+ goto end
+)
+
+if "%1" == "latexpdfja" (
+ %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+ cd %BUILDDIR%/latex
+ make all-pdf-ja
+ cd %BUILDDIR%/..
+ echo.
+ echo.Build finished; the PDF files are in %BUILDDIR%/latex.
+ goto end
+)
+
+if "%1" == "text" (
+ %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The text files are in %BUILDDIR%/text.
+ goto end
+)
+
+if "%1" == "man" (
+ %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The manual pages are in %BUILDDIR%/man.
+ goto end
+)
+
+if "%1" == "texinfo" (
+ %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
+ goto end
+)
+
+if "%1" == "gettext" (
+ %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
+ goto end
+)
+
+if "%1" == "changes" (
+ %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.The overview file is in %BUILDDIR%/changes.
+ goto end
+)
+
+if "%1" == "linkcheck" (
+ %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Link check complete; look for any errors in the above output ^
+or in %BUILDDIR%/linkcheck/output.txt.
+ goto end
+)
+
+if "%1" == "doctest" (
+ %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Testing of doctests in the sources finished, look at the ^
+results in %BUILDDIR%/doctest/output.txt.
+ goto end
+)
+
+if "%1" == "xml" (
+ %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The XML files are in %BUILDDIR%/xml.
+ goto end
+)
+
+if "%1" == "pseudoxml" (
+ %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
+ goto end
+)
+
+:end
diff --git a/doc/source/conf.py b/doc/source/conf.py new file mode 100644 index 0000000..bf45678 --- /dev/null +++ b/doc/source/conf.py @@ -0,0 +1,260 @@ +# -*- coding: utf-8 -*- +# +# Gerber Tools documentation build configuration file, created by +# sphinx-quickstart on Sun Sep 28 18:16:46 2014. +# +# This file is execfile()d with the current directory set to its +# containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys +import os + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +sys.path.insert(0, os.path.abspath('../../')) + +# -- General configuration ------------------------------------------------ + +# If your documentation needs a minimal Sphinx version, state it here. +#needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = [ + 'sphinx.ext.autodoc', +] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix of source filenames. +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'Gerber Tools' +copyright = u'2014, Hamilton Kibbe' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '0.1' +# The full version, including alpha/beta/rc tags. +release = '0.1' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +#language = None + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = [] + +# The reST default role (used for this markup: `text`) to use for all +# documents. +#default_role = None + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + +# If true, keep warnings as "system message" paragraphs in the built documents. +#keep_warnings = False + + +# -- Options for HTML output ---------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. +html_theme = 'default' + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# "<project> v<release> documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# Add any extra paths that contain custom files (such as robots.txt or +# .htaccess) here, relative to this directory. These files are copied +# directly to the root of the documentation. +#html_extra_path = [] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a <link> tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Output file base name for HTML help builder. +htmlhelp_basename = 'GerberToolsdoc' + + +# -- Options for LaTeX output --------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +#'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +#'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +#'preamble': '', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, +# author, documentclass [howto, manual, or own class]). +latex_documents = [ + ('index', 'GerberTools.tex', u'Gerber Tools Documentation', + u'Hamilton Kibbe', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output --------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + ('index', 'gerbertools', u'Gerber Tools Documentation', + [u'Hamilton Kibbe'], 1) +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------- + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + ('index', 'GerberTools', u'Gerber Tools Documentation', + u'Hamilton Kibbe', 'GerberTools', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' + +# If true, do not generate a @detailmenu in the "Top" node's menu. +#texinfo_no_detailmenu = False diff --git a/doc/source/index.rst b/doc/source/index.rst new file mode 100644 index 0000000..ac28b5b --- /dev/null +++ b/doc/source/index.rst @@ -0,0 +1,29 @@ +.. Gerber Tools documentation master file, created by + sphinx-quickstart on Sun Sep 28 18:16:46 2014. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to Gerber Tools's documentation! +======================================== + +Contents: + +.. toctree:: + :maxdepth: 2 + +.. automodule:: gerber.gerber + :members: + +.. automodule:: gerber.statements + :members: + +.. automodule:: gerber.utils + :members: + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` + |