diff options
Diffstat (limited to 'doc')
-rw-r--r-- | doc/Makefile | 177 | ||||
-rw-r--r-- | doc/make.bat | 242 | ||||
-rw-r--r-- | doc/source/conf.py | 262 | ||||
-rw-r--r-- | doc/source/documentation/excellon.rst | 42 | ||||
-rw-r--r-- | doc/source/documentation/index.rst | 11 | ||||
-rw-r--r-- | doc/source/documentation/render.rst | 11 | ||||
-rw-r--r-- | doc/source/documentation/rs274x.rst | 37 | ||||
-rw-r--r-- | doc/source/index.rst | 23 | ||||
-rw-r--r-- | doc/source/intro.rst | 19 |
9 files changed, 824 insertions, 0 deletions
diff --git a/doc/Makefile b/doc/Makefile new file mode 100644 index 0000000..5c6b560 --- /dev/null +++ b/doc/Makefile @@ -0,0 +1,177 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = build + +# User-friendly check for sphinx-build +ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) +$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) +endif + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext + +help: + @echo "Please use \`make <target>' where <target> is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " xml to make Docutils-native XML files" + @echo " pseudoxml to make pseudoxml-XML files for display purposes" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + +clean: + rm -rf $(BUILDDIR)/* + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/GerberTools.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/GerberTools.qhc" + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $$HOME/.local/share/devhelp/GerberTools" + @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/GerberTools" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +latexpdfja: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through platex and dvipdfmx..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." + +xml: + $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml + @echo + @echo "Build finished. The XML files are in $(BUILDDIR)/xml." + +pseudoxml: + $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml + @echo + @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." diff --git a/doc/make.bat b/doc/make.bat new file mode 100644 index 0000000..2860659 --- /dev/null +++ b/doc/make.bat @@ -0,0 +1,242 @@ +@ECHO OFF
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+ set SPHINXBUILD=sphinx-build
+)
+set BUILDDIR=build
+set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% source
+set I18NSPHINXOPTS=%SPHINXOPTS% source
+if NOT "%PAPER%" == "" (
+ set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
+ set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
+)
+
+if "%1" == "" goto help
+
+if "%1" == "help" (
+ :help
+ echo.Please use `make ^<target^>` where ^<target^> is one of
+ echo. html to make standalone HTML files
+ echo. dirhtml to make HTML files named index.html in directories
+ echo. singlehtml to make a single large HTML file
+ echo. pickle to make pickle files
+ echo. json to make JSON files
+ echo. htmlhelp to make HTML files and a HTML help project
+ echo. qthelp to make HTML files and a qthelp project
+ echo. devhelp to make HTML files and a Devhelp project
+ echo. epub to make an epub
+ echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
+ echo. text to make text files
+ echo. man to make manual pages
+ echo. texinfo to make Texinfo files
+ echo. gettext to make PO message catalogs
+ echo. changes to make an overview over all changed/added/deprecated items
+ echo. xml to make Docutils-native XML files
+ echo. pseudoxml to make pseudoxml-XML files for display purposes
+ echo. linkcheck to check all external links for integrity
+ echo. doctest to run all doctests embedded in the documentation if enabled
+ goto end
+)
+
+if "%1" == "clean" (
+ for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
+ del /q /s %BUILDDIR%\*
+ goto end
+)
+
+
+%SPHINXBUILD% 2> nul
+if errorlevel 9009 (
+ echo.
+ echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+ echo.installed, then set the SPHINXBUILD environment variable to point
+ echo.to the full path of the 'sphinx-build' executable. Alternatively you
+ echo.may add the Sphinx directory to PATH.
+ echo.
+ echo.If you don't have Sphinx installed, grab it from
+ echo.http://sphinx-doc.org/
+ exit /b 1
+)
+
+if "%1" == "html" (
+ %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The HTML pages are in %BUILDDIR%/html.
+ goto end
+)
+
+if "%1" == "dirhtml" (
+ %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
+ goto end
+)
+
+if "%1" == "singlehtml" (
+ %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
+ goto end
+)
+
+if "%1" == "pickle" (
+ %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished; now you can process the pickle files.
+ goto end
+)
+
+if "%1" == "json" (
+ %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished; now you can process the JSON files.
+ goto end
+)
+
+if "%1" == "htmlhelp" (
+ %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished; now you can run HTML Help Workshop with the ^
+.hhp project file in %BUILDDIR%/htmlhelp.
+ goto end
+)
+
+if "%1" == "qthelp" (
+ %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished; now you can run "qcollectiongenerator" with the ^
+.qhcp project file in %BUILDDIR%/qthelp, like this:
+ echo.^> qcollectiongenerator %BUILDDIR%\qthelp\GerberTools.qhcp
+ echo.To view the help file:
+ echo.^> assistant -collectionFile %BUILDDIR%\qthelp\GerberTools.ghc
+ goto end
+)
+
+if "%1" == "devhelp" (
+ %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished.
+ goto end
+)
+
+if "%1" == "epub" (
+ %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The epub file is in %BUILDDIR%/epub.
+ goto end
+)
+
+if "%1" == "latex" (
+ %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
+ goto end
+)
+
+if "%1" == "latexpdf" (
+ %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+ cd %BUILDDIR%/latex
+ make all-pdf
+ cd %BUILDDIR%/..
+ echo.
+ echo.Build finished; the PDF files are in %BUILDDIR%/latex.
+ goto end
+)
+
+if "%1" == "latexpdfja" (
+ %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+ cd %BUILDDIR%/latex
+ make all-pdf-ja
+ cd %BUILDDIR%/..
+ echo.
+ echo.Build finished; the PDF files are in %BUILDDIR%/latex.
+ goto end
+)
+
+if "%1" == "text" (
+ %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The text files are in %BUILDDIR%/text.
+ goto end
+)
+
+if "%1" == "man" (
+ %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The manual pages are in %BUILDDIR%/man.
+ goto end
+)
+
+if "%1" == "texinfo" (
+ %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
+ goto end
+)
+
+if "%1" == "gettext" (
+ %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
+ goto end
+)
+
+if "%1" == "changes" (
+ %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.The overview file is in %BUILDDIR%/changes.
+ goto end
+)
+
+if "%1" == "linkcheck" (
+ %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Link check complete; look for any errors in the above output ^
+or in %BUILDDIR%/linkcheck/output.txt.
+ goto end
+)
+
+if "%1" == "doctest" (
+ %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Testing of doctests in the sources finished, look at the ^
+results in %BUILDDIR%/doctest/output.txt.
+ goto end
+)
+
+if "%1" == "xml" (
+ %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The XML files are in %BUILDDIR%/xml.
+ goto end
+)
+
+if "%1" == "pseudoxml" (
+ %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
+ if errorlevel 1 exit /b 1
+ echo.
+ echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
+ goto end
+)
+
+:end
diff --git a/doc/source/conf.py b/doc/source/conf.py new file mode 100644 index 0000000..a118546 --- /dev/null +++ b/doc/source/conf.py @@ -0,0 +1,262 @@ +# -*- coding: utf-8 -*-
+#
+# Gerber Tools documentation build configuration file, created by
+# sphinx-quickstart on Sun Sep 28 18:16:46 2014.
+#
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys
+import os
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+sys.path.insert(0, os.path.abspath('../../'))
+
+# -- General configuration ------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+ 'sphinx.ext.autodoc',
+ 'sphinx.ext.autosummary',
+ 'numpydoc',
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The encoding of source files.
+#source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'Gerber Tools'
+copyright = u'2014, Hamilton Kibbe'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = '0.1'
+# The full version, including alpha/beta/rc tags.
+release = '0.1'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#today = ''
+# Else, today_fmt is used as the format for a strftime call.
+#today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = []
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+#default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+#modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+#keep_warnings = False
+
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages. See the documentation for
+# a list of builtin themes.
+html_theme = 'default'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further. For a list of options available for each theme, see the
+# documentation.
+#html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+#html_theme_path = []
+
+# The name for this set of Sphinx documents. If None, it defaults to
+# "<project> v<release> documentation".
+#html_title = None
+
+# A shorter title for the navigation bar. Default is the same as html_title.
+#html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# Add any extra paths that contain custom files (such as robots.txt or
+# .htaccess) here, relative to this directory. These files are copied
+# directly to the root of the documentation.
+#html_extra_path = []
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+#html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+#html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#html_additional_pages = {}
+
+# If false, no module index is generated.
+#html_domain_indices = True
+
+# If false, no index is generated.
+#html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+#html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+#html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+#html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it. The value of this option must be the
+# base URL from which the finished HTML is served.
+#html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+#html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'GerberToolsdoc'
+
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+# The paper size ('letterpaper' or 'a4paper').
+#'papersize': 'letterpaper',
+
+# The font size ('10pt', '11pt' or '12pt').
+#'pointsize': '10pt',
+
+# Additional stuff for the LaTeX preamble.
+#'preamble': '',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+# author, documentclass [howto, manual, or own class]).
+latex_documents = [
+ ('index', 'GerberTools.tex', u'Gerber Tools Documentation',
+ u'Hamilton Kibbe', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#latex_use_parts = False
+
+# If true, show page references after internal links.
+#latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+#latex_appendices = []
+
+# If false, no module index is generated.
+#latex_domain_indices = True
+
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+ ('index', 'gerbertools', u'Gerber Tools Documentation',
+ [u'Hamilton Kibbe'], 1)
+]
+
+# If true, show URL addresses after external links.
+#man_show_urls = False
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+# dir menu entry, description, category)
+texinfo_documents = [
+ ('index', 'GerberTools', u'Gerber Tools Documentation',
+ u'Hamilton Kibbe', 'GerberTools', 'One line description of project.',
+ 'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+#texinfo_appendices = []
+
+# If false, no module index is generated.
+#texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#texinfo_show_urls = 'footnote'
+
+# If true, do not generate a @detailmenu in the "Top" node's menu.
+#texinfo_no_detailmenu = False
diff --git a/doc/source/documentation/excellon.rst b/doc/source/documentation/excellon.rst new file mode 100644 index 0000000..7ac3b39 --- /dev/null +++ b/doc/source/documentation/excellon.rst @@ -0,0 +1,42 @@ +:mod:`excellon` --- Excellon file handling +============================================== + +.. module:: excellon + :synopsis: Functions and classes for handling Excellon files +.. sectionauthor:: Hamilton Kibbe <ham@hamiltonkib.be> + + +The Excellon format is the most common format for exporting PCB drill +information. The Excellon format is used to program CNC drilling macines for +drilling holes in PCBs. As such, excellon files are sometimes refererred to as +NC-drill files. The Excellon format reference is available +`here <http://www.excellon.com/manuals/program.htm>`_. The :mod:`excellon` +submodule implements calsses to read and write excellon files without having +to know the precise details of the format. + +The :mod:`excellon` submodule's :func:`read` function serves as a +simple interface for parsing excellon files. The :class:`ExcellonFile` class +stores all the information contained in an Excellon file allowing the file to +be analyzed, modified, and updated. The :class:`ExcellonParser` class is used +in the background for parsing RS-274X files. + +.. _excellon-contents: + +Functions +--------- +The :mod:`excellon` module defines the following functions: + +.. autofunction:: gerber.excellon.read + + +Classes +------- +The :mod:`excellon` module defines the following classes: + +.. autoclass:: gerber.excellon.ExcellonFile + :members: + + +.. autoclass:: gerber.excellon.ExcellonParser + :members: +
\ No newline at end of file diff --git a/doc/source/documentation/index.rst b/doc/source/documentation/index.rst new file mode 100644 index 0000000..3d8241a --- /dev/null +++ b/doc/source/documentation/index.rst @@ -0,0 +1,11 @@ +Gerber Tools Reference +====================== + +.. toctree:: + :maxdepth: 2 + + Gerber (RS-274X) Files <rs274x> + Excellon Files <excellon> + Rendering <render> + + diff --git a/doc/source/documentation/render.rst b/doc/source/documentation/render.rst new file mode 100644 index 0000000..324ef71 --- /dev/null +++ b/doc/source/documentation/render.rst @@ -0,0 +1,11 @@ +:mod:`render` --- Gerber file Rendering +============================================== + +.. module:: render + :synopsis: Functions and classes for handling Excellon files +.. sectionauthor:: Hamilton Kibbe <ham@hamiltonkib.be> + +Render Module +------------- +.. automodule:: gerber.render.render + :members: diff --git a/doc/source/documentation/rs274x.rst b/doc/source/documentation/rs274x.rst new file mode 100644 index 0000000..bc99519 --- /dev/null +++ b/doc/source/documentation/rs274x.rst @@ -0,0 +1,37 @@ +:mod:`rs274x` --- RS-274X file handling +============================================== + +.. module:: rs274x + :synopsis: Functions and classes for handling RS-274X files +.. sectionauthor:: Hamilton Kibbe <ham@hamiltonkib.be> + + +The RS-274X (Gerber) format is the most common format for exporting PCB +artwork. The Specification is published by Ucamco and is available +`here <http://www.ucamco.com/files/downloads/file/81/the_gerber_file_format_specification.pdf>`_. +The :mod:`rs274x` submodule implements calsses to read and write +RS-274X files without having to know the precise details of the format. + +The :mod:`rs274x` submodule's :func:`read` function serves as a +simple interface for parsing gerber files. The :class:`GerberFile` class +stores all the information contained in a gerber file allowing the file to be +analyzed, modified, and updated. The :class:`GerberParser` class is used in +the background for parsing RS-274X files. + +.. _gerber-contents: + +Functions +--------- +The :mod:`rs274x` module defines the following functions: + +.. autofunction:: gerber.rs274x.read + +Classes +------- +The :mod:`rs274x` module defines the following classes: + +.. autoclass:: gerber.rs274x.GerberFile + :members: + +.. autoclass:: gerber.rs274x.GerberParser + :members:
\ No newline at end of file diff --git a/doc/source/index.rst b/doc/source/index.rst new file mode 100644 index 0000000..aec8b48 --- /dev/null +++ b/doc/source/index.rst @@ -0,0 +1,23 @@ +.. Gerber Tools documentation master file, created by
+ sphinx-quickstart on Sun Sep 28 18:16:46 2014.
+ You can adapt this file completely to your liking, but it should at least
+ contain the root `toctree` directive.
+
+Gerber-Tools!
+========================================
+
+Contents:
+
+.. toctree::
+ :maxdepth: 1
+
+ intro
+ documentation/index
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+
diff --git a/doc/source/intro.rst b/doc/source/intro.rst new file mode 100644 index 0000000..1982fc8 --- /dev/null +++ b/doc/source/intro.rst @@ -0,0 +1,19 @@ +Gerber Tools Intro +================== + +PCB CAM (Gerber) Files +------------ + +PCB design files (artwork) are most often stored in `Gerber` files. This is +a generic term that may refer to `RS-274X (Gerber) <http://en.wikipedia.org/wiki/Gerber_format>`_, +`ODB++ <http://en.wikipedia.org/wiki/ODB%2B%2B>`_, or `Excellon <http://en.wikipedia.org/wiki/Excellon_format>`_ +files. + + +Gerber-Tools +------------ + +The gerber-tools module provides tools for working with and rendering Gerber +and Excellon files. + + |