Fix rotation bugs, all tests run through

1 files changed, 163 insertions, 48 deletions

diff --git a/gerbonara/gerber/tests/test_rs274x.py b/gerbonara/gerber/tests/test_rs274x.py
index 28ee891..d91609f 100644
--- a/gerbonara/gerber/tests/test_rs274x.py
+++ b/gerbonara/gerber/tests/test_rs274x.py
@@ -4,22 +4,28 @@
 # Author: Hamilton Kibbe <ham@hamiltonkib.be>
 import os
 import re
-import pytest
+import math
 import functools
 import tempfile
 import shutil
 from argparse import Namespace
+from itertools import chain
 from pathlib import Path
 
+import pytest
+
 from ..rs274x import GerberFile
+from ..cam import FileSettings
 
 from .image_support import gerber_difference
 
 
+deg_to_rad = lambda a: a/180 * math.pi
+
 fail_dir = Path('gerbonara_test_failures')
 @pytest.fixture(scope='session', autouse=True)
 def clear_failure_dir(request):
-    for f in fail_dir.glob('*.gbr'):
+    for f in chain(fail_dir.glob('*.gbr'), fail_dir.glob('*.png')):
         f.unlink()
 
 reference_path = lambda reference: Path(__file__).parent / 'resources' / reference
@@ -42,61 +48,170 @@ def temp_files(request):
             shutil.copy(tmp_out_gbr.name, perm_path_gbr)
             shutil.copy(tmp_out_png.name, perm_path_png)
             print(f'Failing output saved to {perm_path_gbr}')
-            print(f'Difference image saved to {perm_path_png}')
             print(f'Reference file is {reference_path(request.node.funcargs["reference"])}')
+            print(f'Difference image saved to {perm_path_png}')
+            print(f'gerbv command line:')
+            print(f'gerbv {perm_path_gbr} {reference_path(request.node.funcargs["reference"])}')
+
+to_gerbv_svg_units = lambda val, unit='mm': val*72 if unit == 'inch' else val/25.4*72
+
+REFERENCE_FILES = [ l.strip() for l in '''
+    board_outline.GKO
+    example_outline_with_arcs.gbr
+    example_two_square_boxes.gbr
+    example_coincident_hole.gbr
+    example_cutin.gbr
+    example_cutin_multiple.gbr
+    example_flash_circle.gbr
+    example_flash_obround.gbr
+    example_flash_polygon.gbr
+    example_flash_rectangle.gbr
+    example_fully_coincident.gbr
+    example_guess_by_content.g0
+    example_holes_dont_clear.gbr
+    example_level_holes.gbr
+    example_not_overlapping_contour.gbr
+    example_not_overlapping_touching.gbr
+    example_overlapping_contour.gbr
+    example_overlapping_touching.gbr
+    example_simple_contour.gbr
+    example_single_contour_1.gbr
+    example_single_contour_2.gbr
+    example_single_contour_3.gbr
+    example_am_exposure_modifier.gbr
+    bottom_copper.GBL
+    bottom_mask.GBS
+    bottom_silk.GBO
+    eagle_files/copper_bottom_l4.gbr
+    eagle_files/copper_inner_l2.gbr
+    eagle_files/copper_inner_l3.gbr
+    eagle_files/copper_top_l1.gbr
+    eagle_files/profile.gbr
+    eagle_files/silkscreen_bottom.gbr
+    eagle_files/silkscreen_top.gbr
+    eagle_files/soldermask_bottom.gbr
+    eagle_files/soldermask_top.gbr
+    eagle_files/solderpaste_bottom.gbr
+    eagle_files/solderpaste_top.gbr
+    multiline_read.ger
+    test_fine_lines_x.gbr
+    test_fine_lines_y.gbr
+    top_copper.GTL
+    top_mask.GTS
+    top_silk.GTO
+'''.splitlines() if l ]
+
+MIN_REFERENCE_FILES = [
+    'example_two_square_boxes.gbr',
+    'example_outline_with_arcs.gbr',
+    'example_flash_circle.gbr',
+    'example_flash_polygon.gbr',
+    'example_flash_rectangle.gbr',
+    'example_simple_contour.gbr',
+    'example_am_exposure_modifier.gbr',
+    'bottom_copper.GBL',
+    'bottom_silk.GBO',
+    'eagle_files/copper_bottom_l4.gbr'
+    ]
 
 @pytest.mark.filterwarnings('ignore:Deprecated.*statement found.*:DeprecationWarning')
 @pytest.mark.filterwarnings('ignore::SyntaxWarning')
-@pytest.mark.parametrize('reference', [ l.strip() for l in '''
-board_outline.GKO
-example_outline_with_arcs.gbr
-example_two_square_boxes.gbr
-example_coincident_hole.gbr
-example_cutin.gbr
-example_cutin_multiple.gbr
-example_flash_circle.gbr
-example_flash_obround.gbr
-example_flash_polygon.gbr
-example_flash_rectangle.gbr
-example_fully_coincident.gbr
-example_guess_by_content.g0
-example_holes_dont_clear.gbr
-example_level_holes.gbr
-example_not_overlapping_contour.gbr
-example_not_overlapping_touching.gbr
-example_overlapping_contour.gbr
-example_overlapping_touching.gbr
-example_simple_contour.gbr
-example_single_contour_1.gbr
-example_single_contour_2.gbr
-example_single_contour_3.gbr
-example_am_exposure_modifier.gbr
-bottom_copper.GBL
-bottom_mask.GBS
-bottom_silk.GBO
-eagle_files/copper_bottom_l4.gbr
-eagle_files/copper_inner_l2.gbr
-eagle_files/copper_inner_l3.gbr
-eagle_files/copper_top_l1.gbr
-eagle_files/profile.gbr
-eagle_files/silkscreen_bottom.gbr
-eagle_files/silkscreen_top.gbr
-eagle_files/soldermask_bottom.gbr
-eagle_files/soldermask_top.gbr
-eagle_files/solderpaste_bottom.gbr
-eagle_files/solderpaste_top.gbr
-multiline_read.ger
-test_fine_lines_x.gbr
-test_fine_lines_y.gbr
-top_copper.GTL
-top_mask.GTS
-top_silk.GTO
-'''.splitlines() if l ])
+@pytest.mark.parametrize('reference', REFERENCE_FILES)
 def test_round_trip(temp_files, reference):
     tmp_gbr, tmp_png = temp_files
     ref = reference_path(reference)
+
     GerberFile.open(ref).save(tmp_gbr)
+
     mean, max = gerber_difference(ref, tmp_gbr, diff_out=tmp_png)
     assert mean < 1e-6
     assert max < 0.1
 
+TEST_ANGLES = [90, 180, 270, 30, 1.5, 10, 360, 1024, -30, -90]
+TEST_OFFSETS = [(0, 0), (100, 0), (0, 100), (2, 0), (10, 100)]
+
+@pytest.mark.filterwarnings('ignore:Deprecated.*statement found.*:DeprecationWarning')
+@pytest.mark.filterwarnings('ignore::SyntaxWarning')
+@pytest.mark.parametrize('reference', MIN_REFERENCE_FILES)
+@pytest.mark.parametrize('angle', TEST_ANGLES)
+def test_rotation(temp_files, reference, angle):
+    if 'flash_rectangle' in reference and angle == 1024:
+        # gerbv's rendering of this is broken, the hole is missing.
+        return
+
+    tmp_gbr, tmp_png = temp_files
+    ref = reference_path(reference)
+
+    f = GerberFile.open(ref)
+    f.rotate(deg_to_rad(angle))
+    f.save(tmp_gbr)
+
+    cx, cy = 0, to_gerbv_svg_units(10, unit='inch')
+    mean, max = gerber_difference(ref, tmp_gbr, diff_out=tmp_png, svg_transform=f'rotate({angle} {cx} {cy})')
+    assert mean < 1e-3 # relax mean criterion compared to above.
+    assert max < 0.9
+
+@pytest.mark.filterwarnings('ignore:Deprecated.*statement found.*:DeprecationWarning')
+@pytest.mark.filterwarnings('ignore::SyntaxWarning')
+@pytest.mark.parametrize('reference', MIN_REFERENCE_FILES)
+@pytest.mark.parametrize('angle', TEST_ANGLES)
+@pytest.mark.parametrize('center', [(0, 0), (-10, -10), (10, 10), (10, 0), (0, -10), (-10, 10), (10, 20)])
+def test_rotation_center(temp_files, reference, angle, center):
+    tmp_gbr, tmp_png = temp_files
+    ref = reference_path(reference)
+
+    f = GerberFile.open(ref)
+    f.rotate(deg_to_rad(angle), center=center)
+    f.save(tmp_gbr)
+
+    # calculate circle center in SVG coordinates 
+    size = (10, 10) # inches
+    cx, cy = to_gerbv_svg_units(center[0]), to_gerbv_svg_units(10, 'inch')-to_gerbv_svg_units(center[1], 'mm')
+    mean, max = gerber_difference(ref, tmp_gbr, diff_out=tmp_png,
+            svg_transform=f'rotate({angle} {cx} {cy})',
+            size=size)
+    assert mean < 1e-3
+    assert max < 0.9
+
+@pytest.mark.filterwarnings('ignore:Deprecated.*statement found.*:DeprecationWarning')
+@pytest.mark.filterwarnings('ignore::SyntaxWarning')
+@pytest.mark.parametrize('reference', MIN_REFERENCE_FILES)
+@pytest.mark.parametrize('offset', TEST_OFFSETS)
+def test_offset(temp_files, reference, offset):
+    tmp_gbr, tmp_png = temp_files
+    ref = reference_path(reference)
+
+    f = GerberFile.open(ref)
+    f.offset(*offset)
+    f.save(tmp_gbr, settings=FileSettings(unit=f.unit, number_format=(4,7)))
+
+    # flip y offset since svg's y axis is flipped compared to that of gerber
+    dx, dy = to_gerbv_svg_units(offset[0]), -to_gerbv_svg_units(offset[1])
+    mean, max = gerber_difference(ref, tmp_gbr, diff_out=tmp_png, svg_transform=f'translate({dx} {dy})')
+    assert mean < 1e-4
+    assert max < 0.9
+
+@pytest.mark.filterwarnings('ignore:Deprecated.*statement found.*:DeprecationWarning')
+@pytest.mark.filterwarnings('ignore::SyntaxWarning')
+@pytest.mark.parametrize('reference', MIN_REFERENCE_FILES)
+@pytest.mark.parametrize('angle', TEST_ANGLES)
+@pytest.mark.parametrize('center', [(0, 0), (10, 0), (0, -10), (10, 20)])
+@pytest.mark.parametrize('offset', [(0, 0), (100, 0), (0, 100), (100, 100), (100, 10)])
+def test_combined(temp_files, reference, angle, center, offset):
+    tmp_gbr, tmp_png = temp_files
+    ref = reference_path(reference)
+
+    f = GerberFile.open(ref)
+    f.rotate(deg_to_rad(angle), center=center)
+    f.offset(*offset)
+    f.save(tmp_gbr)
+
+    size = (10, 10) # inches
+    cx, cy = to_gerbv_svg_units(center[0]), to_gerbv_svg_units(10, 'inch')-to_gerbv_svg_units(center[1], 'mm')
+    dx, dy = to_gerbv_svg_units(offset[0]), -to_gerbv_svg_units(offset[1])
+    mean, max = gerber_difference(ref, tmp_gbr, diff_out=tmp_png,
+            svg_transform=f'rotate({anlge} {cx} {cy}) translate({dx} {dy})',
+            size=size)
+    assert mean < 1e-4
+    assert max < 0.9
+