add excellon statements

1 files changed, 266 insertions, 0 deletions

diff --git a/gerber/excellon_statements.py b/gerber/excellon_statements.py
new file mode 100644
index 0000000..4544f08
--- /dev/null
+++ b/gerber/excellon_statements.py
@@ -0,0 +1,266 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+# copyright 2014 Hamilton Kibbe <ham@hamiltonkib.be>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+#     http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from .utils import write_gerber_value
+
+
+__all__ = ['ExcellonTool', 'CommentStmt', 'HeaderBeginStmt', 'HeaderEndStmt',
+           ]
+
+
+class ExcellonStatement(object):
+    """ Excellon Statement abstract base class
+    """
+    def to_excellon(self):
+        pass
+
+
+class ExcellonTool(ExcellonStatement):
+    """ Excellon Tool class
+
+    Parameters
+    ----------
+    settings : FileSettings (dict-like)
+        File-wide settings.
+
+    kwargs : dict-like
+        Tool settings from the excellon statement. Valid keys are:
+            diameter : Tool diameter [expressed in file units]
+            rpm : Tool RPM
+            feed_rate : Z-axis tool feed rate
+            retract_rate : Z-axis tool retraction rate
+            max_hit_count : Number of hits allowed before a tool change
+            depth_offset : Offset of tool depth from tip of tool.
+
+    Attributes
+    ----------
+    number : integer
+        Tool number from the excellon file
+
+    diameter : float
+        Tool diameter in file units
+
+    rpm : float
+        Tool RPM
+
+    feed_rate : float
+        Tool Z-axis feed rate.
+
+    retract_rate : float
+        Tool Z-axis retract rate
+
+    depth_offset : float
+        Offset of depth measurement from tip of tool
+
+    max_hit_count : integer
+        Maximum number of tool hits allowed before a tool change
+
+    hit_count : integer
+        Number of tool hits in excellon file.
+    """
+
+    @classmethod
+    def from_line(cls, line, settings):
+        """ Create a Tool from an excellon file tool definition line.
+
+        Parameters
+        ----------
+        line : string
+            Tool definition line from an excellon file.
+
+        settings : FileSettings (dict-like)
+            Excellon file-wide settings
+
+        Returns
+        -------
+        tool : Tool
+            An ExcellonTool representing the tool defined in `line`
+        """
+        commands = re.split('([BCFHSTZ])', line)[1:]
+        commands = [(command, value) for command, value in pairwise(commands)]
+        args = {}
+        format = settings['format']
+        zero_suppression = settings['zero_suppression']
+        for cmd, val in commands:
+            if cmd == 'B':
+                args['retract_rate'] = parse_gerber_value(val, format, zero_suppression)
+            elif cmd == 'C':
+                args['diameter'] = parse_gerber_value(val, format, zero_suppression)
+            elif cmd == 'F':
+                args['feed_rate'] = parse_gerber_value(val, format, zero_suppression)
+            elif cmd == 'H':
+                args['max_hit_count'] = parse_gerber_value(val, format, zero_suppression)
+            elif cmd == 'S':
+                args['rpm'] = 1000 * parse_gerber_value(val, format, zero_suppression)
+            elif cmd == 'T':
+                args['number'] = int(val)
+            elif cmd == 'Z':
+                args['depth_offset'] = parse_gerber_value(val, format, zero_suppression)
+        return cls(settings, **args)
+
+    def from_dict(cls, settings, tool_dict):
+        return cls(settings, tool_dict)
+
+    def __init__(self, settings, **kwargs):
+        self.settings = settings
+        self.number = kwargs.get('number')
+        self.feed_rate = kwargs.get('feed_rate')
+        self.retract_rate = kwargs.get('retract_rate')
+        self.rpm = kwargs.get('rpm')
+        self.diameter = kwargs.get('diameter')
+        self.max_hit_count = kwargs.get('max_hit_count')
+        self.depth_offset = kwargs.get('depth_offset')
+        self.hit_count = 0
+
+    def to_excellon(self):
+        fmt = self.settings['format']
+        zs = self.settings['zero_suppression']
+        stmt = 'T%d' % self.number
+        if self.retract_rate:
+            stmt += 'B%s' % write_gerber_value(self.retract_rate, fmt, zs)
+        if self.diameter:
+            stmt += 'C%s' % write_gerber_value(self.diameter, fmt, zs)
+        if self.feed_rate:
+            stmt += 'F%s' % write_gerber_value(self.feed_rate, fmt, zs)
+        if self.max_hit_count:
+            stmt += 'H%s' % write_gerber_value(self.max_hit_count, fmt, zs)
+        if self.rpm:
+            if self.rpm < 100000.:
+                stmt += 'S%s' % write_gerber_value(self.rpm / 1000., fmt, zs)
+            else:
+                stmt += 'S%g' % self.rpm / 1000.
+        if self.depth_offset:
+            stmt += 'Z%s' % write_gerber_value(self.depth_offset, fmt, zs)
+        return stmt
+
+    def _hit(self):
+        self.hit_count += 1
+
+    def __repr__(self):
+        unit = 'in.' if self.settings.units == 'inch' else 'mm'
+        return '<ExcellonTool %d: %0.3f%s dia.>' % (self.number, self.diameter, unit)
+
+
+class CommentStmt(ExcellonStatement):
+    def __init__(self, comment):
+        self.comment = comment
+
+    def to_excellon(self):
+        return ';%s' % comment
+
+
+class HeaderBeginStmt(ExcellonStatement):
+
+    def __init__(self):
+        pass
+
+    def to_excellon(self):
+        return 'M48'
+
+
+class HeaderEndStmt(ExcellonStatement):
+
+    def __init__(self):
+        pass
+
+    def to_excellon(self):
+        return 'M95'
+
+
+class RewindStopStmt(ExcellonStatement):
+
+    def __init__(self):
+        pass
+
+    def to_excellon(self):
+        return '%'
+
+
+class EndOfProgramStmt(ExcellonStatement):
+
+    def __init__(self, x=None, y=None):
+        self.x = x
+        self.y = y
+
+    def to_excellon(self):
+        stmt = 'M30'
+        if self.x is not None:
+            stmt += 'X%s' % write_gerber_value(self.x)
+        if self.y is not None:
+            stmt += 'Y%s' % write_gerber_value(self.y)
+
+
+class UnitStmt(ExcellonStatement):
+
+    def __init__(self, units='inch', zero_suppression='trailing'):
+        self.units = units.lower()
+        self.zero_suppression = zero_suppression
+
+    def to_excellon(self):
+        stmt = '%s,%s' % ('INCH' if self.units == 'inch' else 'METRIC',
+                          'LZ' if self.zero_suppression == 'trailing' else 'TZ')
+
+
+class IncrementalModeStmt(ExcellonStatement):
+
+    def __init__(self, mode='off'):
+        if mode.lower() not in ['on', 'off']:
+            raise ValueError('Mode may be "on" or "off")
+        self.mode = 'off'
+
+    def to_excellon(self):
+        return 'ICI,%s' % 'OFF' if self.mode == 'off' else 'ON'
+
+
+class VersionStmt(ExcellonStatement):
+
+    def __init__(self, version=1):
+        self.version = int(version)
+
+    def to_excellon(self):
+        return 'VER,%d' % self.version
+
+
+class FormatStmt(ExcellonStatement):
+    def __init__(self, format=1):
+        self.format = int(format)
+
+    def to_excellon(self):
+        return 'FMAT,%d' % self.format
+
+
+class LinkToolStmt(ExcellonStatement):
+
+    def __init__(self, linked_tools):
+        self.linked_tools = [int(x) for x in linked_tools]
+
+    def to_excellon(self):
+        return '/'.join([str(x) for x in self.linked_tools])
+
+
+class MeasuringModeStmt(ExcellonStatement):
+    
+    def __init__(self, units='inch'):
+        units = units.lower()
+        if units not in ['inch', 'metric']:
+            raise ValueError('units must be "inch" or "metric"')
+        self.units = units
+        
+    def to_excellon(self):
+        return 'M72' if self.units == 'inch' else 'M71'
+
+