Add some documentation

11 files changed, 0 insertions, 883 deletions

diff --git a/doc/Makefile b/doc/Makefile
deleted file mode 100644
index 5c6b560..0000000
--- a/doc/Makefile
+++ /dev/null
@@ -1,177 +0,0 @@
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = sphinx-build
-PAPER         =
-BUILDDIR      = build
-
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
-endif
-
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
-
-help:
-	@echo "Please use \`make <target>' where <target> is one of"
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  xml        to make Docutils-native XML files"
-	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-
-clean:
-	rm -rf $(BUILDDIR)/*
-
-html:
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
-
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/GerberTools.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/GerberTools.qhc"
-
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/GerberTools"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/GerberTools"
-	@echo "# devhelp"
-
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
-
-xml:
-	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-	@echo
-	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-pseudoxml:
-	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-	@echo
-	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/doc/make.bat b/doc/make.bat
deleted file mode 100644
index 2860659..0000000
--- a/doc/make.bat
+++ /dev/null
@@ -1,242 +0,0 @@
-@ECHO OFF

-

-REM Command file for Sphinx documentation

-

-if "%SPHINXBUILD%" == "" (

-	set SPHINXBUILD=sphinx-build

-)

-set BUILDDIR=build

-set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% source

-set I18NSPHINXOPTS=%SPHINXOPTS% source

-if NOT "%PAPER%" == "" (

-	set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%

-	set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%

-)

-

-if "%1" == "" goto help

-

-if "%1" == "help" (

-	:help

-	echo.Please use `make ^<target^>` where ^<target^> is one of

-	echo.  html       to make standalone HTML files

-	echo.  dirhtml    to make HTML files named index.html in directories

-	echo.  singlehtml to make a single large HTML file

-	echo.  pickle     to make pickle files

-	echo.  json       to make JSON files

-	echo.  htmlhelp   to make HTML files and a HTML help project

-	echo.  qthelp     to make HTML files and a qthelp project

-	echo.  devhelp    to make HTML files and a Devhelp project

-	echo.  epub       to make an epub

-	echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter

-	echo.  text       to make text files

-	echo.  man        to make manual pages

-	echo.  texinfo    to make Texinfo files

-	echo.  gettext    to make PO message catalogs

-	echo.  changes    to make an overview over all changed/added/deprecated items

-	echo.  xml        to make Docutils-native XML files

-	echo.  pseudoxml  to make pseudoxml-XML files for display purposes

-	echo.  linkcheck  to check all external links for integrity

-	echo.  doctest    to run all doctests embedded in the documentation if enabled

-	goto end

-)

-

-if "%1" == "clean" (

-	for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i

-	del /q /s %BUILDDIR%\*

-	goto end

-)

-

-

-%SPHINXBUILD% 2> nul

-if errorlevel 9009 (

-	echo.

-	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx

-	echo.installed, then set the SPHINXBUILD environment variable to point

-	echo.to the full path of the 'sphinx-build' executable. Alternatively you

-	echo.may add the Sphinx directory to PATH.

-	echo.

-	echo.If you don't have Sphinx installed, grab it from

-	echo.http://sphinx-doc.org/

-	exit /b 1

-)

-

-if "%1" == "html" (

-	%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished. The HTML pages are in %BUILDDIR%/html.

-	goto end

-)

-

-if "%1" == "dirhtml" (

-	%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.

-	goto end

-)

-

-if "%1" == "singlehtml" (

-	%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.

-	goto end

-)

-

-if "%1" == "pickle" (

-	%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished; now you can process the pickle files.

-	goto end

-)

-

-if "%1" == "json" (

-	%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished; now you can process the JSON files.

-	goto end

-)

-

-if "%1" == "htmlhelp" (

-	%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished; now you can run HTML Help Workshop with the ^

-.hhp project file in %BUILDDIR%/htmlhelp.

-	goto end

-)

-

-if "%1" == "qthelp" (

-	%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished; now you can run "qcollectiongenerator" with the ^

-.qhcp project file in %BUILDDIR%/qthelp, like this:

-	echo.^> qcollectiongenerator %BUILDDIR%\qthelp\GerberTools.qhcp

-	echo.To view the help file:

-	echo.^> assistant -collectionFile %BUILDDIR%\qthelp\GerberTools.ghc

-	goto end

-)

-

-if "%1" == "devhelp" (

-	%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished.

-	goto end

-)

-

-if "%1" == "epub" (

-	%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished. The epub file is in %BUILDDIR%/epub.

-	goto end

-)

-

-if "%1" == "latex" (

-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.

-	goto end

-)

-

-if "%1" == "latexpdf" (

-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex

-	cd %BUILDDIR%/latex

-	make all-pdf

-	cd %BUILDDIR%/..

-	echo.

-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.

-	goto end

-)

-

-if "%1" == "latexpdfja" (

-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex

-	cd %BUILDDIR%/latex

-	make all-pdf-ja

-	cd %BUILDDIR%/..

-	echo.

-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.

-	goto end

-)

-

-if "%1" == "text" (

-	%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished. The text files are in %BUILDDIR%/text.

-	goto end

-)

-

-if "%1" == "man" (

-	%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished. The manual pages are in %BUILDDIR%/man.

-	goto end

-)

-

-if "%1" == "texinfo" (

-	%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.

-	goto end

-)

-

-if "%1" == "gettext" (

-	%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished. The message catalogs are in %BUILDDIR%/locale.

-	goto end

-)

-

-if "%1" == "changes" (

-	%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.The overview file is in %BUILDDIR%/changes.

-	goto end

-)

-

-if "%1" == "linkcheck" (

-	%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Link check complete; look for any errors in the above output ^

-or in %BUILDDIR%/linkcheck/output.txt.

-	goto end

-)

-

-if "%1" == "doctest" (

-	%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Testing of doctests in the sources finished, look at the ^

-results in %BUILDDIR%/doctest/output.txt.

-	goto end

-)

-

-if "%1" == "xml" (

-	%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished. The XML files are in %BUILDDIR%/xml.

-	goto end

-)

-

-if "%1" == "pseudoxml" (

-	%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml

-	if errorlevel 1 exit /b 1

-	echo.

-	echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.

-	goto end

-)

-

-:end

diff --git a/doc/source/about.rst b/doc/source/about.rst
deleted file mode 100644
index 85e7184..0000000
--- a/doc/source/about.rst
+++ /dev/null
@@ -1,40 +0,0 @@
-About PCB Tools
-===============
-
-
-PCB Tools provides a set of utilities for visualizing and working with PCB
-design files in a variety of formats. The design files are generally referred
-to as Gerber files. This is a generic term that may refer to
-`RS-274X (Gerber) <http://en.wikipedia.org/wiki/Gerber_format>`_,
-`ODB++ <http://en.wikipedia.org/wiki/ODB%2B%2B>`_ ,
-or `Excellon <http://en.wikipedia.org/wiki/Excellon_format>`_ files. These
-file formats are used by the CNC equipment used to manufacutre PCBs.
-
-PCB Tools currently supports the following file formats:
-
-- Gerber (RS-274X)
-- Excellon
-
-with planned support for IPC-2581, ODB++ and more.
-
-Image Rendering
-~~~~~~~~~~~~~~~
-.. image:: ../../examples/cairo_example.png
-   :alt: Rendering Example
-
-The PCB Tools module provides tools to visualize PCBs and export images in a
-variety of formats, including SVG and PNG.
-
-
-
-
-Future Plans
-~~~~~~~~~~~~
-We are working on adding the following features to PCB Tools:
-
-- Design Rules Checking
-- Editing
-- Panelization
-
-
-
diff --git a/doc/source/conf.py b/doc/source/conf.py
deleted file mode 100644
index 238a0b8..0000000
--- a/doc/source/conf.py
+++ /dev/null
@@ -1,262 +0,0 @@
-# -*- coding: utf-8 -*-

-#

-# Gerber Tools documentation build configuration file, created by

-# sphinx-quickstart on Sun Sep 28 18:16:46 2014.

-#

-# This file is execfile()d with the current directory set to its

-# containing dir.

-#

-# Note that not all possible configuration values are present in this

-# autogenerated file.

-#

-# All configuration values have a default; values that are commented out

-# serve to show the default.

-

-import sys

-import os

-

-# If extensions (or modules to document with autodoc) are in another directory,

-# add these directories to sys.path here. If the directory is relative to the

-# documentation root, use os.path.abspath to make it absolute, like shown here.

-sys.path.insert(0, os.path.abspath('../../'))

-

-# -- General configuration ------------------------------------------------

-

-# If your documentation needs a minimal Sphinx version, state it here.

-#needs_sphinx = '1.0'

-

-# Add any Sphinx extension module names here, as strings. They can be

-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom

-# ones.

-extensions = [

-    'sphinx.ext.autodoc',

-    'sphinx.ext.autosummary',

-    'numpydoc',

-]

-

-# Add any paths that contain templates here, relative to this directory.

-templates_path = ['_templates']

-

-# The suffix of source filenames.

-source_suffix = '.rst'

-

-# The encoding of source files.

-#source_encoding = 'utf-8-sig'

-

-# The master toctree document.

-master_doc = 'index'

-

-# General information about the project.

-project = u'PCB Tools'

-copyright = u'2014 Paulo Henrique Silva <ph.silva@gmail.com>, Hamilton Kibbe <ham@hamiltonkib.be>'

-

-# The version info for the project you're documenting, acts as replacement for

-# |version| and |release|, also used in various other places throughout the

-# built documents.

-#

-# The short X.Y version.

-version = '0.1'

-# The full version, including alpha/beta/rc tags.

-release = '0.1'

-

-# The language for content autogenerated by Sphinx. Refer to documentation

-# for a list of supported languages.

-#language = None

-

-# There are two options for replacing |today|: either, you set today to some

-# non-false value, then it is used:

-#today = ''

-# Else, today_fmt is used as the format for a strftime call.

-#today_fmt = '%B %d, %Y'

-

-# List of patterns, relative to source directory, that match files and

-# directories to ignore when looking for source files.

-exclude_patterns = []

-

-# The reST default role (used for this markup: `text`) to use for all

-# documents.

-#default_role = None

-

-# If true, '()' will be appended to :func: etc. cross-reference text.

-#add_function_parentheses = True

-

-# If true, the current module name will be prepended to all description

-# unit titles (such as .. function::).

-add_module_names = False

-

-# If true, sectionauthor and moduleauthor directives will be shown in the

-# output. They are ignored by default.

-show_authors = False

-

-# The name of the Pygments (syntax highlighting) style to use.

-pygments_style = 'sphinx'

-

-# A list of ignored prefixes for module index sorting.

-#modindex_common_prefix = []

-

-# If true, keep warnings as "system message" paragraphs in the built documents.

-#keep_warnings = False

-

-

-# -- Options for HTML output ----------------------------------------------

-

-# The theme to use for HTML and HTML Help pages.  See the documentation for

-# a list of builtin themes.

-html_theme = 'default'

-

-# Theme options are theme-specific and customize the look and feel of a theme

-# further.  For a list of options available for each theme, see the

-# documentation.

-#html_theme_options = {}

-

-# Add any paths that contain custom themes here, relative to this directory.

-#html_theme_path = []

-

-# The name for this set of Sphinx documents.  If None, it defaults to

-# "<project> v<release> documentation".

-#html_title = None

-

-# A shorter title for the navigation bar.  Default is the same as html_title.

-#html_short_title = None

-

-# The name of an image file (relative to this directory) to place at the top

-# of the sidebar.

-#html_logo = None

-

-# The name of an image file (within the static path) to use as favicon of the

-# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32

-# pixels large.

-#html_favicon = None

-

-# Add any paths that contain custom static files (such as style sheets) here,

-# relative to this directory. They are copied after the builtin static files,

-# so a file named "default.css" will overwrite the builtin "default.css".

-html_static_path = ['_static']

-

-# Add any extra paths that contain custom files (such as robots.txt or

-# .htaccess) here, relative to this directory. These files are copied

-# directly to the root of the documentation.

-#html_extra_path = []

-

-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,

-# using the given strftime format.

-#html_last_updated_fmt = '%b %d, %Y'

-

-# If true, SmartyPants will be used to convert quotes and dashes to

-# typographically correct entities.

-#html_use_smartypants = True

-

-# Custom sidebar templates, maps document names to template names.

-#html_sidebars = {}

-

-# Additional templates that should be rendered to pages, maps page names to

-# template names.

-#html_additional_pages = {}

-

-# If false, no module index is generated.

-#html_domain_indices = True

-

-# If false, no index is generated.

-#html_use_index = True

-

-# If true, the index is split into individual pages for each letter.

-#html_split_index = False

-

-# If true, links to the reST sources are added to the pages.

-#html_show_sourcelink = True

-

-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.

-#html_show_sphinx = True

-

-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.

-#html_show_copyright = True

-

-# If true, an OpenSearch description file will be output, and all pages will

-# contain a <link> tag referring to it.  The value of this option must be the

-# base URL from which the finished HTML is served.

-#html_use_opensearch = ''

-

-# This is the file name suffix for HTML files (e.g. ".xhtml").

-#html_file_suffix = None

-

-# Output file base name for HTML help builder.

-htmlhelp_basename = 'PCBToolsdoc'

-

-

-# -- Options for LaTeX output ---------------------------------------------

-

-latex_elements = {

-# The paper size ('letterpaper' or 'a4paper').

-#'papersize': 'letterpaper',

-

-# The font size ('10pt', '11pt' or '12pt').

-#'pointsize': '10pt',

-

-# Additional stuff for the LaTeX preamble.

-#'preamble': '',

-}

-

-# Grouping the document tree into LaTeX files. List of tuples

-# (source start file, target name, title,

-#  author, documentclass [howto, manual, or own class]).

-latex_documents = [

-  ('index', 'PCBTools.tex', u'PCB Tools Documentation',

-   u'Hamilton Kibbe', 'manual'),

-]

-

-# The name of an image file (relative to this directory) to place at the top of

-# the title page.

-#latex_logo = None

-

-# For "manual" documents, if this is true, then toplevel headings are parts,

-# not chapters.

-#latex_use_parts = False

-

-# If true, show page references after internal links.

-#latex_show_pagerefs = False

-

-# If true, show URL addresses after external links.

-#latex_show_urls = False

-

-# Documents to append as an appendix to all manuals.

-#latex_appendices = []

-

-# If false, no module index is generated.

-#latex_domain_indices = True

-

-

-# -- Options for manual page output ---------------------------------------

-

-# One entry per manual page. List of tuples

-# (source start file, name, description, authors, manual section).

-man_pages = [

-    ('index', 'pcbtools', u'PCB Tools Documentation',

-     [u'Hamilton Kibbe'], 1)

-]

-

-# If true, show URL addresses after external links.

-#man_show_urls = False

-

-

-# -- Options for Texinfo output -------------------------------------------

-

-# Grouping the document tree into Texinfo files. List of tuples

-# (source start file, target name, title, author,

-#  dir menu entry, description, category)

-texinfo_documents = [

-  ('index', 'PCBTools', u'PCB Tools Documentation',

-   u'Hamilton Kibbe', 'PCBTools', 'Tools for working with PCB CAM files.',

-   'Miscellaneous'),

-]

-

-# Documents to append as an appendix to all manuals.

-#texinfo_appendices = []

-

-# If false, no module index is generated.

-#texinfo_domain_indices = True

-

-# How to display URL addresses: 'footnote', 'no', or 'inline'.

-#texinfo_show_urls = 'footnote'

-

-# If true, do not generate a @detailmenu in the "Top" node's menu.

-#texinfo_no_detailmenu = False

diff --git a/doc/source/documentation/excellon.rst b/doc/source/documentation/excellon.rst
deleted file mode 100644
index 9cd7ee1..0000000
--- a/doc/source/documentation/excellon.rst
+++ /dev/null
@@ -1,42 +0,0 @@
-:mod:`excellon` --- Excellon file handling
-==============================================
-
-.. module:: excellon
-   :synopsis: Functions and classes for handling Excellon files
-.. sectionauthor:: Hamilton Kibbe <ham@hamiltonkib.be>
-
-
-The Excellon format is the most common format for exporting PCB drill
-information. The Excellon format is used to program CNC drilling macines for
-drilling holes in PCBs. As such, excellon files are sometimes refererred to as
-NC-drill files.  The Excellon format reference is available 
-`here <http://www.excellon.com/manuals/program.htm>`_. The :mod:`excellon`
-submodule implements classes to read and write excellon files without having
-to know the precise details of the format.
-
-The :mod:`excellon` submodule's :func:`read` function serves as a
-simple interface for parsing excellon files.  The :class:`ExcellonFile` class
-stores all the information contained in an Excellon file allowing the file to
-be analyzed, modified, and updated. The :class:`ExcellonParser` class is used
-in the background for parsing RS-274X files.
-
-.. _excellon-contents:
-
-Functions
----------
-The :mod:`excellon` module defines the following functions:
-
-.. autofunction:: gerber.excellon.read
-    
-
-Classes
--------
-The :mod:`excellon` module defines the following classes:
-
-.. autoclass:: gerber.excellon.ExcellonFile
-    :members:
-    
-
-.. autoclass:: gerber.excellon.ExcellonParser
-    :members:
-    
diff --git a/doc/source/documentation/index.rst b/doc/source/documentation/index.rst
deleted file mode 100644
index dec83f9..0000000
--- a/doc/source/documentation/index.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-PCB Tools Reference
-======================
-
-.. toctree::
-    :maxdepth: 2
-
-    Gerber (RS-274X) Files <rs274x>
-    Excellon Files <excellon>
-    Operations <operations>
-    Rendering <render>
diff --git a/doc/source/documentation/operations.rst b/doc/source/documentation/operations.rst
deleted file mode 100644
index 6551236..0000000
--- a/doc/source/documentation/operations.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-:mod:`operations` --- Cam File operations
-=========================================
-
-.. module:: operations
-   :synopsis: Functions for modifying CAM files
-.. sectionauthor:: Hamilton Kibbe <ham@hamiltonkib.be>
-
-
-The :mod:`operations` module provides functions which modify
-:class:`gerber.cam.CamFile` objects. All of the functions in this module
-return a modified copy of the supplied file.
-
-.. _operations-contents:
-
-Functions
----------
-The :mod:`operations` module defines the following functions:
-
-.. autofunction:: gerber.operations.to_inch
-.. autofunction:: gerber.operations.to_metric
-.. autofunction:: gerber.operations.offset
-
-
-
diff --git a/doc/source/documentation/render.rst b/doc/source/documentation/render.rst
deleted file mode 100644
index 324ef71..0000000
--- a/doc/source/documentation/render.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-:mod:`render` --- Gerber file Rendering
-==============================================
-
-.. module:: render
-   :synopsis: Functions and classes for handling Excellon files
-.. sectionauthor:: Hamilton Kibbe <ham@hamiltonkib.be>
-
-Render Module
--------------
-.. automodule:: gerber.render.render
-    :members:
diff --git a/doc/source/documentation/rs274x.rst b/doc/source/documentation/rs274x.rst
deleted file mode 100644
index 064c82f..0000000
--- a/doc/source/documentation/rs274x.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-:mod:`rs274x` --- RS-274X file handling
-==============================================
-
-.. module:: rs274x
-   :synopsis: Functions and classes for handling RS-274X  files
-.. sectionauthor:: Hamilton Kibbe <ham@hamiltonkib.be>
-
-
-The RS-274X (Gerber) format is the most common format for exporting PCB
-artwork.  The Specification is published by Ucamco and is available
-`here <http://www.ucamco.com/files/downloads/file/81/the_gerber_file_format_specification.pdf>`_.
-The :mod:`rs274x` submodule implements classes to read and write
-RS-274X files without having to know the precise details of the format.
-
-The :mod:`rs274x` submodule's :func:`read` function serves as a
-simple interface for parsing gerber files.  The :class:`GerberFile` class
-stores all the information contained in a gerber file allowing the file to be
-analyzed, modified, and updated. The :class:`GerberParser` class is used in
-the background for parsing RS-274X files.
-
-.. _gerber-contents:
-
-Functions
----------
-The :mod:`rs274x` module defines the following functions:
-
-.. autofunction:: gerber.rs274x.read
-
-Classes
--------
-The :mod:`rs274x` module defines the following classes:
-
-.. autoclass:: gerber.rs274x.GerberFile
-    :members:
-
-.. autoclass:: gerber.rs274x.GerberParser
-    :members:
diff --git a/doc/source/features.rst b/doc/source/features.rst
deleted file mode 100644
index 67d9e2a..0000000
--- a/doc/source/features.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-Feature Suppport
-================
-
-Currently supported features are as follows:
-
-============  ========  ===========  ================  ======  =======  =======
-File Format   Parsing    Rendering   Unit Conversion   Scale   Offset   Rotate
-============  ========  ===========  ================  ======  =======  =======
-RS274-X       Yes       Yes          Yes               No      Yes      No
-Excellon      Yes       Yes          Yes               No      Yes      No
-ODB++         No        No           No                No      No       No
-============  ========  ===========  ================  ======  =======  =======
-
-
diff --git a/doc/source/index.rst b/doc/source/index.rst
deleted file mode 100644
index c96ff8a..0000000
--- a/doc/source/index.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-.. PCB-tools documentation master file, created by

-   sphinx-quickstart on Sun Sep 28 18:16:46 2014.

-   You can adapt this file completely to your liking, but it should at least

-   contain the root `toctree` directive.

-

-PCB-Tools

-========================================

-

-Contents:

-

-.. toctree::

-    :maxdepth: 1

-    

-    about

-    features

-    documentation/index

-

-Indices and tables

-==================

-

-* :ref:`genindex`

-* :ref:`modindex`

-* :ref:`search`

-