remove ansible scripts, they are now in their own "infra" repo

1 files changed, 0 insertions, 372 deletions

diff --git a/gerboweb/deploy/nsd.conf b/gerboweb/deploy/nsd.conf
deleted file mode 100644
index d4b577f..0000000
--- a/gerboweb/deploy/nsd.conf
+++ /dev/null
@@ -1,372 +0,0 @@
-#
-# nsd.conf -- the NSD(8) configuration file, nsd.conf(5).
-#
-# Copyright (c) 2001-2011, NLnet Labs. All rights reserved.
-#
-# See LICENSE for the license.
-#
-
-# This is a comment.
-# Sample configuration file
-# include: "file" # include that file's text over here.  Globbed, "*.conf"
-
-# options for the nsd server
-server:
-	# Number of NSD servers to fork.  Put the number of CPUs to use here.
-	server-count: 1
-
-	# uncomment to specify specific interfaces to bind (default are the
-	# wildcard interfaces 0.0.0.0 and ::0).
-	# For servers with multiple IP addresses, list them one by one,
-	# or the source address of replies could be wrong.
-	# Use ip-transparent to be able to list addresses that turn on later.
-	# ip-address: 1.2.3.4
-	# ip-address: 1.2.3.4@5678
-	# ip-address: 12fe::8ef0
-
-	# Allow binding to non local addresses. Default no.
-	# ip-transparent: no
-
-	# Allow binding to addresses that are down.  Default no.
-	# ip-freebind: no
-
-	# use the reuseport socket option for performance. Default no.
-	reuseport: yes
-
-	# override maximum socket send buffer size.  Default of 0 results in
-	# send buffer size being set to 1048576 (bytes).
-	# send-buffer-size: 1048576
-
-	# override maximum socket receive buffer size. Default of 0 results in
-	# receive buffer size being set to 1048576 (bytes).
-	# receive-buffer-size: 1048576
-
-	# enable debug mode, does not fork daemon process into the background.
-	# debug-mode: no
-
-	# listen on IPv4 connections
-	# do-ip4: yes
-
-	# listen on IPv6 connections
-	# do-ip6: yes
-
-	# port to answer queries on. default is 53.
-	# port: 53
-
-	# Verbosity level.
-	# verbosity: 0
-
-	# After binding socket, drop user privileges.
-	# can be a username, id or id.gid.
-	# username: nsd
-
-	# Run NSD in a chroot-jail.
-	# make sure to have pidfile and database reachable from there.
-	# by default, no chroot-jail is used.
-	# chroot: "/etc/nsd"
-
-	# The directory for zonefile: files.  The daemon chdirs here.
-	zonesdir: "/etc/nsd"
-
-	# the list of dynamically added zones.
-	# zonelistfile: "/var/lib/nsd/zone.list"
-
-	# the database to use
-	# if set to "" then no disk-database is used, less memory usage.
-	database: ""
-
-	# log messages to file. Default to stderr and syslog (with
-	# facility LOG_DAEMON).  stderr disappears when daemon goes to bg.
-	# logfile: "/var/log/nsd.log"
-
-	# File to store pid for nsd in.
-	# pidfile: "/run/nsd/nsd.pid"
-
-	# The file where secondary zone refresh and expire timeouts are kept.
-	# If you delete this file, all secondary zones are forced to be
-	# 'refreshing' (as if nsd got a notify).  Set to "" to disable.
-	# xfrdfile: "/var/lib/nsd/ixfr.state"
-
-	# The directory where zone transfers are stored, in a subdir of it.
-	# xfrdir: "/tmp"
-
-	# don't answer VERSION.BIND and VERSION.SERVER CHAOS class queries
-	hide-version: yes
-
-	# don't answer HOSTNAME.BIND and ID.SERVER CHAOS class queries
-	hide-identity: yes
-
-	# version string the server responds with for chaos queries.
-	# default is 'NSD x.y.z' with the server's version number.
-	# version: "NSD"
-
-	# identify the server (CH TXT ID.SERVER entry).
-	# identity: "unidentified server"
-
-	# NSID identity (hex string, or "ascii_somestring"). default disabled.
-	# nsid: "aabbccdd"
-
-	# Maximum number of concurrent TCP connections per server.
-	# tcp-count: 100
-
-	# Accept (and immediately close) TCP connections after maximum number
-	# of connections is reached to prevent kernel connection queue from
-	# growing.
-	# tcp-reject-overflow: no
-
-	# Maximum number of queries served on a single TCP connection.
-	# By default 0, which means no maximum.
-	# tcp-query-count: 0
-
-	# Override the default (120 seconds) TCP timeout.
-	# tcp-timeout: 120
-
-	# Maximum segment size (MSS) of TCP socket on which the server
-	# responds to queries. Default is 0, system default MSS.
-	# tcp-mss: 0
-
-	# Maximum segment size (MSS) of TCP socket for outgoing AXFR request.
-	# Default is 0, system default MSS.
-	# outgoing-tcp-mss: 0
-
-	# Preferred EDNS buffer size for IPv4.
-	# ipv4-edns-size: 4096
-
-	# Preferred EDNS buffer size for IPv6.
-	# ipv6-edns-size: 4096
-
-	# statistics are produced every number of seconds. Prints to log.
-	# Default is 0, meaning no statistics are produced.
-	# statistics: 3600
-
-	# Number of seconds between reloads triggered by xfrd.
-	# xfrd-reload-timeout: 1
-
-	# log timestamp in ascii (y-m-d h:m:s.msec), yes is default.
-	# log-time-ascii: yes
-
-	# round robin rotation of records in the answer.
-	round-robin: yes
-
-	# minimal-responses only emits extra data for referrals.
-	minimal-responses: yes
-
-	# Do not return additional information if the apex zone of the
-	# additional information is configured but does not match the apex zone
-	# of the initial query.
-	# confine-to-zone: no
-
-	# refuse queries of type ANY.  For stopping floods.
-	refuse-any: yes
-
-	# check mtime of all zone files on start and sighup
-	# zonefiles-check: yes
-
-	# write changed zonefiles to disk, every N seconds.
-	# default is 0(disabled) or 3600(if database is "").
-	# zonefiles-write: 3600
-
-	# RRLconfig
-	# Response Rate Limiting, size of the hashtable. Default 1000000.
-	# rrl-size: 1000000
-
-	# Response Rate Limiting, maximum QPS allowed (from one query source).
-	# If set to 0, ratelimiting is disabled. Also set
-	# rrl-whitelist-ratelimit to 0 to disable ratelimit processing.
-	# Default is on.
-	# rrl-ratelimit: 200
-
-	# Response Rate Limiting, number of packets to discard before
-	# sending a SLIP response (a truncated one, allowing an honest
-	# resolver to retry with TCP). Default is 2 (one half of the
-	# queries will receive a SLIP response, 0 disables SLIP (all
-	# packets are discarded), 1 means every request will get a
-	# SLIP response.  When the ratelimit is hit the traffic is
-	# divided by the rrl-slip value.
-	# rrl-slip: 2
-
-	# Response Rate Limiting, IPv4 prefix length. Addresses are
-	# grouped by netblock.
-	# rrl-ipv4-prefix-length: 24
-
-	# Response Rate Limiting, IPv6 prefix length. Addresses are
-	# grouped by netblock.
-	# rrl-ipv6-prefix-length: 64
-
-	# Response Rate Limiting, maximum QPS allowed (from one query source)
-	# for whitelisted types. Default is on.
-	# rrl-whitelist-ratelimit: 2000
-	# RRLend
-
-	# Optional local server config
-	include: "/etc/nsd/server.d/*.conf"
-
-# Include optional local configs.
-include: "/etc/nsd/conf.d/*.conf"
-
-# Fedora: DNSTAP not yet enabled
-# dnstap:
-	# set this to yes and set one or more of dnstap-log-..-messages to yes.
-	# dnstap-enable: no
-	# dnstap-socket-path: "/var/run/dnstap.sock"
-	# dnstap-send-identity: no
-	# dnstap-send-version: no
-	# dnstap-identity: ""
-	# dnstap-version: ""
-	# dnstap-log-auth-query-messages: no
-	# dnstap-log-auth-response-messages: no
-
-	# Service clients over TLS (on the TCP sockets), with plain DNS inside
-	# the TLS stream. Give the certificate to use and private key.
-	# Default is "" (disabled). Requires restart to take effect.
-	# tls-service-key: "path/to/privatekeyfile.key"
-	# tls-service-pem: "path/to/publiccertfile.pem"
-	# tls-service-ocsp: "path/to/ocsp.pem"
-	# tls-port: 853
-
-# Remote control config section.
-remote-control:
-	# Enable remote control with nsd-control(8) here.
-	# set up the keys and certificates with nsd-control-setup.
-	control-enable: yes
-
-	# what interfaces are listened to for control, default is on localhost.
-	# with an absolute path, a unix local named pipe is used for control
-	# (and key and cert files are not needed, use directory permissions).
-	# control-interface: 127.0.0.1
-	# control-interface: ::1
-	control-interface: /run/nsd/nsd.ctl
-
-	# port number for remote control operations (uses TLS over TCP).
-	# control-port: 8952
-
-	# nsd server key file for remote control.
-	# server-key-file: "/etc/nsd/nsd_server.key"
-
-	# nsd server certificate file for remote control.
-	# server-cert-file: "/etc/nsd/nsd_server.pem"
-
-	# nsd-control key file.
-	# control-key-file: "/etc/nsd/nsd_control.key"
-
-	# nsd-control certificate file.
-	# control-cert-file: "/etc/nsd/nsd_control.pem"
-
-
-# Secret keys for TSIGs that secure zone transfers.
-# You could include: "secret.keys" and put the 'key:' statements in there,
-# and give that file special access control permissions.
-#
-# key:
-	# The key name is sent to the other party, it must be the same
-	#name: "keyname"
-	# algorithm hmac-md5, or sha1, sha256, sha224, sha384, sha512
-	#algorithm: sha256
-	# secret material, must be the same as the other party uses.
-	# base64 encoded random number.
-	# e.g. from dd if=/dev/random of=/dev/stdout count=1 bs=32 | base64
-	#secret: "K2tf3TRjvQkVCmJF3/Z9vA=="
-
-
-# Patterns have zone configuration and they are shared by one or more zones.
-#
-# pattern:
-	# name by which the pattern is referred to
-	#name: "myzones"
-	# the zonefile for the zones that use this pattern.
-	# if relative then from the zonesdir (inside the chroot).
-	# the name is processed: %s - zone name (as appears in zone:name).
-	# %1 - first character of zone name, %2 second, %3 third.
-	# %z - topleveldomain label of zone, %y, %x next labels in name.
-	# if label or character does not exist you get a dot '.'.
-	# for example "%s.zone" or "zones/%1/%2/%3/%s" or "secondary/%z/%s"
-	#zonefile: "%s.zone"
-
-	# If no master and slave access control elements are provided,
-	# this zone will not be served to/from other servers.
-
-	# A master zone needs notify: and provide-xfr: lists.  A slave
-	# may also allow zone transfer (for debug or other secondaries).
-	# notify these slaves when the master zone changes, address TSIG|NOKEY
-	# IP can be ipv4 and ipv6, with @port for a nondefault port number.
-	#notify: 192.0.2.1 NOKEY
-	# allow these IPs and TSIG to transfer zones, addr TSIG|NOKEY|BLOCKED
-	# address range 192.0.2.0/24, 1.2.3.4&255.255.0.0, 3.0.2.20-3.0.2.40
-	#provide-xfr: 192.0.2.0/24 my_tsig_key_name
-	# set the number of retries for notify.
-	#notify-retry: 5
-
-	# uncomment to provide AXFR to all the world
-	# provide-xfr: 0.0.0.0/0 NOKEY
-	# provide-xfr: ::0/0 NOKEY
-
-	# A slave zone needs allow-notify: and request-xfr: lists.
-	#allow-notify: 2001:db8::0/64 my_tsig_key_name
-	# By default, a slave will request a zone transfer with IXFR/TCP.
-	# If you want to make use of IXFR/UDP use: UDP addr tsigkey
-	# for a master that only speaks AXFR (like NSD) use AXFR addr tsigkey
-	#request-xfr: 192.0.2.2 the_tsig_key_name
-	# Attention: You cannot use UDP and AXFR together. AXFR is always over
-	# TCP. If you use UDP, we higly recommend you to deploy TSIG.
-	# Allow AXFR fallback if the master does not support IXFR. Default
-	# is yes.
-	#allow-axfr-fallback: yes
-	# set local interface for sending zone transfer requests.
-	# default is let the OS choose.
-	#outgoing-interface: 10.0.0.10
-	# limit the refresh and retry interval in seconds.
-	#max-refresh-time: 2419200
-	#min-refresh-time: 0
-	#max-retry-time: 1209600
-	#min-retry-time: 0
-
-	# Slave server tries zone transfer to all masters and picks highest
-	# zone version available, for when masters have different versions.
-	#multi-master-check: no
-
-	# limit the zone transfer size (in bytes), stops very large transfers
-	# 0 is no limits enforced.
-	# size-limit-xfr: 0
-
-	# if compiled with --enable-zone-stats, give name of stat block for
-	# this zone (or group of zones).  Output from nsd-control stats.
-	# zonestats: "%s"
-
-	# if you give another pattern name here, at this point the settings
-	# from that pattern are inserted into this one (as if it were a
-	# macro).  The statement can be given in between other statements,
-	# because the order of access control elements can make a difference
-	# (which master to request from first, which slave to notify first).
-	#include-pattern: "common-masters"
-
-
-# Fixed zone entries.  Here you can config zones that cannot be deleted.
-# Zones that are dynamically added and deleted are put in the zonelist file.
-#
-# zone:
-	# name: "example.com"
-	# you can give a pattern here, all the settings from that pattern
-	# are then inserted at this point
-	# include-pattern: "master"
-	# You can also specify (additional) options directly for this zone.
-	# zonefile: "example.com.zone"
-	# request-xfr: 192.0.2.1 example.com.key
-
-	# RRLconfig
-	# Response Rate Limiting, whitelist types
-	# rrl-whitelist: nxdomain
-	# rrl-whitelist: error
-	# rrl-whitelist: referral
-	# rrl-whitelist: any
-	# rrl-whitelist: rrsig
-	# rrl-whitelist: wildcard
-	# rrl-whitelist: nodata
-	# rrl-whitelist: dnskey
-	# rrl-whitelist: positive
-	# rrl-whitelist: all
-	# RRLend
-
-zone:
-  name: "dyn.jaseg.de"
-  zonefile: "/var/lib/dyndns/dyn.jaseg.de.zone"
-