Polish wifi LED driver post

9 files changed, 4 insertions, 21 deletions

diff --git a/content/posts/wifi-led-driver/images/lyza_board_in_case.jpg b/content/posts/wifi-led-driver/images/board_in_case.jpg
index 843900a..843900a 100644
--- a/content/posts/wifi-led-driver/images/lyza_board_in_case.jpg
+++ b/content/posts/wifi-led-driver/images/board_in_case.jpg
diff --git a/content/posts/wifi-led-driver/images/lyza_board_in_case.small.jpg b/content/posts/wifi-led-driver/images/board_in_case.small.jpg
index 5c0aa81..5c0aa81 100644
--- a/content/posts/wifi-led-driver/images/lyza_board_in_case.small.jpg
+++ b/content/posts/wifi-led-driver/images/board_in_case.small.jpg
diff --git a/content/posts/wifi-led-driver/images/lyza_boards.jpg b/content/posts/wifi-led-driver/images/boards.jpg
index 79f8154..79f8154 100644
--- a/content/posts/wifi-led-driver/images/lyza_boards.jpg
+++ b/content/posts/wifi-led-driver/images/boards.jpg
diff --git a/content/posts/wifi-led-driver/images/lyza_boards.small.jpg b/content/posts/wifi-led-driver/images/boards.small.jpg
index 6f5c28c..6f5c28c 100644
--- a/content/posts/wifi-led-driver/images/lyza_boards.small.jpg
+++ b/content/posts/wifi-led-driver/images/boards.small.jpg
diff --git a/content/posts/wifi-led-driver/images/lyza_case_complete.jpg b/content/posts/wifi-led-driver/images/lyza_case_complete.jpg
deleted file mode 100644
index c784149..0000000
--- a/content/posts/wifi-led-driver/images/lyza_case_complete.jpg
+++ /dev/null
diff --git a/content/posts/wifi-led-driver/images/lyza_case_complete.small.jpg b/content/posts/wifi-led-driver/images/lyza_case_complete.small.jpg
deleted file mode 100644
index db9b083..0000000
--- a/content/posts/wifi-led-driver/images/lyza_case_complete.small.jpg
+++ /dev/null
diff --git a/content/posts/wifi-led-driver/images/lyza_case_raw.jpg b/content/posts/wifi-led-driver/images/lyza_case_raw.jpg
deleted file mode 100644
index 4b61a52..0000000
--- a/content/posts/wifi-led-driver/images/lyza_case_raw.jpg
+++ /dev/null
diff --git a/content/posts/wifi-led-driver/images/lyza_case_raw.small.jpg b/content/posts/wifi-led-driver/images/lyza_case_raw.small.jpg
deleted file mode 100644
index a8d416e..0000000
--- a/content/posts/wifi-led-driver/images/lyza_case_raw.small.jpg
+++ /dev/null
diff --git a/content/posts/wifi-led-driver/index.rst b/content/posts/wifi-led-driver/index.rst
index 0cc27c9..8e8b24d 100644
--- a/content/posts/wifi-led-driver/index.rst
+++ b/content/posts/wifi-led-driver/index.rst
@@ -10,7 +10,7 @@ Project motivation
 .. raw:: html
     
     <figure>
-        <img src="images/lyza_board_in_case.small.jpg">
+        <img src="images/board_in_case.small.jpg">
         <figcaption>The completed driver board installed in the 3D-printed case. This device can now be connected to
         12V and two segments of LED tape that can then be controlled trough Wifi. The ESP8266 module goes on the pin
         header on the left and was removed for this picture.
@@ -53,7 +53,7 @@ currents their `trip times get long enough that they become unlikely to trip in
             <figcaption>
             The schematic of the driver board, with the ESP8266 on the top left, the STM32 microcontroller for LED
             modulation below, the shift register in the middle and the LED drivers and outputs on the right. 
-            <a href="resource/lyza_schematic_and_pcb.pdf">Download PDF</a>
+            <a href="resource/schematic_and_pcb.pdf">Download PDF</a>
             </figcaption>
         </figure><figure class="side-by-side">
             <img src="images/layout.png">
@@ -63,7 +63,7 @@ currents their `trip times get long enough that they become unlikely to trip in
             with one connector per LED tape segment. The power input connector is on the bottom right. The LED driver
             MOSFETs are in small SOT-23 packages on the back of the board. Since this board is not intended for
             super-high currents, the MOSFETs are adequately cooled just through the board's copper planes.
-            <a href="resource/lyza_schematic_and_pcb.pdf">Download PDF</a>
+            <a href="resource/schematic_and_pcb.pdf">Download PDF</a>
             </figcaption>
         </figure>
     </figure>
@@ -71,7 +71,7 @@ currents their `trip times get long enough that they become unlikely to trip in
 .. raw:: html
     
     <figure>
-        <img src="images/lyza_boards.small.jpg">
+        <img src="images/boards.small.jpg">
         <figcaption>The completed PCBs of this project (front) and the `multichannel LED driver`_ project the driver
         circuitry was derived from (back).
         </figcaption>
@@ -121,23 +121,6 @@ unless you're on a beefy machine or interrupt it when it starts auto-rendering t
 The board is mounted into the enclosure using knurled insert nuts that are pressed into a 3D-printed hole using a bit of
 violence.
 
-.. FIXME openscad screenshot
-.. FIXME enclosure parts
-.. FIXME finished enclosure with board inside
-
-.. raw:: html
-
-    <figure>
-        <figure class="side-by-side">
-            <img src="images/lyza_case_raw.small.jpg">
-            <figcaption>The 3D-printed case with threaded inserts before painting.</figcaption>
-        </figure><figure class="side-by-side">
-            <img src="images/lyza_case_complete.small.jpg">
-            <figcaption>The 3D-printed case with the board installed after painting. This was my first attempt at
-            painting a 3D-printed case so it looks pretty bad.</figcaption>
-        </figure>
-    </figure>
-
 .. _`multichannel LED driver`: {{<ref "posts/multichannel-led-driver/index.rst">}}
 .. _`LED characterization`: {{<ref "posts/led-characterization/index.rst">}}
 .. _ESP8266: https://en.wikipedia.org/wiki/ESP8266