deploy.py auto-commit

author: jaseg <git@jaseg.de> 2023-10-14 17:43:54 +0200
committer: jaseg <git@jaseg.de> 2023-10-14 17:43:54 +0200
commit: ab0eb2b834856c19a195c98435c4525fba08376a (patch)
tree: b962891099a5393219116703c729d7fc7c5b2d11 /blog/wifi-led-driver/index.html
parent: 29f6e652de5fffa990d5786131b6760a56785442 (diff)
parent: 3a636e545bc258ba3ecec3ede8b31ac113309313 (diff)
download: blog-ab0eb2b834856c19a195c98435c4525fba08376a.tar.gz
blog-ab0eb2b834856c19a195c98435c4525fba08376a.tar.bz2
blog-ab0eb2b834856c19a195c98435c4525fba08376a.zip
1 files changed, 146 insertions, 0 deletions
diff --git a/blog/wifi-led-driver/index.html b/blog/wifi-led-driver/index.html
new file mode 100644
index 0000000..7df1f28
--- /dev/null
+++ b/blog/wifi-led-driver/index.html
@@ -0,0 +1,146 @@
+<!DOCTYPE html>
+<html><head>
+    <meta charset="utf-8">
+    <title>Wifi Led Driver | Home</title>
+    <meta name="description" content="">
+    <meta name="viewport" content="width=device-width, initial-scale=1">
+    <meta name="mobile-web-app-capable" content="yes">
+    <meta name="color-scheme" content="dark light">
+    <link rel="stylesheet" href="/style.css">
+</head>
+<body><nav>
+    <div class="internal">
+        
+        <a href="/" title="Home">Home</a>
+        <a href="/blog/" title="Blog">Blog</a>
+        <a href="/projects/" title="Projects">Projects</a>
+        <a href="/about/" title="About">About</a>
+    </div>
+    <div class="external">
+        <a href="https://git.jaseg.de/" title="cgit">cgit</a>
+        <a href="https://github.com/jaseg" title="Github">Github</a>
+        <a href="https://gitlab.com/neinseg" title="Gitlab">Gitlab</a>
+        <a href="https://chaos.social/@jaseg" title="Mastodon">Mastodon</a>
+    </span>
+</nav>
+
+    <header>
+        <h1>Wifi Led Driver</h1>
+<ul class="breadcrumbs">
+    <li><a href="/">jaseg.de</a></li>
+    <li><a href="/blog/">Blog</a></li><li><a href="/blog/wifi-led-driver/">Wifi Led Driver</a></li>
+</ul>
+ <strong>2018-05-02</strong>
+    </header>
+    <main>
+        <div class="document">
+
+
+<div class="section" id="project-motivation">
+<h2>Project motivation</h2>
+<!-- FIXME finished project picture with LED tape -->
+<figure>
+    <img src="images/board_in_case.small.jpg">
+    <figcaption>The completed driver board installed in the 3D-printed case. This device can now be connected to
+    12V and two segments of LED tape that can then be controlled trough Wifi. The ESP8266 module goes on the pin
+    header on the left and was removed for this picture.
+    </figcaption>
+</figure><p>After the <a class="reference external" href="http://jaseg.de/blog/multichannel-led-driver/">multichannel LED driver</a> was completed, I was just getting used to controlling LEDs at 14-bit resolution.
+I liked the board we designed in this project, but at 32 channels it was a bit large for most use cases. Sometimes I
+just want to pop a piece of LED tape or two somewhere, but I don't need a full 32 channels of control. I ended up
+thinking that a smaller version of the 32-channel driver that didn't require a separate control computer would be
+handy. So I sat down and designed a variant of the design with only 8 channels instead of 32 and an on-board <a class="reference external" href="https://en.wikipedia.org/wiki/ESP8266">ESP8266</a>
+module instead of the <a class="reference external" href="https://en.wikipedia.org/wiki/RS-485">RS485</a> transceiver for WiFi connectivity.</p>
+</div>
+<div class="section" id="the-electronics">
+<h2>The Electronics</h2>
+<p>The schematic was mostly copy-pasted from the 32-channel design. The PCB was designed from scratch. This time, I went
+for a 5x7cm form factor to allow for enough room for all connectors and to give the <a class="reference external" href="https://en.wikipedia.org/wiki/ESP8266">ESP8266</a>'s WiFi antenna enough
+space. The board has two 5-pin <a class="reference external" href="https://www.phoenixcontact.com/online/portal/de?uri=pxc-oc-itemdetail:pid=1757019&amp;library=dede&amp;tab=1">Phoenix-style</a> for two RGB-White (RGBW) tapes and one 2-pin <a class="reference external" href="https://www.phoenixcontact.com/online/portal/de?uri=pxc-oc-itemdetail:pid=1757019&amp;library=dede&amp;tab=1">Phoenix-style</a> connector for
+12V power input. The control circuitry and the serial protocol are unchanged, but the <a class="reference external" href="http://www.st.com/resource/en/datasheet/stm32f030f4.pdf">STM32</a> now talks to an <a class="reference external" href="http://www.watterott.com/de/ESP8266-WiFi-Serial-Transceiver-Modul">ESP-01</a>
+module running custom firmware.</p>
+<p>The LEDs are driven using a <a class="reference external" href="http://www.ti.com/lit/ds/symlink/sn74hc595.pdf">74HC595</a> shift register controlling a bunch of <a class="reference external" href="http://aosmd.com/pdfs/datasheet/AO3400.pdf">AO3400</a> <a class="reference external" href="https://en.wikipedia.org/wiki/MOSFET">MOSFETs</a>, with resistors in front of
+the <a class="reference external" href="https://en.wikipedia.org/wiki/MOSFET">MOSFETs</a>' gates to slow down the transitions a bit to reduce brighntess nonlinearities and <a class="reference external" href="https://en.wikipedia.org/wiki/Electromagnetic_interference">EMI</a> resulting from
+ringing of the LED tape's wiring inductance.</p>
+<p>The board has two spots for either <a class="reference external" href="https://en.wikipedia.org/wiki/Resettable_fuse">self-resettable fuses (polyfuses)</a> or regular melting-wire <a class="reference external" href="https://en.wikipedia.org/wiki/Fuse_(electrical)">fuses</a> in
+a small <a class="reference external" href="https://en.wikipedia.org/wiki/Surface-mount_technology">SMD</a> package, one for each RGBW output. For low currents the self-resettable fuses should be okay but at higher
+currents their <a class="reference external" href="http://m.littelfuse.com/~/media/electronics/datasheets/resettable_ptcs/littelfuse_ptc_16r_datasheet.pdf.pdf">trip times get long enough that they become unlikely to trip in time to save anything</a>, so plain old non-resettable fuses would be the way to go there.</p>
+<!-- FIXME finished board photos -->
+<!-- FIXME board with test tape picture -->
+<div class="subfigure">
+    <figure>
+        <img src="images/schematic.png">
+        <figcaption>
+        The schematic of the driver board, with the ESP8266 on the top left, the STM32 microcontroller for LED
+        modulation below, the shift register in the middle and the LED drivers and outputs on the right.
+        <a href="resource/schematic_and_pcb.pdf">Download PDF</a>
+        </figcaption>
+    </figure>
+    <figure>
+        <img src="images/layout.png">
+        <figcaption>
+        The board layout with the top side being visible. The top side contains the footprint for the ESP8266, the
+        microcontroller, fuses, filter cap, connectors and the shift register. The LEDs are connected on the left,
+        with one connector per LED tape segment. The power input connector is on the bottom right. The LED driver
+        MOSFETs are in small SOT-23 packages on the back of the board. Since this board is not intended for
+        super-high currents, the MOSFETs are adequately cooled just through the board's copper planes.
+        <a href="resource/schematic_and_pcb.pdf">Download PDF</a>
+        </figcaption>
+    </figure>
+</div><figure>
+    <img src="images/boards.small.jpg">
+    <figcaption>The completed PCBs of this project (front) and the `multichannel LED driver`_ project the driver
+    circuitry was derived from (back).
+    </figcaption>
+</figure></div>
+<div class="section" id="the-firmware">
+<h2>The Firmware</h2>
+<p>The <a class="reference external" href="http://www.st.com/resource/en/datasheet/stm32f030f4.pdf">STM32</a> firmware only had to be slightly modified to accomodate the reduced channel count since the protocol remains
+unchanged. The ESP firmware is based on <a class="reference external" href="https://github.com/Spritetm/esphttpd">esphttpd</a> by <a class="reference external" href="http://spritesmods.com/">Spritetm</a>. The modifications to the webserver firmware are pretty
+basic. First, the UART console has been disabled since I use the UART to talk to the STM32. The few bootloader messages
+popping out the UART on boot are not an issue, since they're unlikely to contain the fixed 32-bit address prefix the
+serial protocol requires for the <a class="reference external" href="http://www.st.com/resource/en/datasheet/stm32f030f4.pdf">STM32</a> to do anything.</p>
+<p>Second, I added LED control by adding drivers for the serial protocol and a bunch of colorspace conversion functions.
+When I first tested the prototype software, I noticed that color reproduction was extremely poor. When I just sent a
+<a class="reference external" href="https://en.wikipedia.org/wiki/HSL_and_HSV">HSV</a> rainbow fade from a python command line, the result looked totally wrong. The fade did not seem to go at a constant
+speed and some colors, in particular yellow, orange and greens, were not visible at all. The problem turned out to be a
+stark mismatch of the red, green and blue channels of the LED tape and less-than-optimal color reproduction of the pure
+colors. I decided to properly measure the LED tape's color reproduction so I could compensate for it in software. This
+turned out to be an extremely interesting project, the details of which you can read in my <a class="reference external" href="http://jaseg.de/blog/led-characterization/">LED characterization</a>
+article.</p>
+<p>Third, I updated the built-in websites with some ad-hoc documentation on how to use the thing and a basic interface for
+LED control.</p>
+<!-- FIXME screenshot of firmware website -->
+</div>
+<div class="section" id="making-an-enclosure">
+<h2>Making an enclosure</h2>
+<p>To be actually useful, the driver needed a robust enclosure. Bare PCBs are nice for prototyping, but for actually
+putting the thing anywhere it needs a case to protect it against random destruction.</p>
+<p>The board has four mounting holes with comfortable spacing in its corners to allow easy mounting inside a 3D-printed
+case. The case itself is described in an <a class="reference external" href="http://www.openscad.org/">OpenSCAD</a> script. To make it look a little nicer, a little 3D relief is laid
+into the lid. The 3D relief is generated with a bit of blender magic. The source <a class="reference external" href="https://en.wikipedia.org/wiki/STL_(file_format)">STL</a> model is loaded into blender, then
+blender's amazingly flexible rendering system is used to export a depth map of a projection of the model as a <a class="reference external" href="https://en.wikipedia.org/wiki/Portable_Network_Graphics">PNG</a> file.
+This depth map is then imported as a triangle mesh into <a class="reference external" href="http://www.openscad.org/">OpenSCAD</a>.</p>
+<p>For the relief to look good, I chose a rather high resolution for the depth map. This unfortunately leads to extreme
+memory use and processing time on the part of <a class="reference external" href="http://www.openscad.org/">OpenSCAD</a>, but since I have access to a sufficiently fast machine that is
+not a problem. Just be careful if you try opening the <a class="reference external" href="http://www.openscad.org/">OpenSCAD</a> file on your machine, <a class="reference external" href="http://www.openscad.org/">OpenSCAD</a> will probably crash
+unless you're on a beefy machine or interrupt it when it starts auto-rendering the file.</p>
+<p>The board is mounted into the enclosure using knurled insert nuts that are pressed into a 3D-printed hole using a bit of
+violence.</p>
+</div>
+</div>
+    </main><footer>
+    Copyright © 2023 Jan Sebastian Götte
+    / <a href="/about/">About</a>
+    / <a href="/imprint/">Imprint</a>
+</footer>
+<script>
+            if(navigator.getEnvironmentIntegrity!==undefined)document.querySelector('body').innerHTML=`<h1>Your browser
+            contains Google DRM</h1>"Web Environment Integrity" is a Google euphemism for a DRM that is designed to
+            prevent ad-blocking, and which Google has forced into their browsers against widespread public opposition.
+                In support of an open web, this website does not function with this DRM. Please install a browser such
+            as <a href="https://www.mozilla.org/en-US/firefox/new/">Firefox</a> that respects your freedom and supports
+            ad blockers.`;
+        </script>
+    </body>
+</html>
author	jaseg <git@jaseg.de>	2023-10-14 17:43:54 +0200
committer	jaseg <git@jaseg.de>	2023-10-14 17:43:54 +0200
commit	ab0eb2b834856c19a195c98435c4525fba08376a (patch)
tree	b962891099a5393219116703c729d7fc7c5b2d11 /blog/wifi-led-driver/index.html
parent	29f6e652de5fffa990d5786131b6760a56785442 (diff)
parent	3a636e545bc258ba3ecec3ede8b31ac113309313 (diff)
download	blog-ab0eb2b834856c19a195c98435c4525fba08376a.tar.gz blog-ab0eb2b834856c19a195c98435c4525fba08376a.tar.bz2 blog-ab0eb2b834856c19a195c98435c4525fba08376a.zip