From f6b959086671fb1bf8b2003d5c5384c7311a7735 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Tue, 16 Apr 2019 23:38:46 +0900
Subject: center/fw: rename

---
 fw/main.c | 201 --------------------------------------------------------------
 1 file changed, 201 deletions(-)
 delete mode 100644 fw/main.c

(limited to 'fw/main.c')

diff --git a/fw/main.c b/fw/main.c
deleted file mode 100644
index 2340ecb..0000000
--- a/fw/main.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/* Megumin LED display firmware
- * Copyright (C) 2018 Sebastian Götte <code@jaseg.net>
- * 
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "global.h"
-
-#include "adc.h"
-
-volatile unsigned int sys_time = 0;
-volatile unsigned int sys_time_seconds = 0;
-
-void TIM1_BRK_UP_TRG_COM_Handler() {
-    TIM1->SR &= ~TIM_SR_UIF_Msk;
-}
-
-enum packet_type {
-    PKT_TYPE_RESERVED = 0,
-    PKT_TYPE_SET_OUTPUTS_BINARY = 1,
-    PKT_TYPE_SET_GLOBAL_BRIGHTNESS = 2,
-    PKT_TYPE_SET_OUTPUTS = 3,
-    PKT_TYPE_MAX
-};
-
-struct {
-    struct command_if_def cmd_if;
-    int payload_len[PKT_TYPE_MAX];
-} cmd_if = {{.packet_type_max=PKT_TYPE_MAX}, {
-    [PKT_TYPE_RESERVED] = 0,
-    [PKT_TYPE_SET_OUTPUTS_BINARY] = 1,
-    [PKT_TYPE_SET_GLOBAL_BRIGHTNESS] = 1,
-    [PKT_TYPE_SET_OUTPUTS] = 8 }
-};
-
-void set_drv_gpios(uint8_t val) {
-    int a=!!(val&1), b=!!(val&2), c=!!(val&4), d=!!(val&8);
-    GPIOA->ODR &= ~(!a<<3 | !b<<7 | c<<6 | d<<4);
-    GPIOA->ODR |= a<<3 | b<<7 | !c<<6 | !d<<4;
-}
-
-uint8_t out_state = 0x01;
-void set_outputs(uint8_t val[8]) {
-    /* TODO implement BCM for digital brightness control */
-    int x = 0;
-    for (int i=0; i<8; i++)
-        if (val[i] > 127)
-            x |= 1<<i;
-    out_state = x;
-}
-
-void set_outputs_binary(int mask, int global_brightness) {
-    uint8_t val[8];
-    for (int i=0; i<8; i++)
-        val[i] = (mask & (1<<i)) ? global_brightness : 0;
-    set_outputs(val);
-}
-
-void blank(void) {
-    set_drv_gpios(0);
-}
-
-volatile int bit; /* FIXME */
-void unblank_low(void) {
-    if (bit)
-        set_drv_gpios(out_state & 0xf);
-    else
-        set_drv_gpios(out_state >> 4);
-}
-
-void TIM3_IRQHandler(void) {
-    GPIOA->BSRR = 1<<10;
-    if (TIM3->SR & TIM_SR_UIF)
-        unblank_low();
-    else
-        blank();
-
-    TIM3->SR = 0;
-    GPIOA->BRR = 1<<10;
-}
-
-void handle_command(int command, uint8_t *args) {
-    static int global_brightness = 0xff;
-    switch (command) {
-        case PKT_TYPE_SET_OUTPUTS_BINARY:
-            set_outputs_binary(args[0], global_brightness);
-            break;
-
-        case PKT_TYPE_SET_GLOBAL_BRIGHTNESS:
-            global_brightness = args[0];
-            break;
-
-        case PKT_TYPE_SET_OUTPUTS:
-            set_outputs(args);
-            break;
-    }
-}
-
-int main(void) {
-    RCC->CR |= RCC_CR_HSEON;
-    while (!(RCC->CR&RCC_CR_HSERDY));
-    RCC->CFGR &= ~RCC_CFGR_PLLMUL_Msk & ~RCC_CFGR_SW_Msk & ~RCC_CFGR_PPRE_Msk & ~RCC_CFGR_HPRE_Msk;
-    RCC->CFGR |= ((6-2)<<RCC_CFGR_PLLMUL_Pos) | RCC_CFGR_PLLSRC_HSE_PREDIV; /* PLL x6 -> 48.0MHz */
-    RCC->CR |= RCC_CR_PLLON;
-    while (!(RCC->CR&RCC_CR_PLLRDY));
-    RCC->CFGR |= (2<<RCC_CFGR_SW_Pos);
-    SystemCoreClockUpdate();
-    //SysTick_Config(SystemCoreClock/1000); /* 1ms interval */
-
-    /* Turn on lots of neat things */
-    RCC->AHBENR  |= RCC_AHBENR_DMAEN | RCC_AHBENR_GPIOAEN | RCC_AHBENR_FLITFEN;
-    RCC->APB2ENR |= RCC_APB2ENR_SYSCFGEN | RCC_APB2ENR_ADCEN| RCC_APB2ENR_DBGMCUEN | RCC_APB2ENR_TIM1EN | RCC_APB2ENR_TIM1EN;;
-    RCC->APB1ENR |= RCC_APB1ENR_TIM3EN;
-
-    /* TIM3 foo */
-    TIM3->CCMR2 = (6<<TIM_CCMR2_OC4M_Pos); /* PWM Mode 1 to get a clean trigger signal */
-    TIM3->CCER  = TIM_CCER_CC4E; /* Enable capture/compare unit 4 connected to ADC */
-
-    TIM3->PSC   =  48-1;
-    TIM3->CCR4  = 170-1;
-    TIM3->ARR   = 200-1;
-
-    TIM3->DIER |= TIM_DIER_UIE | TIM_DIER_CC4IE;
-
-    TIM3->CR1  |= TIM_CR1_CEN;
-    NVIC_EnableIRQ(TIM3_IRQn);
-    NVIC_SetPriority(TIM3_IRQn, 3<<5);
-
-    GPIOA->MODER |=
-          (0<<GPIO_MODER_MODER0_Pos)  /* PA0  - Vmeas_A to ADC */
-        | (0<<GPIO_MODER_MODER1_Pos)  /* PA1  - Vmeas_B to ADC */
-        | (1<<GPIO_MODER_MODER2_Pos)  /* PA2  - LOAD */
-        | (1<<GPIO_MODER_MODER3_Pos)  /* PA3  - CH0 */
-        | (1<<GPIO_MODER_MODER4_Pos)  /* PA4  - CH3 */
-        | (1<<GPIO_MODER_MODER5_Pos)  /* PA5  - TP1 */
-        | (1<<GPIO_MODER_MODER6_Pos)  /* PA6  - CH2 */
-        | (1<<GPIO_MODER_MODER7_Pos)  /* PA7  - CH1 */
-        | (1<<GPIO_MODER_MODER9_Pos)  /* PA9  - TP2 */
-        | (1<<GPIO_MODER_MODER10_Pos);/* PA10 - TP3 */
-
-    /* Set shift register IO GPIO output speed */
-    GPIOA->OSPEEDR |=
-          (2<<GPIO_OSPEEDR_OSPEEDR2_Pos)   /* LOAD */
-        | (2<<GPIO_OSPEEDR_OSPEEDR3_Pos)   /* CH0 */
-        | (2<<GPIO_OSPEEDR_OSPEEDR4_Pos)   /* CH3   */
-        | (2<<GPIO_OSPEEDR_OSPEEDR6_Pos)   /* CH2 */
-        | (2<<GPIO_OSPEEDR_OSPEEDR7_Pos);  /* CH1 */
-
-    set_drv_gpios(0);
-
-	adc_configure_monitor_mode(&cmd_if.cmd_if, 20 /*us*/);
-
-    while (42) {
-        int new = GPIOA->IDR & (1<<0);
-        if (new != bit) {
-            bit = new;
-            TIM3->EGR  |= TIM_EGR_UG;
-            unblank_low();
-        }
-        /* idle */
-    }
-}
-
-void NMI_Handler(void) {
-    asm volatile ("bkpt");
-}
-
-void HardFault_Handler(void) __attribute__((naked));
-void HardFault_Handler() {
-    asm volatile ("bkpt");
-}
-
-void SVC_Handler(void) {
-    asm volatile ("bkpt");
-}
-
-
-void PendSV_Handler(void) {
-    asm volatile ("bkpt");
-}
-
-void SysTick_Handler(void) {
-    static int n = 0;
-    sys_time++;
-    if (n++ == 1000) {
-        n = 0;
-        sys_time_seconds++;
-    }
-}
-
-- 
cgit