1 files changed, 0 insertions, 379 deletions
diff --git a/driver_fw/startup_stm32f103xb.s b/driver_fw/startup_stm32f103xb.s
deleted file mode 100644
index 1bdd524..0000000
--- a/driver_fw/startup_stm32f103xb.s
+++ /dev/null
@@ -1,379 +0,0 @@
-/**
-  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
-  * @file      startup_stm32f103xb.s
-  * @author    MCD Application Team
-  * @version   V4.2.0
-  * @date      31-March-2017
-  * @brief     STM32F103xB Devices vector table for Atollic toolchain.
-  *            This module performs:
-  *                - Set the initial SP
-  *                - Set the initial PC == Reset_Handler,
-  *                - Set the vector table entries with the exceptions ISR address
-  *                - Configure the clock system   
-  *                - Branches to main in the C library (which eventually
-  *                  calls main()).
-  *            After Reset the Cortex-M3 processor is in Thread mode,
-  *            priority is Privileged, and the Stack is set to Main.
-  ******************************************************************************
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-  .syntax unified
-  .cpu cortex-m3
-  .fpu softvfp
-  .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-.equ  BootRAM, 0xF108F85F
-/**
- * @brief  This is the code that gets called when the processor first
- *          starts execution following a reset event. Only the absolutely
- *          necessary set is performed, after which the application
- *          supplied main() routine is called.
- * @param  None
- * @retval : None
-*/
-
-  .section .text.Reset_Handler
-  .weak Reset_Handler
-  .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
-  movs r1, #0
-  b LoopCopyDataInit
-
-CopyDataInit:
-  ldr r3, =_sidata
-  ldr r3, [r3, r1]
-  str r3, [r0, r1]
-  adds r1, r1, #4
-
-LoopCopyDataInit:
-  ldr r0, =_sdata
-  ldr r3, =_edata
-  adds r2, r0, r1
-  cmp r2, r3
-  bcc CopyDataInit
-  ldr r2, =_sbss
-  b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
-  movs r3, #0
-  str r3, [r2], #4
-
-LoopFillZerobss:
-  ldr r3, = _ebss
-  cmp r2, r3
-  bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
-    bl  SystemInit
-/* Call static constructors */
-    bl __libc_init_array
-/* Call the application's entry point.*/
-  bl main
-  bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief  This is the code that gets called when the processor receives an
- *         unexpected interrupt.  This simply enters an infinite loop, preserving
- *         the system state for examination by a debugger.
- *
- * @param  None
- * @retval : None
-*/
-    .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
-  b Infinite_Loop
-  .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3.  Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
-  .section .isr_vector,"a",%progbits
-  .type g_pfnVectors, %object
-  .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-
-  .word _estack
-  .word Reset_Handler
-  .word NMI_Handler
-  .word HardFault_Handler
-  .word MemManage_Handler
-  .word BusFault_Handler
-  .word UsageFault_Handler
-  .word 0
-  .word 0
-  .word 0
-  .word 0
-  .word SVC_Handler
-  .word DebugMon_Handler
-  .word 0
-  .word PendSV_Handler
-  .word SysTick_Handler
-  .word WWDG_IRQHandler
-  .word PVD_IRQHandler
-  .word TAMPER_IRQHandler
-  .word RTC_IRQHandler
-  .word FLASH_IRQHandler
-  .word RCC_IRQHandler
-  .word EXTI0_IRQHandler
-  .word EXTI1_IRQHandler
-  .word EXTI2_IRQHandler
-  .word EXTI3_IRQHandler
-  .word EXTI4_IRQHandler
-  .word DMA1_Channel1_IRQHandler
-  .word DMA1_Channel2_IRQHandler
-  .word DMA1_Channel3_IRQHandler
-  .word DMA1_Channel4_IRQHandler
-  .word DMA1_Channel5_IRQHandler
-  .word DMA1_Channel6_IRQHandler
-  .word DMA1_Channel7_IRQHandler
-  .word ADC1_2_IRQHandler
-  .word USB_HP_CAN1_TX_IRQHandler
-  .word USB_LP_CAN1_RX0_IRQHandler
-  .word CAN1_RX1_IRQHandler
-  .word CAN1_SCE_IRQHandler
-  .word EXTI9_5_IRQHandler
-  .word TIM1_BRK_IRQHandler
-  .word TIM1_UP_IRQHandler
-  .word TIM1_TRG_COM_IRQHandler
-  .word TIM1_CC_IRQHandler
-  .word TIM2_IRQHandler
-  .word TIM3_IRQHandler
-  .word TIM4_IRQHandler
-  .word I2C1_EV_IRQHandler
-  .word I2C1_ER_IRQHandler
-  .word I2C2_EV_IRQHandler
-  .word I2C2_ER_IRQHandler
-  .word SPI1_IRQHandler
-  .word SPI2_IRQHandler
-  .word USART1_IRQHandler
-  .word USART2_IRQHandler
-  .word USART3_IRQHandler
-  .word EXTI15_10_IRQHandler
-  .word RTC_Alarm_IRQHandler
-  .word USBWakeUp_IRQHandler
-  .word 0
-  .word 0
-  .word 0
-  .word 0
-  .word 0
-  .word 0
-  .word 0
-  .word BootRAM          /* @0x108. This is for boot in RAM mode for
-                            STM32F10x Medium Density devices. */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
-  .weak NMI_Handler
-  .thumb_set NMI_Handler,Default_Handler
-
-  .weak HardFault_Handler
-  .thumb_set HardFault_Handler,Default_Handler
-
-  .weak MemManage_Handler
-  .thumb_set MemManage_Handler,Default_Handler
-
-  .weak BusFault_Handler
-  .thumb_set BusFault_Handler,Default_Handler
-
-  .weak UsageFault_Handler
-  .thumb_set UsageFault_Handler,Default_Handler
-
-  .weak SVC_Handler
-  .thumb_set SVC_Handler,Default_Handler
-
-  .weak DebugMon_Handler
-  .thumb_set DebugMon_Handler,Default_Handler
-
-  .weak PendSV_Handler
-  .thumb_set PendSV_Handler,Default_Handler
-
-  .weak SysTick_Handler
-  .thumb_set SysTick_Handler,Default_Handler
-
-  .weak WWDG_IRQHandler
-  .thumb_set WWDG_IRQHandler,Default_Handler
-
-  .weak PVD_IRQHandler
-  .thumb_set PVD_IRQHandler,Default_Handler
-
-  .weak TAMPER_IRQHandler
-  .thumb_set TAMPER_IRQHandler,Default_Handler
-
-  .weak RTC_IRQHandler
-  .thumb_set RTC_IRQHandler,Default_Handler
-
-  .weak FLASH_IRQHandler
-  .thumb_set FLASH_IRQHandler,Default_Handler
-
-  .weak RCC_IRQHandler
-  .thumb_set RCC_IRQHandler,Default_Handler
-
-  .weak EXTI0_IRQHandler
-  .thumb_set EXTI0_IRQHandler,Default_Handler
-
-  .weak EXTI1_IRQHandler
-  .thumb_set EXTI1_IRQHandler,Default_Handler
-
-  .weak EXTI2_IRQHandler
-  .thumb_set EXTI2_IRQHandler,Default_Handler
-
-  .weak EXTI3_IRQHandler
-  .thumb_set EXTI3_IRQHandler,Default_Handler
-
-  .weak EXTI4_IRQHandler
-  .thumb_set EXTI4_IRQHandler,Default_Handler
-
-  .weak DMA1_Channel1_IRQHandler
-  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
-  .weak DMA1_Channel2_IRQHandler
-  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
-  .weak DMA1_Channel3_IRQHandler
-  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
-  .weak DMA1_Channel4_IRQHandler
-  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
-  .weak DMA1_Channel5_IRQHandler
-  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
-  .weak DMA1_Channel6_IRQHandler
-  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
-  .weak DMA1_Channel7_IRQHandler
-  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
-  .weak ADC1_2_IRQHandler
-  .thumb_set ADC1_2_IRQHandler,Default_Handler
-
-  .weak USB_HP_CAN1_TX_IRQHandler
-  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
-
-  .weak USB_LP_CAN1_RX0_IRQHandler
-  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
-
-  .weak CAN1_RX1_IRQHandler
-  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
-
-  .weak CAN1_SCE_IRQHandler
-  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
-
-  .weak EXTI9_5_IRQHandler
-  .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
-  .weak TIM1_BRK_IRQHandler
-  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
-
-  .weak TIM1_UP_IRQHandler
-  .thumb_set TIM1_UP_IRQHandler,Default_Handler
-
-  .weak TIM1_TRG_COM_IRQHandler
-  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
-
-  .weak TIM1_CC_IRQHandler
-  .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
-  .weak TIM2_IRQHandler
-  .thumb_set TIM2_IRQHandler,Default_Handler
-
-  .weak TIM3_IRQHandler
-  .thumb_set TIM3_IRQHandler,Default_Handler
-
-  .weak TIM4_IRQHandler
-  .thumb_set TIM4_IRQHandler,Default_Handler
-
-  .weak I2C1_EV_IRQHandler
-  .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
-  .weak I2C1_ER_IRQHandler
-  .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
-  .weak I2C2_EV_IRQHandler
-  .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
-  .weak I2C2_ER_IRQHandler
-  .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
-  .weak SPI1_IRQHandler
-  .thumb_set SPI1_IRQHandler,Default_Handler
-
-  .weak SPI2_IRQHandler
-  .thumb_set SPI2_IRQHandler,Default_Handler
-
-  .weak USART1_IRQHandler
-  .thumb_set USART1_IRQHandler,Default_Handler
-
-  .weak USART2_IRQHandler
-  .thumb_set USART2_IRQHandler,Default_Handler
-
-  .weak USART3_IRQHandler
-  .thumb_set USART3_IRQHandler,Default_Handler
-
-  .weak EXTI15_10_IRQHandler
-  .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
-  .weak RTC_Alarm_IRQHandler
-  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
-  .weak USBWakeUp_IRQHandler
-  .thumb_set USBWakeUp_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-