From 6b7518b29f81fcbc49cb6d1680b9c1e22793e270 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sat, 9 Dec 2017 15:06:51 +0100 Subject: Aux register loading further optimized --- fw/main.c | 114 ++++++++++++++++++++++++++++++-------------------------------- 1 file changed, 55 insertions(+), 59 deletions(-) (limited to 'fw') diff --git a/fw/main.c b/fw/main.c index 610e16f..adb7f2d 100644 --- a/fw/main.c +++ b/fw/main.c @@ -167,63 +167,20 @@ uint8_t segment_map[8] = {5, 7, 6, 4, 1, 3, 0, 2}; static volatile uint32_t aux_reg = 0; static volatile int frame_duration_us; volatile int nbits = MAX_BITS; -/* returns new bit time in cycles */ -int shift_data() { - static int active_segment = 0; - static unsigned int active_bit = 0; - static unsigned int last_frame_time; - /* Note: On boot, multiplexing will start with bit 1 due to the next few lines. This is perfectly ok. */ - active_bit++; - if (active_bit >= nbits) { - active_bit = 0; - - active_segment++; - if (active_segment == NSEGMENTS) { - active_segment = 0; - - /* FIXME remove this? - int time = stk_microseconds(); - frame_duration_us = time - last_frame_time; - last_frame_time = time; - */ - if (fb_op == FB_UPDATE) { - volatile struct framebuf *tmp = read_fb; - read_fb = write_fb; - write_fb = tmp; - fb_op = FB_WRITE; - } - } - - GPIOA->BSRR = GPIO_BSRR_BR_10; - SPI1->DR = aux_reg | segment_map[active_segment]; - while (SPI1->SR & SPI_SR_BSY); - GPIOA->BSRR = GPIO_BSRR_BS_10; - } - - uint32_t spi_word = read_fb->data[active_bit*FRAME_SIZE_WORDS + active_segment]; - SPI1->DR = spi_word>>16; - spi_word &= 0xFFFF; - while (!(SPI1->SR & SPI_SR_TXE)); - SPI1->DR = spi_word; - while (!(SPI1->SR & SPI_SR_TXE)); - //tick(); - //strobe_leds(); - // FIXME SPI1->CR2 |= SPI_CR2_TXEIE; - - return active_bit; -} - -#define NBITS_MAX 14 +static unsigned int active_bit = 0; +static int active_segment = 0; /* Bit timing base value. This is the lowes bit interval used */ #define PERIOD_BASE 4 /* This value is a constant offset added to every bit period to allow for the timer IRQ handler to execute. This is set * empirically using a debugger and a logic analyzer. */ -#define TIMER_CYCLES_FOR_SPI_TRANSMISSIONS 21 +#define TIMER_CYCLES_FOR_SPI_TRANSMISSIONS 13 + +#define TIMER_CYCLES_BEFORE_LED_STROBE 12 -#define TIMER_CYCLES_BEFORE_LED_STROBE 20 +#define AUX_SPI_PRETRIGGER 20 /* Defines for brevity */ #define A TIMER_CYCLES_FOR_SPI_TRANSMISSIONS @@ -235,7 +192,7 @@ int shift_data() { /* This lookup table maps bit positions to timer period values. This is a lookup table to allow for the compensation for * non-linear effects of ringing at lower bit durations. */ -static uint16_t timer_period_lookup[NBITS_MAX] = { +static uint16_t timer_period_lookup[MAX_BITS+1] = { /* LSB here */ A - C + (B<< 0), A - C + (B<< 1), @@ -247,10 +204,7 @@ static uint16_t timer_period_lookup[NBITS_MAX] = { A - C + (B<< 7), A - C + (B<< 8), A - C + (B<< 9), - A - C + (B<<10), - A - C + (B<<11), - A - C + (B<<12), - A - C + (B<<13), + A - C + (B<< 0), /* MSB here */ }; @@ -280,7 +234,9 @@ void cfg_timer3() { TIM1->BDTR = TIM_BDTR_MOE; TIM1->SMCR = (2< TIM3; slave mode: reset */ TIM1->CCMR1 = (6<CCER = TIM_CCER_CC2E; + TIM1->CCER = TIM_CCER_CC2E | TIM_CCER_CC1E; + TIM1->CCR1 = timer_period_lookup[nbits-1] - AUX_SPI_PRETRIGGER; + TIM1->DIER = TIM_DIER_CC1IE; TIM1->CCR2 = TIMER_CYCLES_BEFORE_LED_STROBE; TIM1->PSC = TIM3->PSC; /* 0.20us/tick */ TIM1->ARR = 0xffff; @@ -288,19 +244,59 @@ void cfg_timer3() { TIM1->CR1 = TIM_CR1_ARPE; TIM1->CR1 |= TIM_CR1_CEN; + NVIC_EnableIRQ(TIM1_CC_IRQn); + NVIC_SetPriority(TIM1_CC_IRQn, 3); + NVIC_EnableIRQ(TIM3_IRQn); NVIC_SetPriority(TIM3_IRQn, 2); } +void TIM1_CC_IRQHandler() { + GPIOA->BSRR = GPIO_BSRR_BS_0; // Debug + + active_bit = 0; + active_segment++; + if (active_segment == NSEGMENTS) { + active_segment = 0; + + /* FIXME remove this? + int time = stk_microseconds(); + frame_duration_us = time - last_frame_time; + last_frame_time = time; + */ + if (fb_op == FB_UPDATE) { + volatile struct framebuf *tmp = read_fb; + read_fb = write_fb; + write_fb = tmp; + fb_op = FB_WRITE; + } + } + + GPIOA->BSRR = GPIO_BSRR_BR_10; + SPI1->DR = aux_reg | segment_map[active_segment]; + + TIM1->SR &= ~TIM_SR_CC1IF_Msk; + GPIOA->BSRR = GPIO_BSRR_BR_0; // Debug +} + void TIM3_IRQHandler() { GPIOA->BSRR = GPIO_BSRR_BS_4; // Debug //TIM3->CR1 &= ~TIM_CR1_CEN_Msk; FIXME - int idx = shift_data(); - TIM3->ARR = timer_period_lookup[idx]; + GPIOA->BSRR = GPIO_BSRR_BS_10; + + /* Note: On boot, multiplexing will start with bit 1 due to the next few lines. This is perfectly ok. */ + uint32_t spi_word = read_fb->data[active_bit*FRAME_SIZE_WORDS + active_segment]; + SPI1->DR = spi_word>>16; + spi_word &= 0xFFFF; + while (!(SPI1->SR & SPI_SR_TXE)); + SPI1->DR = spi_word; + while (!(SPI1->SR & SPI_SR_TXE)); + + active_bit++; + TIM3->ARR = timer_period_lookup[active_bit]; TIM3->SR &= ~TIM_SR_UIF_Msk; - //TIM3->CR1 |= TIM_CR1_CEN; GPIOA->BSRR = GPIO_BSRR_BR_4; // Debug } @@ -417,7 +413,7 @@ int main(void) { | (2<