From 582e6d77861661991cac818f035a1c67a4d92f74 Mon Sep 17 00:00:00 2001 From: jaseg Date: Sun, 10 Dec 2017 15:59:56 +0100 Subject: Add discovery and addressing mechanism --- fw/Makefile | 2 +- fw/main.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++------------- fw/test.py | 43 ++++++++++++++++++++++++++++++++++-- 3 files changed, 99 insertions(+), 18 deletions(-) (limited to 'fw') diff --git a/fw/Makefile b/fw/Makefile index 29bfb15..0b4e3ab 100644 --- a/fw/Makefile +++ b/fw/Makefile @@ -61,7 +61,7 @@ sources.c: sources.tar.xz.zip xxd -i $< | head -n -1 | sed 's/=/__attribute__((section(".source_tarball"))) =/' > $@ # FIXME re-add sources.o -main.elf: main.o startup_stm32f030x6.o system_stm32f0xx.o $(HAL_PATH)/Src/stm32f0xx_ll_utils.o base.o cmsis_exports.o transpose.o bus_addr.o +main.elf: main.o startup_stm32f030x6.o system_stm32f0xx.o $(HAL_PATH)/Src/stm32f0xx_ll_utils.o base.o cmsis_exports.o transpose.o bus_addr.o mac.o $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) $(OBJCOPY) -O ihex $@ $(@:.elf=.hex) $(OBJCOPY) -O binary $@ $(@:.elf=.bin) diff --git a/fw/main.c b/fw/main.c index eac736f..ba644c1 100644 --- a/fw/main.c +++ b/fw/main.c @@ -15,6 +15,7 @@ #include #include "transpose.h" +#include "mac.h" /* * Part number: STM32F030F4C6 @@ -104,6 +105,7 @@ volatile union { struct __attribute__((packed)) { struct framebuf fb; uint8_t end[0]; } set_fb_rq; struct __attribute__((packed)) { uint8_t nbits; uint8_t end[0]; } set_nbits_rq; uint8_t byte_data[0]; + uint32_t mac_data; } rx_buf; volatile union { @@ -409,6 +411,7 @@ void uart_config(void) { #define LED_STRETCHING_MS 50 static volatile int error_led_timeout = 0; static volatile int comm_led_timeout = 0; +static volatile int id_led_timeout = 0; void trigger_error_led() { error_led_timeout = LED_STRETCHING_MS; @@ -418,32 +421,67 @@ void trigger_comm_led() { comm_led_timeout = LED_STRETCHING_MS; } +void trigger_id_led() { + id_led_timeout = LED_STRETCHING_MS; +} + /* Error counters for debugging */ static unsigned int overruns = 0; static unsigned int frame_overruns = 0; static unsigned int invalid = 0; +void tx_char(uint8_t c) { + while (!(USART1->ISR & USART_ISR_TC)); + USART1->TDR = c; +} + +void send_frame_formatted(uint8_t *buf, int len) { + uint8_t *p=buf, *q=buf, *end=buf+len; + do { + while (*q && q!=end) + q++; + tx_char(q-p+1); + while (*p && p!=end) + tx_char(*p++); + } while (p != end); + tx_char('\0'); +} + /* This is the higher-level protocol handler for the serial protocol. It gets passed the number of data bytes in this * frame (which may be zero) and returns a pointer to the buffer where the next frame should be stored. */ volatile uint8_t *packet_received(int len) { - static int protocol_state = 0; - /* Use zero-length frames as delimiters to synchronize this protocol layer */ - if (len == 0) { - protocol_state = 0; + static enum { + PROT_EXPECT_FRAME_FIRST_HALF = 0, + PROT_EXPECT_FRAME_SECOND_HALF = 1, + PROT_IGNORE = 2, + } protocol_state = PROT_IGNORE; + /* Use mac frames as delimiters to synchronize this protocol layer */ + trigger_comm_led(); + if (len == 0) { /* Discovery packet */ + if (sys_time < 100 && sys_time_seconds == 0) { /* Only respond during the first 100ms after boot */ + send_frame_formatted((uint8_t*)&device_mac, sizeof(device_mac)); + } + + } else if (len == 4) { /* Address packet */ + if (rx_buf.mac_data == device_mac) { /* we are addressed */ + protocol_state = PROT_EXPECT_FRAME_FIRST_HALF; /* start listening for frame buffer data */ + } else { /* we are not addressed */ + protocol_state = PROT_IGNORE; /* ignore packet */ + } } else if (len == sizeof(rx_buf.set_fb_rq)/2) { - if (protocol_state == 0) { /* First of two half-framebuffer data frames */ - protocol_state = 1; + if (protocol_state == PROT_EXPECT_FRAME_FIRST_HALF) { /* First of two half-framebuffer data frames */ + protocol_state = PROT_EXPECT_FRAME_SECOND_HALF; /* Return second half of receive buffer */ return rx_buf.byte_data + (sizeof(rx_buf.set_fb_rq)/2); - } else if (protocol_state == 1) { /* Second of two half-framebuffer data frames */ + } else if (protocol_state == PROT_EXPECT_FRAME_SECOND_HALF) { /* Second of two half-framebuffer data frames */ /* Kick off buffer transfer. This triggers the main loop to copy data out of the receive buffer and paste it * properly formatted into the frame buffer. */ if (fb_op == FB_WRITE) { fb_op = FB_FORMAT; - trigger_comm_led(); + trigger_id_led(); } else { /* FIXME An overrun happend. What should we do? */ frame_overruns++; @@ -451,14 +489,14 @@ volatile uint8_t *packet_received(int len) { } /* Go to "hang mode" until next zero-length packet. */ - protocol_state = 2; + protocol_state = PROT_IGNORE; } } else { /* FIXME An invalid packet has been received. What should we do? */ invalid++; trigger_error_led(); - protocol_state = 2; /* go into "hang mode" until next zero-length packet */ + protocol_state = PROT_IGNORE; /* go into "hang mode" until next zero-length packet */ } /* By default, return rx_buf.byte_data . This means if an invalid protocol state is reached ("hang mode"), the next @@ -720,10 +758,10 @@ int main(void) { int last_time = 0; while (42) { - /* Crude LED logic. The comm and error LEDs each have a timeout counter that is reset to the LED_STRETCHING_MS - * constant on an event (either a frame received correctly or some uart, framing or protocol error). These - * timeout counters count down in milliseconds and the LEDs are set while they are non-zero. This means a train - * of several very brief events will make the LED lit permanently. + /* Crude LED logic. The comm, id and error LEDs each have a timeout counter that is reset to the + * LED_STRETCHING_MS constant on an event (either a frame received correctly or some uart, framing or protocol + * error). These timeout counters count down in milliseconds and the LEDs are set while they are non-zero. This + * means a train of several very brief events will make the LED lit permanently. */ int time_now = sys_time; /* Latch sys_time here to avoid race conditions */ if (last_time != time_now) { @@ -737,7 +775,11 @@ int main(void) { if (comm_led_timeout < 0) comm_led_timeout = 0; - led_state = (led_state & ~3) | (!!error_led_timeout)<<1 | (!!comm_led_timeout)<<0; + id_led_timeout -= diff; + if (id_led_timeout < 0) + id_led_timeout = 0; + + led_state = (led_state & ~7) | (!!id_led_timeout)<<2 | (!!error_led_timeout)<<1 | (!!comm_led_timeout)<<0; last_time = time_now; } diff --git a/fw/test.py b/fw/test.py index 6836072..dab5482 100755 --- a/fw/test.py +++ b/fw/test.py @@ -1,5 +1,6 @@ #!/usr/bin/env python3 import serial +from itertools import takewhile def chunked(data, chunk_size): for i in range(0, len(data), chunk_size): @@ -29,15 +30,37 @@ def format_packet(data): out += bytes([1, 0, 0, 0]) # global intensity return out +def chariter(ser): + while True: + yield ser.read(1) + +def read_frame(ser): + return b''.join(takewhile(lambda c: c and c[0], chariter(ser))) + +def unstuff(data): + out = b'' + while data: + stuff = data[0] + if out: + out += b'\0' + out += data[1:stuff] + data = data[stuff:] + return out + +def receive_frame(ser): + return unstuff(read_frame(ser)) + if __name__ == '__main__': import argparse import time + import struct + from binascii import hexlify parser = argparse.ArgumentParser() parser.add_argument('serial') args = parser.parse_args() - ser = serial.Serial(args.serial, 2000000) + ser = serial.Serial(args.serial, 2000000, timeout=0.05) frame_len = 4*8*8 black, red = [0]*frame_len, [255]*frame_len @@ -49,10 +72,26 @@ if __name__ == '__main__': #frames = [red, black]*5 #frames = [ x for l in [[([0]*i+[255]+[0]*(7-i))*32]*2 for i in range(8)] for x in l ] + found_macs = set() + while True: + ser.write(b'\0') + frame = receive_frame(ser) + if len(frame) == 4: + mac, = struct.unpack('