From a70ad99b36b5212525cc6c1957802d3eab8e0d99 Mon Sep 17 00:00:00 2001
From: jaseg <git@jaseg.net>
Date: Sun, 10 Dec 2017 20:17:51 +0100
Subject: Make status request work, fix uc-side cobs encoding bug

---
 fw/main.c                         | 111 +++++++++++++++++++++-----------------
 fw/test.py                        |  38 +++++++++++--
 hw/chibi/chibi_2024/bom-chibi.ods | Bin 28137 -> 28559 bytes
 3 files changed, 96 insertions(+), 53 deletions(-)

diff --git a/fw/main.c b/fw/main.c
index ba644c1..50c9cfa 100644
--- a/fw/main.c
+++ b/fw/main.c
@@ -83,8 +83,8 @@ void strobe_leds(void) {
     GPIOA->BSRR = GPIO_BSRR_BR_9;
 }
 
-#define FIRMWARE_VERSION 1
-#define HARDWARE_VERSION 1
+#define FIRMWARE_VERSION 2
+#define HARDWARE_VERSION 4
 
 #define TS_CAL1 (*(uint16_t *)0x1FFFF7B8)
 #define VREFINT_CAL (*(uint16_t *)0x1FFFF7BA)
@@ -108,23 +108,6 @@ volatile union {
     uint32_t mac_data;
 } rx_buf;
 
-volatile union {
-    struct { uint32_t magic;    } ping_reply;
-    struct __attribute__((packed)) {
-        uint8_t  firmware_version,
-                 hardware_version,
-                 digit_rows,
-                 digit_cols;
-        uint32_t uptime;
-        uint32_t millifps;
-         int16_t vcc_mv,
-                 temp_tenth_celsius;
-        uint8_t  nbits;
-    } desc_reply;
-} tx_buf;
-
-extern uint8_t bus_addr;
-
 #define LED_COMM     0x0001
 #define LED_ERROR    0x0002
 #define LED_ID       0x0004
@@ -372,14 +355,6 @@ void TIM3_IRQHandler() {
     GPIOA->BSRR = GPIO_BSRR_BR_0; // Debug
 }
 
-enum Command {
-    CMD_PING,
-    CMD_SET_FB,
-    CMD_SET_NBITS,
-    CMD_GET_DESC,
-    N_CMDS
-};
-
 void uart_config(void) {
     USART1->CR1 = /* 8-bit -> M1, M0 clear */
         /* RTOIE clear */
@@ -426,9 +401,9 @@ void trigger_id_led() {
 }
 
 /* Error counters for debugging */
-static unsigned int overruns = 0;
+static unsigned int uart_overruns = 0;
 static unsigned int frame_overruns = 0;
-static unsigned int invalid = 0;
+static unsigned int invalid_frames = 0;
 
 void tx_char(uint8_t c) {
     while (!(USART1->ISR & USART_ISR_TC));
@@ -443,16 +418,51 @@ void send_frame_formatted(uint8_t *buf, int len) {
         tx_char(q-p+1);
         while (*p && p!=end)
             tx_char(*p++);
-    } while (p != end);
+        p++, q++;
+    } while (p < end);
     tx_char('\0');
 }
 
+union {
+    struct __attribute__((packed)) {
+        uint8_t  firmware_version,
+                 hardware_version,
+                 digit_rows,
+                 digit_cols;
+        uint32_t uptime_s,
+                 framerate_millifps,
+                 uart_overruns,
+                 frame_overruns,
+                 invalid_frames;
+         int16_t vcc_mv,
+                 temp_celsius;
+         uint8_t nbits;
+    } desc_reply;
+    uint8_t byte_data[0];
+} tx_buf;
+
+void send_status_reply(void) {
+    tx_buf.desc_reply.firmware_version = FIRMWARE_VERSION;
+    tx_buf.desc_reply.hardware_version = HARDWARE_VERSION;
+    tx_buf.desc_reply.digit_rows = NROWS;
+    tx_buf.desc_reply.digit_cols = NCOLS;
+    tx_buf.desc_reply.uptime_s = sys_time_seconds;
+    tx_buf.desc_reply.vcc_mv = adc_vcc_mv;
+    tx_buf.desc_reply.temp_celsius = adc_temp_celsius;
+    tx_buf.desc_reply.nbits = nbits;
+    tx_buf.desc_reply.framerate_millifps = frame_duration_us > 0 ? 1000000000 / frame_duration_us : 0;
+    tx_buf.desc_reply.uart_overruns = uart_overruns;
+    tx_buf.desc_reply.frame_overruns = frame_overruns;
+    tx_buf.desc_reply.invalid_frames = invalid_frames;
+    send_frame_formatted(tx_buf.byte_data, sizeof(tx_buf.desc_reply));
+}
+
 /* This is the higher-level protocol handler for the serial protocol. It gets passed the number of data bytes in this
  * frame (which may be zero) and returns a pointer to the buffer where the next frame should be stored.
  */
 volatile uint8_t *packet_received(int len) {
     static enum {
-        PROT_EXPECT_FRAME_FIRST_HALF = 0,
+        PROT_ADDRESSED = 0,
         PROT_EXPECT_FRAME_SECOND_HALF = 1,
         PROT_IGNORE = 2,
     } protocol_state = PROT_IGNORE; 
@@ -463,15 +473,32 @@ volatile uint8_t *packet_received(int len) {
             send_frame_formatted((uint8_t*)&device_mac, sizeof(device_mac));
         }
 
+    } else if (len == 1) { /* Command packet */
+        if (protocol_state == PROT_ADDRESSED) {
+            switch (rx_buf.byte_data[0]) {
+            case 0x01:
+                GPIOA->BSRR = GPIO_BSRR_BS_4; // Debug
+                //for (int i=0; i<100; i++)
+                //    tick();
+                send_status_reply();
+                GPIOA->BSRR = GPIO_BSRR_BR_4; // Debug
+                break;
+            }
+        } else {
+            invalid_frames++;
+            trigger_error_led();
+        }
+        protocol_state = PROT_IGNORE;
+
     } else if (len == 4) { /* Address packet */
         if (rx_buf.mac_data == device_mac) { /* we are addressed */
-            protocol_state = PROT_EXPECT_FRAME_FIRST_HALF; /* start listening for frame buffer data */
+            protocol_state = PROT_ADDRESSED; /* start listening for frame buffer data */
         } else { /* we are not addressed */
             protocol_state = PROT_IGNORE; /* ignore packet */
         }
 
     } else if (len == sizeof(rx_buf.set_fb_rq)/2) {
-        if (protocol_state == PROT_EXPECT_FRAME_FIRST_HALF) { /* First of two half-framebuffer data frames */
+        if (protocol_state == PROT_ADDRESSED) { /* First of two half-framebuffer data frames */
             protocol_state = PROT_EXPECT_FRAME_SECOND_HALF;
             /* Return second half of receive buffer */
             return rx_buf.byte_data + (sizeof(rx_buf.set_fb_rq)/2);
@@ -494,7 +521,7 @@ volatile uint8_t *packet_received(int len) {
 
     } else {
         /* FIXME An invalid packet has been received. What should we do? */
-        invalid++;
+        invalid_frames++;
         trigger_error_led();
         protocol_state = PROT_IGNORE; /* go into "hang mode" until next zero-length packet */
     }
@@ -553,9 +580,8 @@ void USART1_IRQHandler(void) {
     /* COBS skip counter. During payload processing this contains the remaining non-null payload bytes */
     static int cobs_count = 0;
 
-    GPIOA->BSRR = GPIO_BSRR_BS_4; // Debug
     if (USART1->ISR & USART_ISR_ORE) { /* Overrun handling */
-        overruns++;
+        uart_overruns++;
         trigger_error_led();
         /* Reset and re-synchronize. Retry next frame. */
         rxpos = 0;
@@ -593,7 +619,6 @@ void USART1_IRQHandler(void) {
             }
         }
     }
-    GPIOA->BSRR = GPIO_BSRR_BR_4; // Debug
 }
 
 #define ADC_OVERSAMPLING 8
@@ -669,18 +694,6 @@ void adc_config(void) {
     NVIC_SetPriority(DMA1_Channel1_IRQn, 3);
 }
 
-/*
-    tx_buf.desc_reply.firmware_version = FIRMWARE_VERSION;
-    tx_buf.desc_reply.hardware_version = HARDWARE_VERSION;
-    tx_buf.desc_reply.digit_rows = NROWS;
-    tx_buf.desc_reply.digit_cols = NCOLS;
-    tx_buf.desc_reply.uptime = sys_time_seconds;
-    tx_buf.desc_reply.vcc_mv = adc_vcc_mv;
-    tx_buf.desc_reply.temp_tenth_celsius = adc_temp_tenth_celsius;
-    tx_buf.desc_reply.nbits = nbits;
-    tx_buf.desc_reply.millifps = frame_duration_us > 0 ? 1000000000 / frame_duration_us : 0;
-*/
-
 int main(void) {
     RCC->CR |= RCC_CR_HSEON;
     while (!(RCC->CR&RCC_CR_HSERDY));
diff --git a/fw/test.py b/fw/test.py
index a552816..695d9d5 100755
--- a/fw/test.py
+++ b/fw/test.py
@@ -1,5 +1,6 @@
 #!/usr/bin/env python3
 import serial
+import struct
 from itertools import takewhile
 
 def chunked(data, chunk_size):
@@ -50,10 +51,12 @@ def unstuff(data):
 def receive_frame(ser):
     return unstuff(read_frame(ser))
 
+def mac_frame(mac):
+    return frame_packet(struct.pack('<I', mac))
+
 def send_framebuffer(ser, mac, frame):
     formatted = format_packet(frame)
-    mac_packet = struct.pack('<I', mac)
-    framed = frame_packet(mac_packet) + frame_packet(formatted[:162]) + frame_packet(formatted[162:])
+    framed = mac_frame(mac) + frame_packet(formatted[:162]) + frame_packet(formatted[162:])
     ser.write(framed)
 
 def discover_macs(ser, count=20):
@@ -72,10 +75,32 @@ def discover_macs(ser, count=20):
             print('Invalid frame of length {}:'.format(len(frame)), frame)
         time.sleep(0.05)
 
+def parse_status_frame(frame):
+    print('frame len:', len(frame))
+    (   firmware_version, 
+        hardware_version, 
+        digit_rows, 
+        digit_cols, 
+        uptime_s, 
+        framerate_millifps, 
+        uart_overruns, 
+        frame_overruns, 
+        invalid_frames, 
+        vcc_mv, 
+        temp_celsius, 
+        nbits ) = struct.unpack('<4B5IhhB', frame)
+    del frame
+    return locals()
+
+def fetch_status(ser, mac):
+    ser.flushInput()
+    ser.write(mac_frame(mac))
+    ser.write(frame_packet(b'\x01'))
+    return parse_status_frame(receive_frame(ser))
+
 if __name__ == '__main__':
     import argparse
     import time
-    import struct
     from binascii import hexlify
     
     parser = argparse.ArgumentParser()
@@ -95,10 +120,15 @@ if __name__ == '__main__':
     #frames = [red, black]*5
     #frames = [ x for l in [[([0]*i+[255]+[0]*(7-i))*32]*2 for i in range(8)] for x in l ]
     found_macs = discover_macs(ser, 1)
+    mac, = found_macs
+
+    import pprint
+    while True:
+        pprint.pprint(fetch_status(ser, mac))
+        time.sleep(0.02)
 
     while True:
         for i, frame in enumerate(frames):
-            mac, = found_macs
             send_framebuffer(ser, mac, frame)
             print('sending', i, len(frame))
             time.sleep(0.02)
diff --git a/hw/chibi/chibi_2024/bom-chibi.ods b/hw/chibi/chibi_2024/bom-chibi.ods
index 0cafd5e..5b05ffe 100644
Binary files a/hw/chibi/chibi_2024/bom-chibi.ods and b/hw/chibi/chibi_2024/bom-chibi.ods differ
-- 
cgit