aboutsummaryrefslogtreecommitdiff
path: root/fw/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'fw/main.c')
-rw-r--r--fw/main.c157
1 files changed, 41 insertions, 116 deletions
diff --git a/fw/main.c b/fw/main.c
index 50c9cfa..7740426 100644
--- a/fw/main.c
+++ b/fw/main.c
@@ -1,5 +1,4 @@
-
-
+/* Workaround for sub-par ST libraries */
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wstrict-aliasing"
#include <stm32f0xx.h>
@@ -17,72 +16,9 @@
#include "transpose.h"
#include "mac.h"
-/*
- * Part number: STM32F030F4C6
- */
-
-typedef struct
-{
- volatile uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
- volatile uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
- volatile uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
- volatile uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
- volatile uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
- volatile uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
- volatile uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
- volatile uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
- volatile uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
- volatile uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
- volatile uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
- uint32_t RESERVED0[1];
- volatile uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
- volatile uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
- volatile uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
- uint32_t RESERVED1[1];
-} DWT_Type;
-
-#define DWT ((DWT_Type *)0xE0001000)
-DWT_Type *dwt = DWT;
-
-void dwt0_configure(volatile void *addr) {
- dwt->COMP0 = (uint32_t)addr;
- dwt->MASK0 = 0;
-}
-
-enum DWT_Function {
- DWT_R = 5,
- DWT_W = 6,
- DWT_RW = 7
-};
-
-void dwt0_enable(enum DWT_Function function) {
- dwt->FUNCTION0 = function;
-}
-
-/* Wait for about 0.2us */
-static void tick(void) {
- /* 1 */ /* 2 */ /* 3 */ /* 4 */ /* 5 */
- /* 5 */ __asm__("nop"); __asm__("nop"); __asm__("nop"); __asm__("nop"); __asm__("nop");
- /* 10 */ __asm__("nop"); __asm__("nop"); __asm__("nop"); __asm__("nop"); __asm__("nop");
-}
-
-void spi_send(int data) {
- SPI1->DR = data;
- while (SPI1->SR & SPI_SR_BSY);
-}
-
-void strobe_aux(void) {
- GPIOA->BSRR = GPIO_BSRR_BS_10;
- tick();
- GPIOA->BSRR = GPIO_BSRR_BR_10;
-}
-
-void strobe_leds(void) {
- GPIOA->BSRR = GPIO_BSRR_BS_9;
- tick();
- GPIOA->BSRR = GPIO_BSRR_BR_9;
-}
+/* Microcontroller part number: STM32F030F4C6 */
+/* Things used for module status reporting. */
#define FIRMWARE_VERSION 2
#define HARDWARE_VERSION 4
@@ -97,6 +33,18 @@ volatile uint16_t adc_buf[2];
volatile unsigned int sys_time = 0;
volatile unsigned int sys_time_seconds = 0;
+/* Error counters for debugging */
+static unsigned int uart_overruns = 0;
+static unsigned int frame_overruns = 0;
+static unsigned int invalid_frames = 0;
+
+/* Status LED control */
+#define LED_STRETCHING_MS 50
+static volatile int error_led_timeout = 0;
+static volatile int comm_led_timeout = 0;
+static volatile int id_led_timeout = 0;
+
+/* Modulation data */
volatile struct framebuf fb[2] = {0};
volatile struct framebuf *read_fb=fb+0, *write_fb=fb+1;
volatile int led_state = 0;
@@ -108,45 +56,13 @@ volatile union {
uint32_t mac_data;
} rx_buf;
+/* Auxiliary shift register values */
#define LED_COMM 0x0001
#define LED_ERROR 0x0002
#define LED_ID 0x0004
#define SR_ILED_HIGH 0x0080
#define SR_ILED_LOW 0x0040
-unsigned int stk_start(void) {
- return SysTick->VAL;
-}
-
-unsigned int stk_end(unsigned int start) {
- return (start - SysTick->VAL) & 0xffffff;
-}
-
-unsigned int stk_microseconds(void) {
- return sys_time*1000 + (1000 - (SysTick->VAL / (SystemCoreClock/1000000)));
-}
-
-void cfg_spi1() {
- /* Configure SPI controller */
- SPI1->I2SCFGR = 0;
- SPI1->CR2 &= ~SPI_CR2_DS_Msk;
- SPI1->CR2 &= ~SPI_CR2_DS_Msk;
- SPI1->CR2 |= LL_SPI_DATAWIDTH_16BIT;
-
- /* Baud rate PCLK/4 -> 12.5MHz */
- SPI1->CR1 =
- SPI_CR1_BIDIMODE
- | SPI_CR1_BIDIOE
- | SPI_CR1_SSM
- | SPI_CR1_SSI
- | SPI_CR1_SPE
- | (1<<SPI_CR1_BR_Pos)
- | SPI_CR1_MSTR
- | SPI_CR1_CPOL
- | SPI_CR1_CPHA;
- /* FIXME maybe try w/o BIDI */
-}
-
/* This is a lookup table mapping segments to present a standard segment order on the UART interface. This is converted
* into an internal representation once on startup in main(). The data type must be at least uint16. */
uint32_t segment_map[8] = {5, 7, 6, 4, 1, 3, 0, 2};
@@ -287,6 +203,7 @@ void cfg_timers_led() {
}
void TIM1_CC_IRQHandler() {
+ //static int last_frame_time = 0;
/* This handler takes about 1.5us */
GPIOA->BSRR = GPIO_BSRR_BS_0; // Debug
@@ -299,11 +216,6 @@ void TIM1_CC_IRQHandler() {
if (active_segment == NSEGMENTS) {
active_segment = 0;
- /* FIXME remove this?
- int time = stk_microseconds();
- frame_duration_us = time - last_frame_time;
- last_frame_time = time;
- */
/* Frame buffer swap */
if (fb_op == FB_UPDATE) {
volatile struct framebuf *tmp = read_fb;
@@ -319,6 +231,8 @@ void TIM1_CC_IRQHandler() {
uint32_t aux_reg = (read_fb->brightness ? SR_ILED_HIGH : SR_ILED_LOW) | (led_state<<1);
SPI1->DR = aux_reg | segment_map[active_segment];
+ /* TODO: Measure frame rate for status report */
+
/* Clear interrupt flag */
TIM1->SR &= ~TIM_SR_CC1IF_Msk;
@@ -355,6 +269,27 @@ void TIM3_IRQHandler() {
GPIOA->BSRR = GPIO_BSRR_BR_0; // Debug
}
+void cfg_spi1() {
+ /* Configure SPI controller */
+ SPI1->I2SCFGR = 0;
+ SPI1->CR2 &= ~SPI_CR2_DS_Msk;
+ SPI1->CR2 &= ~SPI_CR2_DS_Msk;
+ SPI1->CR2 |= LL_SPI_DATAWIDTH_16BIT;
+
+ /* Baud rate PCLK/4 -> 12.5MHz */
+ SPI1->CR1 =
+ SPI_CR1_BIDIMODE
+ | SPI_CR1_BIDIOE
+ | SPI_CR1_SSM
+ | SPI_CR1_SSI
+ | SPI_CR1_SPE
+ | (1<<SPI_CR1_BR_Pos)
+ | SPI_CR1_MSTR
+ | SPI_CR1_CPOL
+ | SPI_CR1_CPHA;
+ /* FIXME maybe try w/o BIDI */
+}
+
void uart_config(void) {
USART1->CR1 = /* 8-bit -> M1, M0 clear */
/* RTOIE clear */
@@ -383,11 +318,6 @@ void uart_config(void) {
NVIC_SetPriority(USART1_IRQn, 1);
}
-#define LED_STRETCHING_MS 50
-static volatile int error_led_timeout = 0;
-static volatile int comm_led_timeout = 0;
-static volatile int id_led_timeout = 0;
-
void trigger_error_led() {
error_led_timeout = LED_STRETCHING_MS;
}
@@ -400,11 +330,6 @@ void trigger_id_led() {
id_led_timeout = LED_STRETCHING_MS;
}
-/* Error counters for debugging */
-static unsigned int uart_overruns = 0;
-static unsigned int frame_overruns = 0;
-static unsigned int invalid_frames = 0;
-
void tx_char(uint8_t c) {
while (!(USART1->ISR & USART_ISR_TC));
USART1->TDR = c;
@@ -761,7 +686,7 @@ int main(void) {
/* Clear frame buffer */
read_fb->brightness = 1;
for (int i=0; i<sizeof(read_fb->data)/sizeof(uint32_t); i++) {
- read_fb->data[i] = 0xffffffff; /* FIXME DEBUG 0x00000000; */
+ read_fb->data[i] = 0xffffffff; /* FIXME this is a debug value. Should be 0x00000000; */
}
cfg_timers_led();
generated by cgit (git 2.34.1) at 2024-11-17 21:23:02 +0000